A lacustrine GDGT-temperature calibration from the Scandinavian Arctic to Antarctic: Renewed potential for the application of GDGT-paleothermometry in lakes

Quantitative climate reconstructions are fundamental to understand long-term trends in natural climate variability and to test climate models used to predict future climate change. Recent advances in molecular geochemistry have led to calibrations using glycerol dialkyl glycerol tetraethers (GDGTs), a group of temperature-sensitive membrane lipids found in Archaea and bacteria. GDGTs have been used to construct temperature indices for oceans (TEX₈₆ index) and soils (MBT/CBT index). The aim of this study is to examine GDGT-temperature relationships and assess the potential of constructing a GDGT-based palaeo-thermometer for lakes. We examine GDGT-temperature relationships using core top sediments from 90 lakes across a north-south transect from the Scandinavian Arctic to Antarctica including sites from Finland, Sweden, Siberia, the UK, Austria, Turkey, Ethiopia, Uganda, Chile, South Georgia and the Antarctic Peninsula. We examine a suite of 15 GDGTs, including compounds used in the TEX₈₆ and MBT/CBT indices and reflecting the broad range of GDGT inputs to small lake systems.GDGTs are present in varying proportions in all lakes examined. The TEX₈₆ index is not applicable to our sites because of the large relative proportions of soil derived and methanogenic components. Similarly, the MBT/CBT index is also not applicable and predicts temperatures considerably lower than those measured. We examine relationships between individual GDGT compounds and temperature, pH, conductivity and water depth. Temperature accounts for a large and statistically independent fraction of variation in branched GDGT composition. We propose a GDGT-temperature regression model with high accuracy and precision (R² = 0.88; RMSE = 2.0 °C; RMSEP = 2.1 °C) for use in lakes based on a subset of branched GDGT compounds and highlight the potential of this new method for reconstructing past temperatures using lake sediments.     

Rainfall-induced landslide event of May 2010 in the eastern part of the Czech Republic

More than 150 landslides originated in the eastern part of the Czech Republic (region of the Flysch Outer Western Carpathians—hereinafter, OWC) due to soil saturation caused by antecedent precipitation and long lasting and intensive rainfalls on 16–18 May 2010 (>300 mm as measured by some stations). As a consequence, a multitude of small failures originated 88% of which was smaller than 10⁴ m². Most landslides are characterised as shallow (<10 m) or middle–deep (10–30 m) incipient (rather short travel) landslides, debris slides and soil slips spatially clustered to a geological domain underlain by rather weak thin-bedded flysch and unconsolidated Quaternary deposits. An exception to this is represented by a kilometre-long rockslide (∼2–3 mil m³) affecting tectonically weakened and weathered claystone/mudstone-dominated flysch on the southern slope of Mt. Girová (the Beskydy Mountains). The rockslide is one of the largest long runout landslides in the territory of the Czech Republic activated over the past few decades as it reaches the dimensions of the largest documented Holocene long runout landslides in the Czech part of the OWC. A majority of the May 2010 landslide events developed inside older (Holocene or historic) landslide terrains, which points to their spatial persistency and recurrent nature. In spite of the fact that the May 2010 landslide event was not as destructive as some previous landslide activisation in the OWC region (e.g. July 1997 event), it left many slope failures at the initial stage of their potential future reactivation.     

Geochemistry and mineralogy of Platinum-group elements in the Ransko gabbro–peridotite massif,Bohemian Massif (Czech Republic)

