基于SPEI的中国西南地区1961-2012年干旱变化特征分析

利用1961—2012年中国西南地区86个气象站逐月降水量和平均气温资料,引入一个新的干旱指数——标准化降水蒸散指数(SPEI)作为干旱等级划分指标,研究了1961—2012年该地区不同时间尺度干旱的变化特征。结果表明:该地区12个月尺度干旱频率在云贵交界区呈显著增加趋势,其他区域变化不显著且不一致;少雨期(11—4月)6个月尺度干旱频率在全区显著增加,而在多雨期(5—10月)大部分区域干旱频率呈缓慢减少趋势,减少最明显的区域在四川南部;3个月尺度干旱频率在春季变化不明显,在秋季和冬季显著增加,其中2000—2012年的增加趋势尤为显著,干旱化趋势严重。     

江苏沿海对虾亲虾入室期规律分析及其预报

根据多年的生产试验,分析总结了江苏沿海对虾适宜入室的气象指标的分布特征以及不同地区最早、最适、最迟入室指标出现时间之间的相关性,并以射阳县、南通市为代表建立起预报方程,为江苏沿海做好亲虾入室的气象服务工作提供了理论依据和新的途径。     

盐城地区大棚反季节蔬菜生产的温度条件及其应用

通过平行对比观测试验，分析得出了我市塑料大棚不同层次的增温效应，以及晴雨天气转换时大棚内的各项温度的变化情况，并根据大彬的几种主要蔬菜适宜生长的气象指标，对我市沿海地区大棚的反季节蔬菜生产作出各类蔬菜棚内的适宜生长期，为利用大棚进行反季节蔬菜生产提供了科学依据。     

Integration of optical and Synthetic Aperture Radar (SAR) imagery for delivering operational annual crop inventories

Agriculture plays a critical role within Canada’s economy and, as such, sustainability of this sector is of high importance. Targeting and monitoring programs designed to promote economic and environmental sustainability are a vital component within Canada’s agricultural policy. A hierarchy of land information, including up to date information on cropping practices, is needed to measure the impacts of programs on land use decision-making and to gauge the environmental and economic benefits of these investments. A multi-year, multi-site research activity was completed to develop a robust methodology to inventory crops across Canada’s large and diverse agricultural landscapes. To move towards operational implementation the methodology must deliver accurate crop inventories, with consistency and reliability. In order to meet these operational requirements and to mitigate risk associated with reliance on a single data source, the methodology integrated both optical and Synthetic Aperture Radar (SAR) imagery. The results clearly demonstrated that multi-temporal satellite data can successfully classify crops for a variety of cropping systems present across Canada. Overall accuracies of at least 85% were achieved, and most major crops were also classified to this level of accuracy. Although multi-temporal optical data would be the preferred data source for crop classification, a SAR-optical dataset (two Envisat ASAR images and one optical image) provided acceptable accuracies and will mitigate risk associated with operational implementation. The preferred dual-polarization mode would be VV–VH. Not only were these promising classification results repeated year after year, but the target accuracies were met consistently for multiple sites across Canada, all with varying cropping systems.     

Land surface temperature and its impact factors in Western Sichuan Plateau,China

The understanding influence of multiple factors variations on land surface temperature (LST) remains elusive. LST was retrieved by the atmospheric correction algorithms. Based on the correlation coefficients, stepwise regression analysis was developed to examine how multiple factors variability led to LST variations. The differences in LST between impact factors vary depending on time in a day. The elevation and land use types significantly affect the LST in sunny slope or shadow areas has a significantly quadratic curve correlation or a negative linear correlation with it, the influence of slope and aspect is not very significant. LST for forestland, grassland and bare land in the sunny slope and shadow area was the cubic polynomial related to its elevation. Normalized difference vegetation index (NDVI) and normalized difference moisture index (NDMI) effectively express LST in mountainous. LST and NDMI or NDVI have a significantly negative correlation, NDMI is more effective and more applicable for the expression of LST.     

东南沿海地理国情普查影像解译应用分析

影像解译是地理国情普查过程中一项重要的基础性工作,影像解译的结果直接影响作业质量、效率.本文选择东南沿海地区具有典型特征的影像,结合我省正在开展的地理国情普查实践,分别采用目视解译、自动解译和人机交互解译三种方法进行解译,从解译精度、效率、应用条件等方面,对比分析了三种方法的优缺点,结果表明:三种解译方法各具优势和不足,解译结果与影像质量、辅助数据质量、地形复杂程度、地物种类等有密切关系,在实际地理国情普查过程中须综合考虑使用.     

