Support vector machines and feed-forward neural networks for spatial modeling of groundwater qualitative parameters

The present study attempts to model the spatial variability of three groundwater qualitative parameters in Guilan Province, northern Iran, using artificial neural networks (ANNs) and support vector machines (SVMs). Data collected from 140 observation wells for the years 2002–2014 were used. Five variables, X and Y coordinates of the observation well, distance of the observation well from the shoreline, areal average 6-month rainfall depth, and groundwater level at the day of water quality sampling, were considered as primary input variables. In addition, nine qualitative variables were also considered as auxiliary input variables. Electrical conductivity (EC), sodium concentration (Na⁺), and sulfate concentration (SO₄ ^2?) of the groundwater in the region were estimated using ANNs and SVMs with different input combinations. The results showed that both ANNs and SVMs work well when the only primary input variable is the well location. The ANN yielded an RMSE of 1.03 mEq/l for SO₄ ^2?, 1.05 mEq/l for Na⁺, and 203.17 μS/cm for EC, using the X and Y coordinates of the observation wells in the study area. In the case of SVM, these values were, respectively, 0.87, 0.87, and 176.68. Considering the auxiliary input variables (pH, EC, and the concentrations of Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl^?, SO₄ ^2?, and HCO₃ ^?) resulted in a significant decrease in the RMSE of both ANNs (0.22, 0.30, and 33.04) and SVMs (0.26, 0.34, and 36.23). Comparing these RMSE values with those of cokriging interpolation technique (0.59, 0.98, and 177.59) indicated that ANNs and SVMs produced more accurate estimates of the three qualitative parameters. The relative importance of auxiliary input variables was also determined using Gamma test. The output uncertainty of ANNs and SVMs were determined using p-factor and d-factor. The results showed that SVMs have less uncertainty than ANNs.     

Spatially-Weighted Factor Analysis for Extraction of Source-Oriented Mineralization Feature in 3D Coordinates of Surface Geochemical Signal

Natural Resources Research - This contribution proposes a spatially weighted factor analysis (SWFA) to recognize effectively the underlying mineralization-related feature(s) in geochemical signals....     

The Effects of Hydrophilic Polymer and Soil Salinity on Corn Growth in Sandy and Loamy Soils

The interaction effects of different applied ratios of a hydrophilic polymer (Superab A200) (0, 0.2, 0.6% w/w) under various soil salinity levels (initial salinity, 4 and 8 ms/cm) were evaluated on available water content (AWC), biomass, and water use efficiency for corn grown in loamy sand and sandy clay loam soils. The results showed that the highest AWC was measured at the lowest soil salinity. The application of 0.6% w/w of the polymer at the lowest salinity level increased the AWC by 2.2 and 1.2 times greater than those of control in the loamy sand and sandy clay loam soils, respectively. The analysis of variance of data showed that the effect of salinity was significant on biomass and water use efficiency of corn in the loamy sand and sandy clay loam soils. The highest amounts of these traits were measured in soils with the lowest salinity level. Application of polymer at the rate of 0.6% in the loamy sand soil and at the rate of 0.2% in the sandy clay loam soil resulted in the highest aerial and root biomass and water use efficiency for corn. At these polymer rates the amounts of water use efficiency for corn were 2.6 and 1.7 times greater than those of control in the loamy sand and sandy clay loam soils, respectively. Thus, the use of hydrophilic polymer in soils especially in the sandy soils increases soil water holding capacity, yield, and water use efficiency of plant. On the other hand, decreases the negative effect of soil salinity on plant and helps for irrigation projects to succeed in arid and semi‐arid areas.     

Synoptic and remote sensing analysis of dust events in southwestern Iran

Southwest regions of Iran, due to dry environmental and climatic conditions, have been identified as one of the five major regions in the world. In recent years, large parts of Iran have been affected by suspended particles from the dust storms. The studied area is located in foothills of the Zagros Mountain Range just north of Persian Gulf in southwest of Iran. Dust and other meteorological data were prepared in 3-hour intervals from 12 synoptic weather stations. For tracking dust storms, satellite images of MODIS were used. Atmospheric conditions during the occurrence of dust storms were determined using NCEP reanalysis data. According to the statistical calculations, most storms occurred in the spring and summer. The lowest number of dust events occurred in the fall and winter particularly in December and January, when there are high possibilities of rainfall occurrence and dynamical instability conditions in the north and west of the region. The results illustrated that the highest amounts of hourly dust occurred in the afternoon and the lowest amounts occurred at 00UTC (3.30 am local times). It seems that it is closely related to the heating surface and the occurrence of local dry instabilities. Analyses of data showed that dust amounts (or volumes) in all the stations have two climactic peaks, first between 1982 and 1990 and second between 2005 and 2008 periods. These peaks can be related to a variety of factors including anthropogenic factors such as war, agricultural activities, dam construction, and widespread droughts.     

