The Effects of Hydrophilic Polymer and Soil Salinity on Corn Growth in Sandy and Loamy Soils

The interaction effects of different applied ratios of a hydrophilic polymer (Superab A200) (0, 0.2, 0.6% w/w) under various soil salinity levels (initial salinity, 4 and 8 ms/cm) were evaluated on available water content (AWC), biomass, and water use efficiency for corn grown in loamy sand and sandy clay loam soils. The results showed that the highest AWC was measured at the lowest soil salinity. The application of 0.6% w/w of the polymer at the lowest salinity level increased the AWC by 2.2 and 1.2 times greater than those of control in the loamy sand and sandy clay loam soils, respectively. The analysis of variance of data showed that the effect of salinity was significant on biomass and water use efficiency of corn in the loamy sand and sandy clay loam soils. The highest amounts of these traits were measured in soils with the lowest salinity level. Application of polymer at the rate of 0.6% in the loamy sand soil and at the rate of 0.2% in the sandy clay loam soil resulted in the highest aerial and root biomass and water use efficiency for corn. At these polymer rates the amounts of water use efficiency for corn were 2.6 and 1.7 times greater than those of control in the loamy sand and sandy clay loam soils, respectively. Thus, the use of hydrophilic polymer in soils especially in the sandy soils increases soil water holding capacity, yield, and water use efficiency of plant. On the other hand, decreases the negative effect of soil salinity on plant and helps for irrigation projects to succeed in arid and semi‐arid areas.     

Effective impervious area for runoff in urban watersheds

Effective impervious area (EIA), or the portion of total impervious area (TIA) that is hydraulically connected to the storm sewer system, is an important parameter in determining actual urban runoff. EIA has implications in watershed hydrology, water quality, environment, and ecosystem services. The overall goal of this study is to evaluate the application of successive weighted least square (WLS) method to urban catchments with different sizes and various hydrologic conditions to determine EIA fraction. Other objectives are to develop insights on the data selection issues, EIA fraction, EIA/TIA ratio, and runoff source area patterns in urban catchments. The successive WLS method is applied to 50 urban catchments with different sizes from less than 1 ha to more than 2000 ha in Minnesota, Wisconsin, Texas, USA as well as Europe, Canada, and Australia. The average, median, and standard deviation of EIA fractions for the 42 catchments with residential land uses are found to be 0.222, 0.200, and 0.113, respectively. These values for the EIA/TIA ratio in the same 42 catchments are 0.50, 0.48, and 0.21, respectively. While the EIA/TIA results indicate the importance of EIA, 95% prediction interval of the mean EIA/TIA is found to be 0.07 to 0.93, which shows that using an average value for this ratio in each land use to determine EIA from TIA in ungauged urban watersheds can be misleading. The successive WLS method was robust and is recommended for determining EIA in gauged urban catchments. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of Shale Distribution on Hydrocarbon Sands Integrated with Anisotropic Rock Physics for AVA Modelling: A Case Study

Shales can be distributed in sand through four different ways; laminated, structural, dispersed and any combination of these aforementioned styles. A careful analysis of well log data is required for the determination of shale distribution in sand affecting its reservoir quality. The objective of this study is to characterize the effect of shale distribution on reservoir quality of sands using well log data. The correlation of well data in terms of lithology has revealed four sand and three shale layers in Lower Goru Formation acting as a major reservoir in the study area. Our results indicate that the laminated type of shale distribution prevails at the Basal sand level, which does not affect its reservoir quality greatly. The remaining layers of variable vertical extent show a variety of shale distribution models affecting their reservoir quality adversely. We also present anisotropic rock physics modelling for AVA analysis at Basal sand level.     

Shear Wave Splitting Analysis to Estimate Fracture Orientation and Frequency Dependent Anisotropy

Shear wave splitting is a well-known method for indication of orientation, radius, and length of fractures in subsurface layers. In this paper, a three component near offset VSP data acquired from a fractured sandstone reservoir in southern part of Iran was used to analyse shear wave splitting and frequency-dependent anisotropy assessment. Polarization angle obtained by performing rotation on radial and transverse components of VSP data was used to determine the direction of polarization of fast shear wave which corresponds to direction of fractures. It was shown that correct implementation of shear wave splitting analysis can be used for determination of fracture direction. During frequencydependent anisotropy analysis, it was found that the time delays in shearwaves decrease as the frequency increases. It was clearly demonstrated throughout this study that anisotropy may have an inverse relationship with frequency. The analysis presented in this paper complements the studied conducted by other researchers in this field of research.     

