Spatial and temporal variations of suspended solid concentrations from 2000 to 2013 in Poyang Lake,China

Concentrations of suspended solids in lakes can affect the latter’s primary productivity and reflect changes in sediment deposition. Determining the temporal and spatial distribution of suspended solid concentrations has important significance in lake water environmental management; this is particularly urgent for Poyang Lake, the largest freshwater lake in China. In this study, suspended solid concentration inversion models for Poyang Lake were created using a semi-empirical method with regression analysis between continuously measured suspended solid concentration data and multi-band moderate-resolution imaging spectroradiometer images for spring, summer, autumn, and winter from 2009 to 2012. The coefficient of determination (R²) is from 0.6 to 0.9 and the average relative error for the accuracy verification was between 10 and 30%. The seasonal distributions of suspended solid concentrations in Poyang Lake from 2000 to 2013 were then obtained using optimal reversal models. The results showed that the seasonal variation in suspended solid concentrations had a “W” shape in which high spring and autumn and low summer and winter values. The suspended solid concentrations increased annually from 2000 to 2013 and were mainly distributed in the northern and central portions of the lake, with lower values along the shorelines. Further analysis indicated that the large difference in water level between the wet and dry seasons is an important factor in explaining these seasonal variations. Moreover, the suspended solid concentrations were poorly correlated with water temperature and chlorophyll-a concentration but more highly correlated with the deferred chlorophyll-a concentration.     

Semi-analytical solutions for vertically and laterally loaded piles in multilayered soil deposits

In geotechnical practice, it is of considerable importance to assess the behavior of vertical–lateral coupled loading piles in multilayered soil deposits. This study deals with a semi-analytical formulation for the performance of a pile suffering from combined vertical and lateral loads. The emphasis is on quantifying the mobilization of the subgrade reaction provided by the layered soil stratums. In the proposed method, subgrade reactions, correlated with both the accumulative axial load transfer and side resistances depending upon the pile–soil interaction, are abstracted as a series of nonlinear springs in both vertical and lateral directions. On account of this, an alternative transfer matrix method is applied to characterize the pile reaction along the depth under the identified boundary conditions atop the pile; meanwhile, the condition of static equilibrium, between two specific pile segments located at the border of soil layers, is also essential. On this basis, validation of the solution is conducted by comparing with observations from experiments and predictions obtained from other existing methods. In addition, the influence of properties in shallow soil layer and the vertical load on the lateral response of the pile is also discussed. The results indicate a reduction in the lateral displacement and the maximum bending moment within the pile with the increase in the shallow soil stiffness, but a growth with the increase in vertical load due to the “P-Δ effect.”     

The influence of the Three Gorges Reservoir regulation on a typical tributary heat budget

Reservoir regulation and local climate both affect the heat budget of tributary bay. It is difficult for traditional methods to identify the influence of different factors on heat budget quantitatively. In this paper, for analysis of the control mechanisms of the heat budget of a large reservoir tributary, the water temperature distribution, and heat budget processes of the Meixi River, a typical tributary to the Three Gorges Reservoir was measured, and a new method was used to calculate the heat content composition of the tributary bay and identify the key factor of the heat balance. The result shows significant variation in the spatial and temporal distributions of water temperatures in the Meixi River, ranging from 12.4 to 28.9 °C on the surface and 12.0 to 24.4 °C at the bottom. The total heat exchange across the air–water interface that ranges from 0.1 to 6% of the budget is not the primary control factor of the annual tributary heat budget. Rather, the change in water depth produced by regulation of the Three Gorges Reservoir is the primary control factor of the tributary heat budget in the whole year, which ranges from 72 to 99% of the budget. The water temperature difference between the main stream and tributary is the not key factor of the heat budget, which ranges from 0.1 to 28% of the heat budget.     