Probabilistic Analysis of Ground Surface Vibration Due to Train Movement, a Case Study on Tehran Metro Line 4

Ground surface vibration produced by moving train is one of the most important aspects in urban areas. The purpose of this study is the probabilistic analysis of ground surface vibration, which is generated by metro transportations. For this reason, Tehran metro line 4 is considered as a case study. In this paper, at first, a new procedure is used to simulate train dynamic load. In the second step, based on the variation of geomechanical properties and train characteristics in Tehran metro line 4, more than 60 numerical models are simulated. The results of numerical simulations are analyzed by multivariate statistical technique and an equation for prediction of peak particle velocity (PPV) in the ground surface is presented. In the next step, probabilistic analysis is done using Monte Carlo Simulation (MCS). Finally, sensitivity of input data on ground surface vibration is discussed and the impact of geomechanical properties and train characteristics on the surface vibration is considered. Based on the probabilistic analysis, PPV in the surface region of Tehran metro line 4 is <2.76?mm/s with 95?% probability.     

Geodynamic setting and emplacement of mylonitic granitoids within the North Golpayegan shear zone,Iran

The metamorphic complex of the North Golpayegan is part of the Sanandaj-Sirjan Zone. There are at least three distinct stages of deformation in this complex. Throughout the first stage, Paleozoic and Mesozoic sedimentary rocks have experienced regional metamorphism during Late Jurassic tectonic events related to the subduction of the Neo-Tethys oceanic lithosphere under the Iranian microcontinent. During the second deformation stage in the Late Cretaceous-Paleocene, the rocks have been mylonitized. The third stage of deformation in the region has led to folding and faulting superimposed on previous structures, and to exhumation of the metamorphic complex. This stage has determined the current morphology and N70E strike of the complex. The mylonitic zones of the second stage of deformation have been formed along the dextral transpressional faults. During the third stage of deformation and exhumation of the metamorphic complex, the mylonitic zones have been uplifted to the surface. The granitoids in the metamorphic complex have been injected along the extensional shear fractures related to the dextral transpressional displacements. The granitoids have been transformed into mylonites within the synthetic or antithetic shear zones. These granitoids are recognized as syncollision type (CCG) and have been formed at the end of orogenic events synchronous to the collision between the Arabian and the Iranian plates at the Late Cretaceous-Paleocene.     

Investigation of NDVI in relation to the growth phases of beech leaves in forest

The main objective of the science of phenology is to identify the time of the occurrence of conspicuous periodic phenomena in plants under the impact of climatic factors. The study of phonologic phenomena through visual observations and terrestrial studies and temperature registration using a thermo hydrometer in different altitudinal levels and using the satellite data of IRS1C/1D LISSIII in twelve 1-ha plots in pure beech stands in the altitudinal range of 500 to 1,200 m above the sea level from April to December was carried out in such a way that for each month, one image of sensor was allocated. The produced vegetation indices were matched with terrestrial observations of the phenology periods in each month in the beech plots. The results show that the increase of the altitude above the sea level functions like latitude and its most remarkable impact is the decreasing of the temperature and the shortening of growing season. The terrestrial observations carried out in the plots show that a sudden increase in the temperature leads to the faster growth and emergence of the leaves. The produced correlation coefficient between the temperature and the emergence of the leaves was (p?=?0.01) r?=?0.87. Moreover, the end of fall in the studied region has a direct and significant relation with temperature. The amount of correlation coefficient between the temperature and end of fall in the studied region is equal to (p?=?0.01) r?=?0.91. Normalized difference vegetation index (NDVI) is more related to the growth and nurturing of the leaves. The amount of NDVI during the growth of the leaves, completion of the leaves, and fall of the leaves is equal to 0.35, 0.6, and 0.25, respectively.     

The origin of mafic rocks in the Naqadeh intrusive complex, Sanandaj-Sirjan Zone, NW Iran

The Naqadeh mafic plutonic rocks are located on a plutonic assemblage and include different granitoid rocks related to ～40 Ma. U-Pb SHRIMP data shows different ages of 96?±?2.3 Ma for mafic rocks. Naqadeh mafic plutonic rocks consist of diorite to diorite-gabbros with relatively high contents of incompatible elements, low Na2O, and $ {\hbox{Mg\# }} = \left[ {{\hbox{molar}}\;{100} \times {\hbox{MgO/}}\left( {{\hbox{MgO}} + {\hbox{FeO}}} \right)} \right] > 44.0 $ . These features suggest that the Naqadeh mafic rocks originate from enriched lithospheric mantle above subducted slab during Neotethys subduction under Iranian plate.