Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

Reflectance spectroscopy and remote sensing data for finding sulfide-bearing alteration zones and mapping geology in Gilgit-Baltistan,Pakistan

Gilgit-Baltistan region is covering the northern most part of Pakistan where the rocks of the Kohistan-Ladakh island arc and Karakoram plate are exposed. The area has greater potential for precious and base metals deposits which are needed to be explored through spectroscopy and remote sensing techniques. Minerals and rocks can nowadays be identified through the measurement of their absorption and reflectance features by spectroscopic analysis. Spectral reflectance analysis is also very important in selecting the appropriate spectral bands for remote-sensing data analysis of unknown or inaccessible areas. In this study, reflectance spectra in the spectral range of 0.35–2.5 μm of different types of unaltered and altered rocks found in the Machulu and Astor areas of northern Pakistan were obtained using an ASD spectroradiometer. The fresh rock samples showed low spectral reflectance as compared to the altered rock samples. The minerals jarosite, goethite, and hematite showed depth of absorption minima in the range of 0.4–1.15 μm due to the presence of iron (Fe), while jarosite and limonite showed absorption depth at 2.2 μm due to the presence of hydroxyl ions (OH^¯). The clay minerals montmorillonite and illite showed absorption depth at 1.93 and 2.1 μm, respectively. Muscovite showed depth of absorption minima at 1.4 and 1.9 μm in some samples. Calcite showed deep absorption minima at 2.32 μm, while anorthite showed absorption features at 1.4, 1.9, 2.24, and 2.33 μm. Olivine showed a slight depressed absorption feature at 1.07 μm. The copper-bearing phases malachite, chrysocolla, and azurite showed, respectively, a broad absorption feature in the range of 0.6–0.9 μm, a small absorption at 1.4 μm, and a deep absorption at 1.93 μm. The unmineralized samples exhibited high reflectance in the wavelength ranges of 0.6–0.8, 1.6–1.9, 2.0–2.3, 2.1–2.25, and 2.4–2.5 μm, respectively, while the mineralized samples showed reflectance bands in the wavelength ranges of 0.4–0.6, 1.3–1.8, and 2.1–2.2 μm. On this basis, the band ratio combinations 7/5–4/3–6/3 and 7/5–6/3–4/3 of Landsat 8 and 4/7–4/3–2/1 for ASTER data were found to be very effective in the lithological differentiation of major rock units.     

Geochemical modeling,fate distribution,and risk exposure of potentially toxic metals in the surface sediment of the Shyok suture zone,northern Pakistan

The objective of the current study was to assess the contamination of potentially toxic metals (PTMs) in weathered surface sediment, along stream tributaries, and surrounding area of the river Chitral, Shyok suture zone district Chitral, Pakistan. To understand the geochemical features of 113 sediment, samples were collected from the Mirkhani and Drosh area. Then, different statistical tools including the geo-accumulation index (Igeo), cluster analysis (CA), principal component analysis (PCA), and ecological risk assessment (ERA) were used to unravel the origin, intensity, and exposure level of PTMs to control risk and restore the ecosystem within the study area. The results for the PTMs namely nickle (Ni), chromium (Cr), copper (Cu), cadmium (Cd), lead (Pb), zinc (Zn), and cobalt (Co) in Mirkhani and Drosh were in the following ranges: 10–150, 15–210, 15–250, 0.08–1.00, 10–70, 76–240 and 14–51; and 13–240, 17–210, 15–150, 0.08–0.60, 7–140, 47–150 and 13–36 mg/kg, respectively. In consequence, the potential ecological risk caused by Pb, Ni, Cu, Co, Cr, and Zn is reflected by the percentages of samples with an ecological risk index (ERI) greater than one which were 100%, 91%, 100%, 100%, 92%, and 100%, respectively. However, the overall mean decreasing order of ecological risk of PTMs in the district Chitral was Pb > Ni > Cu > Co > Cr > Zn > Cd. Moreover, the PCA yielded 78% variability which indicated that mineral prospects play an important role in the contamination of sediment. Furthermore, the mineral phases of Pb and Zn suggested supersaturation, while that for Cd revealed unsaturation. The results of Igeo, ERI, and CA indicated contamination of PTMs in the study area. The ERI value of Pb, Ni, Cu, Co, Cr, and Zn was higher than 1 suggesting an ecological risk in the study area. Moreover, the current study showed the dominance of geogenic contamination with major contributions from ultramafic rock and known mineral prospects. Therefore, contaminated sediment of the Shyok suture zone is extremely detrimental to the aquatic ecosystem of the study area.     