Study on Sampling Rule and Simplification of LiDAR Point Cloud Based on Terrain Complexity

It is difficult to obtain digital elevation model (DEM) in the mountainous regions. As an emerging technology, Light Detection and Ranging (LiDAR) is an enabling technology. However, the amount of points obtained by LiDAR is huge. When processing LiDAR point cloud, huge data will lead to a rapid decline in data processing speed, so it is necessary to thin LiDAR point cloud. In this paper, a new terrain sampling rule had been built based on the integrated terrain complexity, and then based on the rule a LiDAR point cloud simplification method, which was referred as to TCthin, had been proposed. The TCthin method was evaluated by experiments in which XUthin and Lasthin were selected as the TCthin’s comparative methods. The TCthin’s simplification degree was estimated by the simplification rate value, and the TCthin’s simplification quality was evaluated by Root Mean Square Deviation. The experimental results show that the TCthin method can thin LiDAR point cloud effectively and improve the simplification quality, and at 5 m, 10 m, 30 m scale levels, the TCthin method has a good applicability in the areas with different terrain complexity. This study has theoretical and practical value in sampling theory, thinning LiDAR point cloud, building high-precision DEM and so on.     

Role of reservoir regulation and groundwater feedback in a simulated ground-soil-vegetation continuum: A long-term regional scale analysis

The regional terrestrial water cycle is strongly altered by human activities. Among them, reservoir regulation is a way to spatially and temporally allocate water resources in a basin for multi-purposes. However, it is still not sufficiently understood how reservoir regulation modifies the regional terrestrial- and subsequently, the atmospheric water cycle. To address this question, the representation of reservoir regulation into the terrestrial component of fully coupled regional Earth system models is required. In this study, an existing process-based reservoir network module is implemented into NOAH-HMS, that is, the terrestrial component of an atmospheric–hydrologic modelling system, namely, the WRF-HMS. It allows to quantitatively differentiate role of reservoir regulation and of groundwater feedback in a simulated ground-soil-vegetation continuum. Our study focuses on the Poyang Lake basin, where the largest freshwater lake of China and reservoirs of different sizes are located. As compared to streamflow observations, the newly extended NOAH-HMS slightly improves the streamflow and streamflow duration curves simulation for the Poyang Lake basin for the period 1979–1986. The inclusion of reservoir regulation leads to major changes in the simulated groundwater recharges and evaporation from reservoirs at local scale, but has minor effects on the simulated soil moisture and surface runoff at basin scale. The performed groundwater feedback sensitivity analysis shows that the strength of the groundwater feedback is not altered by the consideration of reservoir regulation. Furthermore, both reservoir regulation and groundwater feedback modify the partitioning of the simulated evapotranspiration, thus affecting the atmospheric water cycle in the Poyang Lake region. This finding motivates future research with our extended fully coupled atmospheric–hydrologic modelling system by the community.     

A non-linear regularized constrained impedance inversion

Inversion for seismic impedance is an inherently complicated problem. It is ill‐posed and band‐limited. Thus the inversion results are non‐unique and the process is unstable. Combining regularization with constraints using sonic and density log data can help to reduce these problems. To achieve this, we developed an inversion method by constructing a new objective function, including edge‐preserving regularization and a soft constraint based on a Markov random field. The method includes the selection of proper initial values of the regularization parameters by a statistical method, and it adaptively adjusts the regularization parameters by the maximum likelihood method in a fast simulated‐annealing procedure to improve the inversion result and the convergence speed. Moreover, the method uses two kinds of regularization parameter: a ‘weighting factor’λ and a ‘scaling parameter’δ. We tested the method on both synthetic and field data examples. Tests on 2D synthetic data indicate that the inversion results, especially the aspects of the discontinuity, are significantly different for different regularization functions. The initial values of the regularization parameters are either too large or too small to avoid either an unstable or an over‐smoothed result, and they affect the convergence speed. When selecting the initial values of λ, the type of the regularization function should be considered. The results obtained by constant regularization parameters are smoother than those obtained by adaptively adjusting the regularization parameters. The inversion results of the field data provide more detailed information about the layers, and they match the impedance curves calculated from the well logs at the three wells, over most portions of the curves.     

Characteristics and method of synthesis seismic wave based on wavelet reconstruction

A novel method of synthesizing seismic wave using wavelet reconstruction is proposed and compared with the traditional method of using theory of Fourier transform. By adjusting the frequency band energy and taking it as criterion, the formula of synthesizing seismic wave is deduced. Using the design parameters specified in Chinese Seismic Design Code for buildings, seismic waves are synthesized. Moreover, the method of selecting wavelet bases in synthesizing seismic wave and the influence of the damping ratio on synthesizing results are analyzed. The results show that the synthesis seismic waves using wavelet bases can represent the characteristics of the seismic wave as well as the ground characteristic period, and have good time-frequency non-stationary.