基于GF-2影像西藏桑耶地区岩性-构造遥感解译

西藏桑耶地区位于青藏高原中南部,区内切割强烈,地势陡峻,属于高山峡谷区。为提高区域地质调查野外工作效率,在调查中率先开展了遥感解译研究。在充分收集已有资料的基础上,通过对GF-2卫星数据进行预处理和影像增强,结合野外验证建立了各地质要素的遥感解译标志,实现了区内不同地层岩性、侵入岩、断裂和褶皱等地质要素的提取,最终编制了研究区1:5万遥感地质解译图,为区域地质调查提供了数据支撑。结果表明: 各地质要素在GF-2数据上均有良好反映,完全满足1:5万尺度的遥感地质解译和编图的需要,充分显示出该卫星数据在区域地质调查等工作中具有良好的应用前景。     

Synthesis and characterisation of a multifunctional oil-based drilling fluid additive

An oil-based drilling fluid additive H-DEA (or humic acid-cocamide diethanolamine) was synthesised using humic acid and cocamide diethanolamine as raw materials. The rheological behaviors of H-DEA showed that the synthesised product has the good properties in both decreasing the filtrate loss and improving rheology property of oil-based drilling fluids compared with other commercially available additives. Under the optimal additive amount of 3%, both API filtrate loss and yield point changed remarkably from 5.40 to 0.41 mL and 9.0 to 25.6 Pa, respectively. Furthermore, differential scanning calorimetry (DSC) showed that H-DEA has good thermal stability in a wide temperature range up to 170 °C. Infrared spectroscopy (IR) and rheological analysis revealed that the possible mechanism of the multifunctional effects may be attributed to the existing of high density of strong polar groups, hydrogen bonds, electrostatic forces, and intermolecular association on H-DEA molecular structure. The results of the study showed that the synthesised H-DEA can be potentially used as a multifunctional oil-based drilling fluid additive in oil-drilling excavation.     

Dynamical evolution properties of debris flows controlled by different mesh-sized flexible net barriers

Because the flexible net barrier is a gradually developed open-type debris-flow counter-measure, there are still uncertainties in its design criterion. By using several small-scale experimental flume model tests, the dynamical evolution properties of debris flows controlled by large and small mesh-sized (equal to D₉₀ and D₅₀, respectively) flexible net barriers are studied, including the debris flow behaviors, segregation, and permeability of sediments, as well as the energy absorption rates and potential overtopping occurring when debris flows impact the small mesh-sized one. Experimental results reveal that (a) two sediment deposition patterns are observed depending on variations in debris flow textures and mesh sizes; (b) the aggregation against flexible net barriers is dominated by flow dynamics; (c) the segregation and permeable functions of the barrier are determined by the mesh size, concentration, and flow dynamics; and (d) the smaller mesh-sized flexible net barrier tends to be more efficient in restraining more turbulent debris flows and can absorb greater rate of kinematic energy, and finally, the great kinematic energy dissipation that occurs when secondary debris flows interact with the post-deposits in front of the small mesh-sized flexible net barrier is believed to cause the failure of overtopping phenomenon. The mesh size is concluded to be the decisive parameter that should be associated with debris flow textures to design the control functions of flexible net barriers.     

A direction-dependent shear strength criterion for rock joints with two new roughness parameters

The surface morphology of a rock joint is closely related to its mechanical properties. To reasonably characterize a rock surface, two new roughness parameters were proposed in this paper. One is related to the average slope angle of asperities that contribute to the shear strength, and the other reflects the frictional behavior of asperities that is defined as the maximum possible contact area in the shear direction. Taking the standard joint roughness coefficient profiles as example, these two roughness parameters can be applied to describe the directional characteristics of shear strength. Based on their relationships with initial dilation angles, the proposed roughness parameters were incorporated into a peak shear strength criterion. It is shown that the predicted peak shear strength is consistent with experimental data, and there is a power–law relationship. The application range of new roughness parameters was determined, which may facilitate a measurement process.     