The Ransko gabbro-peridotite massif in Eastern Bohemia is a strongly differentiated intrusive complex of Lower Cambrian age. The complex hosts low grade Ni-Cu ores mainly developed close to the contact of olivine-rich rocks with gabbros, in troctolites and, to a much lesser extent, in both pyroxene and olivine gabbros and plagioclase-rich peridotites. The ore zone is characterized by strong serpentinization and uralitization. The total Ni + Cu locally reaches up to 4 wt%. Anomalous concentrations of platinum-group elements (PGE's) (maximum 532 ppb Pd, 182 ppb Pt, 53 ppb Rh, 15 ppb Ru, 41 ppb Ir) were detected in samples of Cu-Ni and Ni-Cu ores (maximum 2.63 wt% Ni and 2.31 wt% Cu) from the Jezírka orebody. The main ore paragenesis includes pyrrhotite, pentlandite, chalcopyrite, cubanite, pyrite, magnetite, mackinawite, valleriite, ilmenite and sphalerite. During this work, michenerite, froodite, sperrylite, gold, native bismuth, altaite, tsumoite, hessite, an unnamed Bi-Ni telluride, cobaltite-gersdorffite and galena were newly identified. The host rocks originated through partial melting of a slightly depleted mantle source with noble metals scavenged from this primitive magma prior to the development of these rocks.     

A Simple Analytical Formula for the Leakage Flux Through a Perforated Aquitard

In this methods note, we present a simple analytical formula to quantify the steady‐state leakage flux (Q) over a perforated aquitard. The flux depends on the aquitard thickness (D), the radius of the perforation (R), the hydraulic conductivity of the material inside the perforation (k_fill), the conductivities of the overlying and underlying aquifers (k₁ and k₂, respectively), and the head difference between the two aquifers (ΔH): This equation assumes an aquitard separating two homogeneous and infinite aquifers (R ? aquifer thickness) in which radial flow to and from the perforation occurs, with no other recharge or discharge boundaries near the perforation. The flux through a perforation in a hypothetical case study with D = 10 m, k₁ = 10 m/d, k₂ = 20 m/d, R = 0.072 m, and ΔH = 1 m ranges between less than 1 mL/d if the hole is backfilled with bentonite (k_fill = 10^?4 m/d), to several liters per day if the perforation is backfilled with sand from the overlying aquifer (k_fill = 10 m/d), to several m³/d if the perforation forms an open conduit (k_fill = 10⁵ m/d). The leakage fluxes calculated with this model agree well with those calculated using a numerical model (MODFLOW).     

Data reporting norms for 40Ar/39Ar geochronology

Data reported in ⁴⁰Ar/³⁹Ar geochronology studies are commonly insufficient to allow computation of ages. This deficiency renders it difficult to compare ages based on different standards or constants, and often hinders critical evaluation of the results. Herein are presented an enumeration of the data that should be reported in all ⁴⁰Ar/³⁹Ar studies, including a discussion in support of these requirements. The minimum required data are identified and distinguished from parameters that are useful but may be derived from them by calculation. Finally, recommendations are made for metadata needed to document age calculations (e.g., from age spectrum or isochron analyses).     

An ecohydrological approach to predicting regional woody species distribution patterns in dryland ecosystems

This paper presents a quantitative ecohydrological framework for predicting regional distribution patterns of woody species in dryland ecosystems. The framework is based on an existing stochastic model for the daily mass balance of water that represents the interactions between soils, climate, and vegetation. Individual species selection is based on an optimality trade-off hypothesis, which states that dryland vegetation patterns are constrained by maximization of water use and simultaneous minimization of water stress. The relative importance of water use and stress avoidance to the overall fitness of three Acacia species is determined from the heterogeneous basin, the Upper Ewaso Ng’iro river basin, of the central Kenya highlands. The model results indicate that overall fitness is more strongly influenced by water use than stress avoidance but that consideration of both stress avoidance and water use is critical to predicting basin-scale patterns of species distribution. We identify a linear trend in the frequency and intensity of storms with the same annual total using a basin-wide gauge precipitation dataset. After calibration, we apply the basin average linear trends in time for average rain per storm and storm arrival rates. The model results indicate the upslope migration of two species, Acacia tortilis and Acacia xanthophloea to areas with higher total rainfall. Lastly, we explore the modeled changes of species cover in the basin influenced by changes in rainfall total holding growing season rainfall variability constant and changes in growing season rainfall variability holding total rainfall constant. We find that changes in dryland species distribution patterns and relative abundance may be as sensitive to growing season rainfall variability as they are to changes in total rainfall amounts.     

