Fingerprinting TCE in a bedrock aquifer using compound-specific isotope analysis

A dual isotope approach based on compound-specific isotope analysis (CSIA) of carbon (C) and chlorine (Cl) was used to identify sources of persistent trichloroethylene (TCE) that caused the shut-down in 1994 of a municipal well in an extensive fractured dolostone aquifer beneath Guelph, Ontario. Several nearby industrial properties have known subsurface TCE contamination; however, only one has created a comprehensive monitoring network in the bedrock. The impacted municipal well and many monitoring wells were sampled for volatile organic compounds (VOCs), inorganic parameters, and CSIA. A wide range in isotope values was observed at the study site. The TCE varies between -35.6‰ and -21.8‰ and from 1.6‰ to 3.2‰ for δ(13) C and δ(37) Cl, respectively. In case of cis-1,2-dichloroethene, the isotope values range between -36.3‰ and -18.9‰ and from 2.4‰ to 4.7‰ for δ(13) C and δ(37) Cl, respectively. The dual isotope approach represented by a plot of δ(13) C vs. δ(37) Cl shows the municipal well samples grouped in a domain clearly separate from all other samples from the property with the comprehensive well network. The CSIA results collected under non-pumping and short-term pumping conditions thus indicate that this particular property, which has been studied intensively for several years, is not a substantial contributor of the TCE presently in the municipal well under non-pumping conditions. This case study demonstrates that CSIA signatures would have been useful much earlier in the quest to examine sources of the TCE in the municipal well if bedrock monitoring wells had been located at several depths beneath each of the potential TCE-contributing properties. Moreover, the CSIA results show that microbial reductive dechlorination of TCE occurs in some parts of the bedrock aquifer. At this site, the use of CSIA for C and Cl in combination with analyses of VOC and redox parameters proved to be important due to the complexity introduced by biodegradation in the complex fractured rock aquifer. It is highly recommended to revisit the study when the municipal well is back into full operation.     

Applications of a total dissolved gas pressure probe in ground water studies

Measurements of dissolved gases have numerous applications in ground water hydrology, and it is now possible to measure the total dissolved gas pressure in situ using a probe. Dissolved gas pressure is measured by submerging a headspace volume with a gas-permeable membrane, allowing dissolved gases in the water to equilibrate with gases in the headspace, then measuring the pressure in the headspace with a pressure transducer. Total dissolved gas pressure (TGP) probes have many potential uses in ground water studies employing dissolved gases, including: (1) determining approximate excess air levels, which may provide information about the time and location of recharge; (2) screening wells for air contamination, which can compromise the accuracy of dissolved gas tracer techniques: (3) detecting a trapped gas phase, which can significantly reduce hydraulic conductivity and impede the transport of dissolved solutes and gases; (4) enabling the use of gas-filled passive diffusion samplers for determining accurate dissolved gas concentrations; and (5) determining relative concentrations of CH4 and CO2 when they are known to be highly abundant. Although TGP probes designed for surface water have been available for several years, TGP probes suitable for ground water applications have only recently become available. Herein we present what are, to our knowledge, the first reported ground water dissolved gas data collected using a TGP probe. We also explain the basic operating principles of these probes and discuss the potential applications listed.     

Schumann Resonance and Sunspot Relations to Human Health Effects in Thailand

There is sensible scientific evidence to establish a trailof connection from the sun activity to human biological and health effects. This explains whysunspot numbers and indices of Geomagnetic Activity are correlated with serious human healtheffects in a large body of published studies. The key element is the role of the SchumannResonance signal that is detected by human brains and is used to synchronize diurnal andELF brain rhythms. The Schumann Resonance signal intensity is modulated and highlycorrelated with solar activity and the electron concentrations in the lowest layersof the ionosphere. The enhanced or weakened solar activity moves the level of the SRsignal outside the normal homeostatic range and, through the Melatonin mechanism, causeshealth problems and enhanced death rates in large human populations. A five-yearmonthly data-base is used to confirm the correlation between the climatic factors ofSunspot Number, Southern Oscillation Index and Global mean temperatureanomalies with the SR signal strength. The Sunspot Number emerges as the strongestfactor. A 19 year data-set of annual mortality rates in SE Asia is used to seek evidenceof correlations between human mortality rates and the sunspot number in order to supportand confirm the SR hypothesis. A wide range of mortalities that are associatedwith Melatonin reduction, are found to be significantly correlated with sunspot number,including cancer, cardiac and neurological mortality.     

A New Multilevel Ground Water Monitoring System Using Multichannel Tubing

A new multilevel ground water monitoring system has been developed that uses custom-extruded flexible 1.6-inch (4.1 cm) outside-diameter (O.D.) multichannel HOPE tubing (referred to as Continuous Multichannel Tubing or CMT) to monitor as many as seven discrete zones within a single borehole in either unconsolidated sediments or bedrock. Prior to inserting the tubing in the borehole, ports are created that allow ground water to enter six outer pie-shaped channels (nominal diameter = 0.5 inch [1.3 cm]) and a central hexagonal center channel (nominal diameter = 0.4 inch [1 cm]) at different depths, facilitating the measurement of depth-discrete piezometric heads and the collection of depth-discrete ground water samples. Sand packs and annular seals between the various monitored zones can be installed using conventional tremie methods. Alternatively, bentonite packers and prepacked sand packs have been developed that are attached to the tubing at the ground surface, facilitating precise positioning of annular seals and sand packs. Inflatable rubber packers for permanent or temporary installations in bedrock aquifers are currently undergoing site trials. Hydraulic heads are measured with conventional water-level meters or electronic pressure transducers to generate vertical profiles of hydraulic head. Ground water samples are collected using peristaltic pumps, small-diameter bailers, inertial lift pumps, or small-diameter canister samplers. For monitoring hydrophobic organic compounds, the CMT tubing is susceptible to both positive and negative biases caused by sorption, desorption, and diffusion. These biases can be minimized by: (1) purging the channels prior to sampling, (2) collecting samples from separate 0.25-inch (0.64 cm) O.D. Teflon sampling tubing inserted to the bottom of each sampling channel, or (3) collecting the samples downhole using sampling devices positioned next to the intake ports. More than 1000 CMT multilevel wells have been installed in North America and Europe to depths up to 260 feet (79 m) below ground surface. These wells have been installed in boreholes created in unconsolidated sediments and bedrock using a wide range of drilling equipment, including sonic, air rotary, diamond-bit coring, hollow-stem auger, and direct push. This paper presents a discussion of three field trials of the system, demonstrating its versatility and illustrating the type of depth-discrete data that can be collected with the system.     

A 300 year record of environmental change from Lake Tuborg, Ellesmere Island, Nunavut, Canada

Lamination thickness measurements in sediments from Lake Tuborg, northern Ellesmere Island, Canada document an increase in high-energy hydrologic discharge events from ∼1865 to 1962. The timing of these events corresponds with evidence for an increase in the amount of melt on the adjacent Agassiz Ice Cap, as recorded in ice cores. There appears to have been a non-linear change in depositional energy resulting from a dramatic increase in Agassiz meltwater discharge, particularly after ∼1908. A strong correlation between the Lake Tuborg varve thickness record, the amount of melting on the Agassiz Ice Cap and Eureka 900 mb air temperature records suggests that changes in the height of the freezing level in the atmosphere have affected the extent of summer melting on the Agassiz Ice Cap, leading to high volume discharge events and associated sediment flux to Lake Tuborg.