皖北地区五河杂岩温压结构及年代学研究

蚌埠隆起位于华北克拉通南部,胶辽吉造山带的南端,主要由凤阳群和五河杂岩构成。五河杂岩的研究主要集中于年代学以及地球化学领域,其变质P-T 条件和地层剖面等研究相对较弱。本文试图从变质岩石学、构造地质学和锆石年代学角度构建朱顶-石门山一线的地壳剖面。通过大量的P-T 条件评价,确定了朱顶单元、庄子里单元和石门山单元之间的区别和界限,其中朱顶单元温压结果为低压麻粒岩相：T=720 ℃～840 ℃,P=0.90～1.33 GPa;庄子里单元温压结果同为低压麻粒岩相,但温度和压力均低于前者：T=700 ℃～820 ℃,P=0.50～0.90 GPa;石门山单元因岩性限制,仅用白云母Ti温度计拟合计算,结果为低压角闪岩相： T=610 ℃～700 ℃, P=0.30～0.50 GPa。锆石U-Pb 定年获得的变质年龄为2 413±22Ma,与前人研究结果基本一致。此外,庄子里地区岩体和磨盘山岩体的锆石U-Pb 年龄晚于2.5～2.4 Ga,因此应属于后期侵入岩,计算剖面厚度时要考虑岩体厚度的影响。研究区的岩层产状在45°～60°之间,按照两个极端值计算（不考虑岩体厚度）时获得地壳总厚度为16 km,结合3 条糜棱岩带的存在,其应属于中-上地壳的物质组成部分。朱顶-石门山一线的地壳剖面,自南向北,以白石山和磨盘山岩体为界,依次为上地壳、中-上地壳和下地壳,温压条件自南向北呈递增趋势。     

Calcium Isotopic Compositions of Sixteen USGS Reference Materials

Calcium isotopic compositions of sixteen Ca‐bearing USGS geological reference materials including igneous and sedimentary rocks are reported. Calcium isotopic compositions were determined in two laboratories (GPMR, State Key Laboratory of Geological Processes and Mineral Resources, China University of Geosciences, Wuhan; and CIG, Centre for Isotope Geochemistry, University of California, Berkeley) using the ⁴²Ca‐⁴⁸Ca double‐spike technique by thermal ionisation mass spectrometry. As opposed to common cation exchange resin, a micro‐column filled with Ca‐selective resin (DGA resin) was used in order to achieve high recovery (> 96%) and efficient separation of Ca from the sample matrix. The intermediate measurement precision was evaluated at 0.14‰ (2s) for δ^44/40Ca_SRM915a at GPMR, based on replicate measurements of pure Ca reference material NIST SRM 915a, NIST SRM 915b and seawater. Overall, the measurement uncertainties in both laboratories were better than 0.15‰ at the 2s level. Result validation was carried out for all available data sets. The Ca isotopic compositions of USGS reference materials are not only in agreement between GPMR and CIG, but also in agreement with previously published data within quoted uncertainties. The comprehensive data set reported in this study serves as a reference for both quality assurance and interlaboratory comparison of high precision Ca isotopic study.     

Genome-wide mining,characterization, and development of microsatellite markers in <Emphasis Type="Italic">Marsupenaeus japonicus</Emphasis> by genome survey sequencing

The kuruma prawn, Marsupenaeus japonicus, is one of the most cultivated and consumed species of shrimp. However, very few molecular genetic/genomic resources are publically available for it. Thus, the characterization and distribution of simple sequence repeats (SSRs) remains ambiguous and the use of SSR markers in genomic studies and marker-assisted selection is limited. The goal of this study is to characterize and develop genome-wide SSR markers in M. japonicus by genome survey sequencing for application in comparative genomics and breeding. A total of 326 945 perfect SSRs were identified, among which dinucleotide repeats were the most frequent class (44.08%), followed by mononucleotides (29.67%), trinucleotides (18.96%), tetranucleotides (5.66%), hexanucleotides (1.07%), and pentanucleotides (0.56%). In total, 151 541 SSR loci primers were successfully designed. A subset of 30 SSR primer pairs were synthesized and tested in 42 individuals from a wild population, of which 27 loci (90.0%) were successfully amplified with specific products and 24 (80.0%) were polymorphic. For the amplified polymorphic loci, the alleles ranged from 5 to 17 (with an average of 9.63), and the average PIC value was 0.796. A total of 58 256 SSR-containing sequences had significant Gene Ontology annotation; these are good functional molecular marker candidates for association studies and comparative genomic analysis. The newly identified SSRs significantly contribute to the M. japonicus genomic resources and will facilitate a number of genetic and genomic studies, including high density linkage mapping, genome-wide association analysis, marker-aided selection, comparative genomics analysis, population genetics, and evolution.     