塔克拉玛干沙漠腹地地表辐射与能量平衡

利用2013年塔克拉玛干沙漠塔中流动沙面地表辐射、土壤热通量、土壤温湿度和湍流通量观测资料,分析了沙漠腹地地表辐射和能量收支特征及闭合状况。结果表明：除潜热通量外,其余地表辐射各分量和能量平衡分量的月平均日变化结果整体均表现为标准的单峰型日循环形态,其中R_s↓与R_s↑变化同步,R_l↑、R_l↓滞后R_s↓0.5 ~ 1 h。各分量均表现出夏季高、春秋季次之、冬季低的季节波动性。干旱和极低的植被覆盖造成沙漠腹地全年潜热通量始终较为微弱,约占净辐射的2.8%,感热通量成为能量的主要消耗形式,约占净辐射的49%。偶尔的降水会刺激潜热通量突然增加。地表反照率相对较高且稳定,日变化呈早晚大、正午小的“U”型趋势,并具有明显的冬季高、夏季低的季节波动性,年均值0.28,月均值0.25~0.32。能量残差各月的日变化也均呈单峰曲线,日出后和日落前能量闭合程度最佳,并出现过闭合现象,全年夏季小,春秋季次之,冬季较大,月平均日峰值5.1~99.9 W·m^-2。土壤表层热储存是影响该地区能量平衡的重要因子之一,考虑表层土壤热存储后,地表能量闭合率达75.3%,能量闭合率夏季 > 春季 > 秋季 > 冬季,白天相比夜间有大幅提升。     

Integrated Interpretation of Interwell Connectivity Using Injection and Production Fluctuations

A method to characterize reservoirs, based on matching temporal fluctuations in injection and production rates, has recently been developed. The method produces two coefficients for each injector–producer pair; one parameter, λ, quantifies the connectivity and the other, τ, quantifies the fluid storage in the vicinity of the pair. Previous analyses used λ and τ separately to infer the presence of transmissibility barriers and conduits in the reservoir, but several common conditions could not be easily distinguished. This paper describes how λ and τ can be jointly interpreted to enhance inference about preferential transmissibility trends and barriers. Two different combinations are useful: one is a plot of log (λ) versus log (τ) for a producer and nearby injectors, and the second is a Lorenz-style flow capacity (F) versus storativity (C) plot. These techniques were tested against the results of a numerical simulator and applied to data from the North Buck Draw field. Using the simulated data, we find that the F–C plots and the λ–τ plots are capable of identifying whether the connectivity of an injector–producer well pair is through fractures, a high-permeability layer, multiple-layers or through partially completed wells. Analysis of data from the North Buck Draw field shows a reasonable correspondence between τ and the tracer breakthrough times. Of two possible geological models for Buck Draw, the F–C and λ–τ plots support the model that has less connectivity in the field. The wells in fluvial deposits show better communication than those wells in more estuarine-dominated regions.     

Frequency analysis of climate extreme events in Zanjan, Iran

In this study, generalized extreme value distribution (GEV) and generalized Pareto distribution (GPD) were fitted to the maximum and minimum temperature, maximum wind speed, and maximum precipitation series of Zanjan. Maximum (minimum) daily and absolute annual observations of Zanjan station from 1961 to 2011 were used. The parameters of the distributions were estimated using the maximum likelihood estimation method. Quantiles corresponding to 2, 5, 10, 25, 50, and 100 years return periods were calculated. It was found that both candidate distributions fitted to extreme events series, were statistically reasonable. Most of the observations from 1961 to 2011 were found to fall within 1–10 years return period. Low extremal index (θ) values were found for excess maximum and minimum temperatures over a high threshold, indicating the occurrence of consecutively high peaks. For the purpose of filtering the dependent observations to obtain a set of approximately independent threshold excesses, a declustering method was performed, which separated the excesses into clusters, then the de-clustered peaks were fitted to the GPD. In both models, values of the shape parameters of extreme precipitation and extreme wind speed were close to zero. The shape parameter was less negative in the GPD than the GEV. This leads to significantly lower return period estimates for high extremes with the GPD model.     

Soil bentonite wall protects foundation from thrust faulting: analyses and experiment

When seismic thrust faults emerge on the ground surface,they are particularly damaging to buildings,bridges and lifelines that lie on the rupture path.To protect a structure founded on a rigid raft,a thick diaphragm-type soil bentonite wall(SBW) is installed in front of and near the foundation,at sufficient depth to intercept the propagating fault rupture.Extensive numerical analyses,verified against reduced–scale(1 g) split box physical model tests,reveal that such a wall,thanks to its high deformability and low shear resistance,"absorbs" the compressive thrust of the fault and forces the rupture to deviate upwards along its length.As a consequence,the foundation is left essentially intact.The effectiveness of SBW is demonstrated to depend on the exact location of the emerging fault and the magnitude of the fault offset.When the latter is large,the unprotected foundation experiences intolerable rigid-body rotation even if the foundation structural distress is not substantial.     

Approximation approach to the SRM based on root decomposition in the simulation of spatially varying ground motions

The spectral representation method(SRM) is widely used to simulate spatially varying ground motions.This study focuses on the approximation approach to the SRM based on root decomposition,which can improve the efficiency of the simulation.The accuracy of the approximation approach may be affected by three factors: matrix for decomposition,distribution of frequency interpolation nodes and elements for interpolation.The influence of these factors on the accuracy of this approach is examined and the following conclusions are drawn.The SRM based on the root decomposition of the lagged coherency matrix exhibits greater accuracy than the SRM based on the root decomposition of the cross spectral matrix.The equal energy distribution of frequency interpolation nodes proposed in this study is more effective than the counter pith with an equal spacing.Elements for interpolation do not have much of an effect on the accuracy,so interpolation of the elements of the decomposed matrix is recommended because it is less complicated from a computational efficiency perspective.