Geophysical constraints on deep weathering and water storage potential in the Southern Sierra Critical Zone Observatory

The conversion of bedrock to regolith marks the inception of critical zone processes, but the factors that regulate it remain poorly understood. Although the thickness and degree of weathering of regolith are widely thought to be important regulators of the development of regolith and its water‐storage potential, the functional relationships between regolith properties and the processes that generate it remain poorly documented. This is due in part to the fact that regolith is difficult to characterize by direct observations over the broad scales needed for process‐based understanding of the critical zone. Here we use seismic refraction and resistivity imaging techniques to estimate variations in regolith thickness and porosity across a forested slope and swampy meadow in the Southern Sierra Critical Zone Observatory (SSCZO). Inferred seismic velocities and electrical resistivities image a weathering zone ranging in thickness from 10 to 35 m (average = 23 m) along one intensively studied transect. The inferred weathering zone consists of roughly equal thicknesses of saprolite (P‐velocity < 2 km s^?1) and moderately weathered bedrock (P‐velocity = 2–4 km s^?1). A minimum‐porosity model assuming dry pore space shows porosities as high as 50% near the surface, decreasing to near zero at the base of weathered rock. Physical properties of saprolite samples from hand augering and push cores are consistent with our rock physics model when variations in pore saturation are taken into account. Our results indicate that saprolite is a crucial reservoir of water, potentially storing an average of 3 m³ m^?2 of water along a forested slope in the headwaters of the SSCZO. When coupled with published erosion rates from cosmogenic nuclides, our geophysical estimates of weathering zone thickness imply regolith residence times on the order of 10⁵ years. Thus, soils at the surface today may integrate weathering over glacial–interglacial fluctuations in climate. Copyright © 2013 John Wiley & Sons, Ltd.     

Type IV dm bursts: Onset and sudden reductions

The effect of collisions of suprathermal electrons with a thermal background plasma is investigated and is shown to cause flattening of a monotonically descending velocity distribution of fast particles. As a result flare-produced energetic electrons that are trapped in a coronal magnetic arch and that are initially distributed in energy according to a power-law, can give rise to an instability of Langmuir waves in the background plasma and the subsequent emission of continuum radiation as observed in type IV dm bursts.To explain the appearance of sudden reductions observed in type IV dm outbursts the effects both of magnetic compressions of the source region and of renewed injections of fast particles on the continuum source are investigated. It is found that the latter process can explain the observed reductions.     

Acidities of confined water in interlayer space of clay minerals

The acid chemistry of confined waters in smectite interlayers have been investigated with first principles molecular dynamics (FPMD) simulations. Aiming at a systematic picture, we establish the model systems to take account of the three possible controlling factors: layer charge densities (0 e, 0.5 e and 1.0 e per cell), layer charge locations (tetrahedral and octahedral) and interlayer counterions (Na⁺ and Mg²⁺). For all models, the interlayer structures are characterized in detail. Na⁺ and Mg²⁺ show significantly different hydration characteristics: Mg²⁺ forms a rigid octahedral hydration shell and resides around the midplane, whereas Na⁺ binds to a basal oxygen atom and forms a very flexible hydration shell, which consists of five waters on average and shows very fast water exchanges. The method of constraint is employed to enforce the water dissociation reactions and the thermodynamic integration approach is used to derive the free-energy values and the acidity constants. Based on the simulations, the following points have been gained. (1) The layer charge is found to be the direct origin of water acidity enhancement in smectites because the neutral pore almost does not have influences on water dissociations but all charged pores do. (2) With a moderate charge density of 0.5 e per cell, the interlayer water shows a pKa value around 11.5. While increasing layer charge density to 1.0 e, no obvious difference is found for the free water molecules. Since 1.0 e is at the upper limit of smectites’ layer charge, it is proposed that the calculated acidity of free water in octahedrally substituted Mg²⁺-smectite, 11.3, can be taken as the lower limit of acidities of free waters. (3) In octahedrally and tetrahedrally substituted models, the bound waters of Mg²⁺ show very low pKa values: 10.1 vs 10.4. This evidences that smectites can also promote the dissociations of the coordinated waters of metal cations. The comparison between the two Mg²⁺-smectites reveals that different layer charge locations do not lead to obvious differences for bound and free water acidities.