夜间灯光数据驱动的成渝城市群空间形成过程重建及分析

2016年4月发布的《成渝城市群发展规划》首次正式确定了成渝城市群的内涵和具体边界,重建成渝城市群的形成过程,有利于把握未来发展趋势,并合理优化与调整其发展过程。在重建技术方面,对DMSP/OLS夜间灯光数据传统的不变目标区域校正法加以改进,将成渝城市群2013年城市市区范围内的全部像元加入校正模型的拟合中,设计了统计数据的校正规则,再通过二分比较法较好地恢复了成渝城市群内各城市建成区的时序空间信息。提取面积与统计面积总体平均相对误差为-0.38%,利用高分辨率Google Earth图像验证的建成区提取准确率达到98.29%,相比其他研究结果,经方法改进后的提取结果精度高且稳定。在结果分析方面,基于提取结果展开对城市群建成区重心转移过程与城市聚合过程的深层次研究,剖析了城市群的内部格局与时空变化特征。分析表明,成渝城市群的聚合情况与《成渝城市群发展规划》高度吻合,城市群已进入快速发育阶段,随着区域差异的持续扩大,成都、重庆都市圈的核心地位逐渐形成,而重庆的发展态势稍好。     

The influence of the corrosion product layer generated on the high strength low-alloy steels welded by underwater wet welding with stainless steel electrodes in seawater

The high strength low-alloy steels are welded by underwater wet welding with stainless steel electrodes. The micro-structural and electrochemical corrosion study of base metal (BM), weld zone (WZ) and heat affected zone (HAZ) are carried out to understand the influence of the corrosion product layer generated on the high strength low-alloy steels welded by underwater wet welding with stainless steel electrodes, methods used including, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and scanning electron microscope (SEM). The results indicate that the WZ acts as a cathode and there is no corrosion product on it throughout the immersion period in seawater. The HAZ and BM acts as anodes. The corrosion rates of the HAZ and BM change with the immersion time increasing. In the initial immersion period, the HAZ has the highest corrosion rate because it has a coarse tempered martensite structure and the BM exhibites a microstructure with very fine grains of ferrite and pearlite. After a period of immersion, the BM has the highest corrosion rate. The reason is that the corrosion product layer on the HAZ is dense and has a better protective property while that on the BM is loose and can not inhibit the diffusion of oxygen.     

山东省乳山市宋家庄金矿床地质特征研究

山东省乳山市宋家庄金矿区位于牟平-乳山金矿带中南部,受青虎山-唐家沟断裂及次级断裂构造和中生代玲珑花岗岩的共同控制,矿体赋存于NNE向断裂构造中,矿体的顶、底板围岩为含金硅化花岗碎裂岩。矿床成因类型为中温热液充填型金矿床。根据矿床地质特征,通过对矿体特征、矿石质量、围岩蚀变及矿床成因等方面的研究,总结其成矿规律,受断裂构造控制的热液型金矿床,一般具有延深大于延长的特点,该区深部找矿潜力较大,对青虎山-唐家沟断裂及次级断裂中找矿具有一定的指导意义。     

���ŵ����������򶨹��Ӳ�Ӱ�쾫�ȷ���

?????????????????????????????У????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????μ???????????????????????????????????????????????????????????????й?????????????????????????????????????????????????????????????????????????????????????????????????????????,?????????λ?t?????????2 m??10 m??     

Numerical simulations of the coastal effects of tsunami waves caused by the 1993 Hokkaido-Nansei-Oki earthquake

Generally, tsunami waves become hazardous only when approaching the coast. Studying the runup and inundation of tsunami waves is important for understanding the tsunami evolution and for tsunami hazard assessment. Here, we simulated the 1993 Hokkaido-Nansei-Oki (HNO) tsunami using a finite-difference model based on nonlinear shallow-water equations. We focused on the runup and inundation of tsunami wave propagation onto coastal area of Okushiri Island near Hokkaido, Japan, and investigate the relationship of different runup heights with the morphology and bathymetry of the seashore. In the simulation, a nested 4-layer grid system and moving boundary technique are adopted to study runup and inundation. The calculated tsunami heights and inundations in the region agreed well with field measurements. The local bathymetric and topographic characteristics had a first-order effect on the runup. Numerical experiments show that the focusing of certain local bathymetric features would amplify both wave height and current velocity remarkably. The results show that computation on dense grids is necessary to reproduce the observed runup heights, and inundation velocity is an important factor preventing tsunami devastation. In addition, we discussed the potential capability of sediment transport to illustrate the impact of tsunami waves on coastal geomorphology.     

油藏地质建模及实时跟踪研究

为了提高采收率,降低开发风险,以滩海地区某油田为研究对象,结合地质、测井、地震等资料,对该油藏进行实时跟踪地质特征综合研究。应用地质建模、随钻测井、地质导向等技术,建立了精细的三维地质导向模型,并根据随钻测井数据和综合地质信息,实时验证构造和储集层信息,对导向模型不断校正,使模型与实钻结果一致,还以该模型为基础,优化水平井钻井的前进轨迹。结果表明,此种方法的应用降低了海上油田开发风险,能取得良好的开发效果。     

流沙湾底栖贝类耐污值的研究

于2008年3月～2009年1月在流沙湾设7采样站,对底栖贝进行了6次采样调查。用Lenat耐污值估算方法对流沙湾底栖贝类耐污进行分析,建立16个分类单元(科)贝类的耐污值谱。结果表明,16个分类单元(科)的耐污值均在6.5以上,其中骨螺科、织纹螺科和汇螺科的耐污值为10.0;马蹄螺科、笔螺科和帘蛤科耐污值在9.0~9.9之间;蚶科、贻贝科、牡蛎科、樱蛤科、竹蛏科、绿螂科、牙螺科和钥孔虫戚科在8.0~8.9之间;蟹守螺科与滨螺科在6.0~7.0之间。流沙湾大多数贝类的耐污值集中于耐污值谱的高端(≥8.0),水体的环境梯度值处于较高值,说明流沙湾已处于中度到高度的污染水平。