Evaluation of Subsurface Lithologic Units for Groundwater Exploration in the Barind Tract of Bangladesh

Barind Tract, located north western part of Bangladesh, is one of the most diversified physiographic units of the country. The surface water supply in this part is particularly limited, so the irrigation is almost entirely depends on groundwater. However, over exploitation indicates falling groundwater heads in this area. The objective of present study is to examine the nature of the aquifer system Barind Tract of Bangladesh in order to assess the sustainability of groundwater yield. Borehole lithology data were collected, processed and analyzed for this purpose. Representative panel diagram, 3-D stratigraphic and cross-sectional views were also prepared for necessary assessment of the variation of individual subsurface stratum in different locations. The study identified three subsurface geologic formations namely, a top clay layer, sand layer of different grain size and at the bottom an impermeable clay zone. Maps of formation thickness and index revealed that aquifer thickness is low in the north-western corner and in some places of middle of south-western corner. The thickness of sand formation in other places is recorded above 20 m. It is expect that the finding of the study will help groundwater resources development, planning and management in the area.     

Interior boundary-aligned unstructured grid generation and cell-centered versus vertex-centered CVD-MPFA performance

Grid generation for reservoir simulation must honor classical key constraints and be boundary aligned such that control-volume boundaries are aligned with geological features such as layers, shale barriers, fractures, faults, pinch-outs, and multilateral wells. An unstructured grid generation procedure is proposed that automates control-volume and/or control point boundary alignment and yields a PEBI-mesh both with respect to primal and dual (essentially PEBI) cells. In order to honor geological features in the primal configuration, we introduce the idea of protection circles, and to generate a dual-cell feature based grid, we construct halos around key geological features. The grids generated are employed to study comparative performance of cell-centred versus cell-vertex control-volume distributed multi-point flux approximation (CVD-MPFA) finite-volume formulations using equivalent degrees of freedom. The formulation of CVD-MPFA schemes in cell-centred and cell-vertex modes is analogous and requires switching control volume from primal to dual or vice versa together with appropriate data structures and boundary conditions. The relative benefits of both types of approximation, i.e., cell-centred versus vertex-centred, are made clear in terms of flow resolution and degrees of freedom required.     

Structure and stratigraphy of Rumbli and Panjar areas of Kashmir and Pakistan with the aid of GIS

The project area lies in the southern part of the Hazara Kashmir syntaxis. The Hazara Kashmir syntaxis is an antiformal structure. The project area includes Rumbli, Namb, Chatrora, Chachan, Panjar, Barathian and Utrinna areas of Rawalpindi and Sudhnoti districts. The southeastern limb of the Hazara Kashmir syntaxis is imbricated along Punjal thrust, Main Boundary thrust and Riasi fault. The Jhelum fault truncates the western limb of Hazara Kashmir syntaxis. The core of syntaxis comprises of Himalayan molasse deposits. These molasse deposits represent the part of cover sequence of Indian plate. These Himalayan molasse deposits include the Early to Middle Miocene Kamlial Formation, Middle to Late Miocene Chinji Formation, Late Miocene Nagri Formation and Late Miocene Dhok Pathan Formation. The area is highly deformed resulting folds and faults. The major folds in the project area are the Panjar anticline, Barathian syncline, Barathian anticline, Rumbli anticline, Chatrora antiformal syncline and Namb syncline. The folds are either northwest-southeast trending or southwestnortheast trending. The folds are asymmetric, open, and gentle and close in nature. The folds are southwest, northeast or southeast vergent. The Jhelum fault truncates the northeast and northwest trending structures. The folds and faults are the result of northeastsouthwest or northwest-southeast Himalayan compression.     

