Scour and flow field around a spur dike in a 90° bend

Spur dike is an important element in fiver training that creates rapid variations in flow field, sediment transport and bed topography. The mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. Most of previous investigations on flow behavior and scour around spur dike were carried out in straight channels. In this paper results of experiments on flow field and scour around a spur dike in a 90 degree channel bend are presented, Sand with uniform grain size was used as the bed material, Experiments were conducted for different locations and different lengths of spur dikes at the bend with different values of discharge, The three dimensional flow fields around a spur dike were investigated, The maximum depth of scour was correlated to the Froude numbers, lengths and the locations of spur dike in the bend.     

Biological copper extraction from melting furnaces dust of Sarcheshmeh copper mine

This paper deals with bacterial leaching of copper dust emanating from furnaces at Sarcheshmeh copper complex. Regarding the considerable amount of acid leachable copper, a sulphuric acid leaching process was performed prior to bacterial leaching. Some shake flask and then bioreactor tests were conducted using a mixed culture of Acidithiobacilli and the effect of significant parameters such as culture medium, pulp density and bacterial inoculation rate were investigated. By increasing the pulp density because of higher toxicity and shear stress much more microorganisms and richer nutrient medium were needed. Favoured conditions that governed the agitated bioreactors caused a remarkable promotion in metal dissolution rate in comparison with shake flask. Copper recovery by bacterial leaching in shaking flasks and chemical leaching after 22 d were 87% and 38%, respectively. At the same condition, the maximum copper recovery in bioreactor was 91% within 6.5 d.     

A model of inter-annual variability in beach levels

Beach profile data, collected twice per year at 19 stations over a 25 km length of coastline in Tremadoc Bay, have been analysed to quantify the inter-annual variability in beach levels over a 7 year period and the results compared against the output of a numerical model. Using hourly wind data as forcing, the morphological development of northern Tremadoc Bay was simulated by wave, tidal, longshore transport, total transport and bed level change models. The modelling methodology was efficient and innovative, allowing realistic simulations of long duration with a time step of 1 h, hence capturing the high frequency nature of wind events. The model was run for each of the 7 autumn/winter periods (generally November–April) and the modelled net change in beach levels compared with the data from all 19 stations. The model results had reasonable agreement with the beach profile surveys. However, the observed magnitude of bed level change in the bay lagged the model output by 1 year, indicating that sediment processes acting over a larger area are important in a relatively localised study of inter-annual variability.     

Landslide susceptibility assessment in the Anfu County,China: comparing different statistical and probabilistic models considering the new topo-hydrological factor (HAND)

The present study is aimed at producing landslide susceptibility map of a landslide-prone area (Anfu County, China) by using evidential belief function (EBF), frequency ratio (FR) and Mahalanobis distance (MD) models. To this aim, 302 landslides were mapped based on earlier reports and aerial photographs, as well as, carrying out several field surveys. The landslide inventory was randomly split into a training dataset (70%; 212landslides) for training the models and the remaining (30%; 90 landslides) was cast off for validation purpose. A total of sixteen geo-environmental conditioning factors were considered as inputs to the models: slope degree, slope aspect, plan curvature, profile curvature, the new topo-hydrological factor termed height above the nearest drainage (HAND), average annual rainfall, altitude, distance from rivers, distance from roads, distance from faults, lithology, normalized difference vegetation index (NDVI), sediment transport index (STI), stream power index (SPI), soil texture, and land use/cover. The validation of susceptibility maps was evaluated using the area under the receiver operating characteristic curve (AUROC). As a results, the FR outperformed other models with an AUROC of 84.98%, followed by EBF (78.63%) and MD (78.50%) models. The percentage of susceptibility classes for each model revealed that MD model managed to build a compendious map focused at highly susceptible areas (high and very high classes) with an overall area of approximately 17%, followed by FR (22.76%) and EBF (31%). The premier model (FR) attested that the five factors mostly influenced the landslide occurrence in the area: NDVI, soil texture, slope degree, altitude, and HAND. Interestingly, HAND could manifest clearer pattern with regard to landslide occurrence compared to other topo-hydrological factors such as SPI, STI, and distance to rivers. Lastly, it can be conceived that the susceptibility of the area to landsliding is more subjected to a complex environmental set of factors rather than anthropological ones (residential areas and distance to roads). This upshot can make a platform for further pragmatic measures regarding hazard-planning actions.     