A study of Brans-Dicke theory in FRW-model

In FRW space time Brans-Dicke theory is developed for two cases: (i) the vacuum and (ii) the perfect fluid model. The field equations are transformed into a much simpler form under a change of time co-ordinates and then the solutions are determined for the above cases. An equation of statep =/3 (radiation) is assumed in the case of perfect fluid.     

World shipping: a time for redefinition?

How often when somebody in desperation appeals for redefining worn issues, wiser men reach for their hats? Nevertheless, I believe the present is just such a time for clearer enunciation of concepts in international shipping policy. I find many publicists increasingly, often unconsciously, fail to use common terms correctly in historical context when discussing the disarray in which marine affairs finds itself today; and unless we discipline ourselves to do so, neither we nor our audiences will secure that initial firm grasp of the facts that is so essential to properly understanding the current problems which beset maritime commerce.     

Geochemistry and origin of Mn-deposits in the Waziristan ophiolite complex, north Waziristan, Pakistan

The Waziristan ophiolite complex is located along the western margin of the Indian plate in northwestern Pakistan. The Mn-deposits in the Saidgi and Shuidar areas are part of this ophiolite complex. These deposits, both banded and massive in nature, are hosted by metachert and are generally overlying metavolcanics. Braunite and cryptocrystalline quartz are the main constituents of the manganese ores in both areas. Hematite occurs in the Shuidar deposits as a minor phase. Metacherts are microcrystalline aggregates of microcrystalline quartz, chalcedony, and lesser hematite. Chemically, the studied Mn-deposits and associated metacherts are very similar to those formed by submarine hydrothermal effusive processes. The deposits originated along sea-floor spreading centers (mid-ocean ridges) within the Neo-Tethys Ocean and were later obducted as part of the Waziristan ophiolite complex. Received: 9 January 1998 / Accepted: 10 March 1999     

Role of Quaternary stratigraphy on arsenic-contaminated groundwater from parts of Barak Valley, Assam, North–East India

Groundwater arsenic survey in Cachar and Karimganj districts of Barak Valley, Assam shows that people in these two districts are drinking arsenic-contaminated (max. 350 μg/l) groundwater. 66% of tubewells in these two districts have arsenic concentration above the WHO guideline value of 10 μg/l and 26% tubewells have arsenic above 50 μg/l, the Indian standards for arsenic in drinking water. 90% of installed tubewells in these two districts are shallow depth (14–40 m). Shallow tubewells were installed in Holocene Newer Alluvium aquifers are characterised by grey to black coloured fine grained organic rich argillaceous sediments and are mostly arsenic contamination in groundwater. Plio-Pleistocene Older Alluvium aquifers composed of shale, ferruginous sandstone, mottle clay, pebble and boulder beds, which at higher location or with thin cover of Newer Alluvium sediments are safe in arsenic contamination in groundwater. 91% of tubewell water samples show significantly higher concentrations of iron beyond its permissible limit of 1 mg/l. The iron content in these two districts varies from 0.5 to as much as 48 mg/l. Most of the arsenic contaminated villages of Cachar and Karimganj districts are located in entrenched channels and flood plains of Newer Alluvium sediments in Barak-Surma-Langai Rivers system. However, deeper tubewells (>60 m) in Plio-Pleistocene Older Alluvium aquifers would be a better option for arsenic-safe groundwater. The arsenic in groundwater is getting released from associated Holocene sediments which were likely deposited from the surrounding Tertiary Barail hill range.