Electrical conductivity of the plagioclase–NaCl–water system and its implication for the high conductivity anomalies in the mid-lower crust of Tibet Plateau

In order to investigate the origin of the high conductivity anomalies geophysically observed in the mid-lower crust of Tibet Plateau, the electrical conductivity of plagioclase–NaCl–water system was measured at 1.2 GPa and 400–900 K. The relationship between electrical conductivity and temperature follows the Arrhenius law. The bulk conductivity increases with the fluid fraction and salinity, but is almost independent of temperature (activation enthalpy less than 0.1 eV). The conductivity of plagioclase–NaCl–water system is much lower than that of albite–NaCl–water system with similar fluid fraction and salinity, indicating a strong effect of the major mineral phase on the bulk conductivity of the brine-bearing system. The high conductivity anomalies of 10^?1 and 10⁰ S/m observed in the mid-lower crust of Tibet Plateau can be explained by the aqueous fluid with a volume fraction of 1 and 9%, respectively, if the fluid salinity is 25%. The anomaly value of 10^?1 S/m can be explained by the aqueous fluid with a volume fraction of 6% if the salinity is 10%. In case of Southern Tibet where the heat flow is high, the model of a thin layer of brine-bearing aqueous fluid with a high salinity overlying a thick layer of partial melt is most likely to prevail.     

An experimental study of Fe–Ni exchange between sulfide melt and olivine at upper mantle conditions: implications for mantle sulfide compositions and phase equilibria

The behavior of nickel in the Earth’s mantle is controlled by sulfide melt–olivine reaction. Prior to this study, experiments were carried out at low pressures with narrow range of Ni/Fe in sulfide melt. As the mantle becomes more reduced with depth, experiments at comparable conditions provide an assessment of the effect of pressure at low-oxygen fugacity conditions. In this study, we constrain the Fe–Ni composition of molten sulfide in the Earth’s upper mantle via sulfide melt–olivine reaction experiments at 2 GPa, 1200 and 1400 °C, with sulfide melt \(X_{{{\text{Ni}}}}^{{{\text{Sulfide}}}}=\frac{{{\text{Ni}}}}{{{\text{Ni}}+{\text{Fe}}}}\) (atomic ratio) ranging from 0 to 0.94. To verify the approach to equilibrium and to explore the effect of \({f_{{{\text{O}}_{\text{2}}}}}\) on Fe–Ni exchange between phases, four different suites of experiments were conducted, varying in their experimental geometry and initial composition. Effects of Ni secondary fluorescence on olivine analyses were corrected using the PENELOPE algorithm (Baró et al., Nucl Instrum Methods Phys Res B 100:31–46, 1995), “zero time” experiments, and measurements before and after dissolution of surrounding sulfides. Oxygen fugacities in the experiments, estimated from the measured O contents of sulfide melts and from the compositions of coexisting olivines, were 3.0?±?1.0 log units more reduced than the fayalite–magnetite-quartz (FMQ) buffer (suite 1, 2 and 3), and FMQ ??1 or more oxidized (suite 4). For the reduced (suites 1–3) experiments, Fe–Ni distribution coefficients \(K_{{\text{D}}}^{{}}=\frac{{(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}/X_{{{\text{Fe}}}}^{{{\text{sulfide}}}})}}{{(X_{{{\text{Ni}}}}^{{{\text{olivine}}}}/X_{{{\text{Fe}}}}^{{{\text{olivine}}}})}}\) are small, averaging 10.0?±?5.7, with little variation as a function of total Ni content. More oxidized experiments (suite 4) give larger values of K_D (21.1–25.2). Compared to previous determinations at 100 kPa, values of K_D from this study are chiefly lower, in large part owing to the more reduced conditions of the experiments. The observed difference does not seem attributable to differences in temperature and pressure between experimental studies. It may be related in part to the effects of metal/sulfur ratio in sulfide melt. Application of these results to the composition of molten sulfide in peridotite indicates that compositions are intermediate in composition (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.4–0.6) in the shallow mantle at 50 km, becomes more Ni rich with depth as the O content of the melt diminishes, reaching a maximum (0.6–0.7) at depths near 80–120 km, and then becomes more Fe rich in the deeper mantle where conditions are more reduced, approaching (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.28)?>?140 km depth. Because Ni-rich sulfide in the shallow upper mantle melts at lower temperature than more Fe-rich compositions, mantle sulfide is likely molten in much of the deep continental lithosphere, including regions of diamond formation.