Tidal asymmetry in a tidal creek with mixed mainly semidiurnal tide,Bushehr Port,Persian Gulf

This study investigated the tidal asymmetry imposed by both the interaction of principal tides and the higher harmonics generated by distortions within a tidal creek network with mixed mainly semidiurnal tide in the Bushehr Port, Persian Gulf. Since velocity and water-level imposed by principal triad tides K₁-O₁-M₂ are in quadrature, duration asymmetries during a tidal period in this short, shallow inverse estuary should be manifest as skewed velocities. The principal tides produce periodic asymmetries including a strong ebb-dominance and a weak flood-dominance condition during spring and neap tides respectively. The higher harmonics induced by nonlinearities engender a flood-dominance condition where the convergence effects are higher than frictional effects, and an ebbdominance condition where intertidal storage are extended. Since the triad K₁-O₁-M₂ driven asymmetry is not overcome by higher harmonics close to the mouth, the periodic asymmetry dominates within the creek in which higher harmonics reinforce the weak flood-dominance (strong ebb-dominance) condition in the convergent channel (divergent area). Also, the maximum flood and the maximum ebb from all harmonic constituents occurred close to high water slack time during both spring and neap tides in this short creek. Since occational wetting of intertidal areas happened close to the high water (HW) time during spring tide, the water level flooded slowly close to the HW time of the spring tide.     

On the relationship between MODIS Land Surface Temperature and topography in Iran

Land Surface Temperature (LST) is considered important in monitoring the energy flux between the land surface and atmosphere. Due to the diversity of topography in Iran and its effect on the climate diversity, we decided to study the effect of topography on the LST variations. To this end, the LST digital data derived from the observations of the MODIS Terra and Aqua were used. The results indicated that, during the daytime, from sea level up to a height of 400 meters, the LST increased, and then the temperature decreased with increasing altitude, and up to a height of 3000 meters, there was a strong correlation between the two. LST lapse rate was more during the daytime compared with that of the night time and it was more during the winter compared with the summer. LST lapse rate showed larger variability in diurnal cycle, but its monthly patterns were similar in different aspects. The aspect had substantial effect on LST inversion elevation. Furthermore, the inverse relationship between LST and slope was strong in slopes up to 20°.     

Capability of ETM+ in estimates standing stock in beech stands of mountain forest

Stand volume is an important criterion in forest sciences for monitoring status and function of forests, estimation of productivity, prediction and modeling of forest disturbance, economic and environmental issues, and forest planning. The aim of this research is to evaluate the ETM+ sensor of Landsat 7 satellite data ability for forest timber volume estimation. For this purpose, 40 selective sample plots with 60?×?60 m dimension were selected, and in each sample plot, standing volume was calculated. Correspondent digital data to plots were extracted from spectral and considered as independent variables. Original stand volume data, square root, and logarithm of them were considered as dependent potential for stand volume estimation. Variables using stepwise regression, the best model with coefficient of determination, and adjusted coefficient of determination with regard to determining the appropriate model were modified Log?V=?07.546?+?0.85Greenness???10.564NDWI???28 0.063Band1. In this model, the coefficient of determination and adjusted coefficient of determination were obtained 0.778 and 0.770, respectively. Result showed that spectral data of the mentioned sensor have a moderate.     

Latest Tournaisian–late Viséan foraminiferal biozonation (MFZ8–MFZ14) of the Valiabad area,northwestern Alborz (Iran): geological implications

The Mobarak Formation in the Valiabad area (northwestern Alborz, Iran) is composed of bioclastic, oolitic and sandy limestone interbedded with black shale, and is disconformably underlain and overlain by the Cambrian Lalun and Permian Dorud formations, respectively. In this study, 104 foraminiferal species belonging to 12 families and 33 genera were determined. Among them, six genera and nine species are reported for the first time in Iran. Analysis of the foraminiferal assemblages has identified eight local biozones, which can be correlated with the MFZ8 to MFZ14 zones of the Viséan stratotypes in Belgium. The Valiabad equivalents of these biozones are essentially characterized by (1) Eoparastaffella ex gr. rotunda‐‘florigena’–Lysella cf. gadukensis; (2) Eoparastaffella simplex–Lapparentidiscus bokanensis; (3) Ammarchaediscus; (4) Uralodiscus–Glomodiscus; (5) Glomodiscus–Archaediscus; (6) Pojarkovella–Mstinia fallax; (7) Mstinia bulloides–Pseudoendothyra; and (8) Howchinia gibba–Howchinia bradyana–Tubispirodiscus attenuatus. Consequently, the Valiabad section appears to be one of the most complete Viséan sections in Iran. Some taxonomic precisions are provided about the principal taxa. Biogeographically, (1) the MFZ8–MFZ11 biozones are extended to all the shelves of the Palaeotethys (from Ireland to South China) and Urals oceans; nevertheless, due to the complete evolution of archaediscoids, they seem more related to the Perigondwanan assemblages from Sinai and Taurus (including the Antalya Nappes); (2) the MFZ12 assemblage appears relatively endemic; and (3) the impoverished assemblages of the biozones MFZ13‐14 have marked affinities with the Kazakhstan Block. It is currently impossible to indicate precisely if these variations are related with a drift of the Alborz region to the north, or to a change of oceanic currents. Moreover, the double affinity highlights the narrowness of the Palaeotethys in Iran during the Viséan. Copyright © 2014 John Wiley & Sons, Ltd.