Dewatering Behaviour of a Uranium Ore Slurry Containing Clays

The main objective of this paper was to investigate the dewatering behaviour of a clayey uranium ore slurry. The slurry (containing 28% clay size) exhibited moderate water adsorption (w _l  = 83% and w _p  = 30%). Primarily composed of muscovite (46%) and quartz (30%), the clay minerals included illite (8%), chlorite (5%) and kaolinite (2%) alongside a CEC of 41 (cmol(+)/kg) with Ca²⁺ and Mg²⁺ as the dominant cations. Likewise, the high EC (17,600 μS/cm) and ionic strength (1.15 mol/L) indicated a flocculated microstructure due to the presence of SO₄ ^2? (22,600 mg/L) and Mg²⁺ (1340 mg/L) in the slurry water. Settling included sedimentation and consolidation at low initial solids condition (25–35%) whereas only consolidation was observed at high initial solids contents (40–50%). The average k reduced from 1.2 × 10^?6 m/s (initial s = 25%) to 5.3 × 10^?8 m/s (initial s = 50%) along with a void ratio reduction from 7.4 to 2.6. Due to thixotropic strength, volume compressibility during consolidation showed apparent pre-consolidation at low effective stress (0.3–2 kPa) with a reduction in void ratio from 2.6 to 2.5. The e _s was found to be 2.46 at σ′ = 2 kPa and was followed by a steeper slope with the void ratio reducing to 2.1 at σ′ = 31 kPa. Likewise, the hydraulic conductivity during consolidation decreased from 2.6 × 10^?9 m/s (at e = 2.6) to 2.0 × 10^?10 m/s (at e = 2.1).     

Solar shield: forecasting and mitigating space weather effects on high-voltage power transmission systems

In this paper, central elements of the Solar Shield project, launched to design and establish an experimental system capable of forecasting the space weather effects on high-voltage power transmission system, are described. It will be shown how Sun–Earth system data and models hosted at the Community Coordinated Modeling Center (CCMC) are used to generate two-level magnetohydrodynamics-based forecasts providing 1–2 day and 30–60 min lead-times. The Electric Power Research Institute (EPRI) represents the end-user, the power transmission industry, in the project. EPRI integrates the forecast products to an online display tool providing information about space weather conditions to the member power utilities. EPRI also evaluates the economic impacts of severe storms on power transmission systems. The economic analysis will quantify the economic value of the generated forecasting system. The first version of the two-level forecasting system is currently running in real-time at CCMC. An initial analysis of the system’s capabilities has been completed, and further analysis is being carried out to optimize the performance of the system. Although the initial results are encouraging, definite conclusions about system’s performance can be given only after more extensive analysis, and implementation of an automatic evaluation process using forecasted and observed geomagnetically induced currents from different nodes of the North American power transmission system. The final output of the Solar Shield will be a recommendation for an optimal forecasting system that may be transitioned into space weather operations.     

Effects of convective available potential energy,temperature and humidity on the variability of thunderstorm frequency over Bangladesh

Theoretical and Applied Climatology - The present study examines the effects of convective available potential energy (CAPE), temperature and humidity on the spatiotemporal variation of...     

Bias correction method of high-resolution satellite-based precipitation product for Peninsular Malaysia

Theoretical and Applied Climatology - Satellite-based precipitation (SBP) is emerging as a reliable source for high-resolution rainfall estimates over the globe. However, uncertainty in SBP is...     

巴基斯坦卡拉奇─海得拉巴区域地震危险性预测

本文讨论了巴基斯坦的地震构造，潜在震源和历史与现代地震活动性，并在此基础上使用确定性和概率性两种方法计算了各发震断层５０年内最大可能的地震在卡拉奇和海得拉巴两城市将引起的地面峰值加速度以及５０年内超越概率为１４％的等加速度区划图。     

Spatial and temporal characteristics of droughts in the western part of Bangladesh

Spatial and temporal characteristics of droughts in the western part of Bangladesh have been analysed. Standardized precipitation index method is used to compute the severity of droughts from the rainfall data recorded in 12 rainfall gauge stations for the period of 1961–1999. An artificial neural network is used to estimate missing rainfall data. Geographic Information System (GIS) is used to map the spatial extent of droughts of different severities in multiple time scales. Critical analysis of rainfall is also carried to find the minimum monsoon and dry months rainfall require in different parts of the study area to avoid rainfall deficit. The study shows that the north and north‐western parts of Bangladesh are most vulnerable to droughts. A significant negative relationship between multiple ENSO index and rainfall is observed in some stations. Analysis of seasonal rainfall distribution, rainfall reliability and long‐term rainfall trend is also conducted to aid prediction of future droughts in the area. Copyright © 2007 John Wiley & Sons, Ltd.     

巴基斯坦北Potwar形变区地震的震源机制研究

巴基斯坦北Potwar形变区是西北喜马拉雅褶皱逆冲带前陆区的一部分，绘制了该区的地震活动性图. 与相邻地区比较，该区地震并不活跃，没有显示出与地表地质构造相关的清晰地震活动图象. 做出了4次地震的震源机制解. 结果表明，有3次地震是左旋走滑断层活动，另一次地震是逆断层活动. 地震震源机制解的P轴方向为NW-SE和NE-SW. 现今的构造形变很可能也包括基底的形变.