The Pushtashan juvenile suprasubduction zone assemblage of Kurdistan (northeastern Iraq): A Cretaceous (Cenomanian) Neo-Tethys missing link

The Pushtashan suprasubduction zone assemblage of volcanic rocks, gabbros, norites and peridotites occurs in the Zagros suture zone, Kurdistan region, northeastern Iraq. Volcanic rocks are dominant in the assemblage and consist mainly of basalt and basaltic andesite flows with interlayered red shale and limestone horizons. Earlier lavas tend to be MORB-like, whereas later lavas display island arc tholeiite to boninitic geochemical characteristics. Tholeiitic gabbros intrude the norites and display fractionation trends typical of crystallisation under low-pressure conditions, whereas the norites display calc-alkaline traits, suggesting their source included mantle metasomatised by fluids released from subducted oceanic crust. Enrichment of Rb, Ba, Sr, Th and the presence of negative Nb anomalies indicate generation in a suprasubduction zone setting. Trondhjemite and granodiorite intrusions are present in the volcanic rocks, gabbros and norites. SHRIMP U-Pb dating of magmatic zircons from a granodiorite yields a mean~(206)Pb/~(238)U age of 96.0 ±2.0 Ma(Cenomanian). The initial ε_(Hf) value for the zircons show a narrow range from +12.8 to+15.6, with a weighted mean of + 13.90±0.96. This initial value is within error of model depleted mantle at 96 Ma or slightly below that, in the field of arc rocks with minimal contamination by older continental crust. The compositional bimodality of the Pushtashan suprasubduction sequence suggests seafloor spreading during the initiation of subduction, with a lava stratigraphy from earlyerupted MORB transitioning into calc-alkaline lavas and finally by 96 Ma intrusion of granodioritic and trondhjemitic bodies with juvenile crustal isotopic signatures. The results confirm another Cretaceous arc remnant preserved as an allochthon within the Iraqi segment of the Cenozoic Zagros suture zone. Implications for the closure of Neo-Tethys are discussed.     

Performance and environmental impact of a turbojet engine fueled by blends of biodiesels

Depletion of conventional fuels, concerns about environmental pollution and the tightening of exhaust emission legislations are the main reasons for increasing research on alternative fuels produced from agricultural feedstock. In this study, biodiesel fuels produced from cotton and corn vegetable oils are investigated as renewable fuels for a gas turbine engine for aviation. The biodiesel fuels are defined as cotton methyl ester (CTME) and corn methyl ester. The performance characteristics and exhaust emissions of the gas turbine engine are investigated when the engine fueled with three blends of 10%(B10), 20%(B20) and 50%(B50) of biodiesel/JetA-1 by volume. The biodiesel fuels were produced using transesterification process and characterized according to ASTM biodiesel specifications. Chemical and physical properties show a real potential of using biodiesel blends as an alternative for JetA-1. The measured engine performance parameters and exhaust emissions are compared with that of pure JetA-1 over a range of throttle setting. The gas turbine engine used in this study is equipped with pressure, flow, temperature, thrust and speed sensors that connected to data acquisition system and control unit in addition to exhaust gas analyzer. The experimental results show that biodiesel fuels can be used up to blend of 50% with JetA-1 in gas turbine engines with slight enhancement in engine performance and significant improvements in exhaust emissions. The engine static thrust is increased with 2% for B50 at lower and medium engine speeds and decreased with 11% at high engine speed compared to conventional JetA-1 fuel. The thrust-specific fuel consumption for biodiesel blends is lower than that for regular JetA-1 fuel. The gas turbine engine efficiency is increased for biodiesel blends by 14% compared to JetA-1, and this is reported for CTME B50. For oxygen concentration in exhaust gases emissions, the higher the biodiesel blend, the higher the O₂ concentration in the exhaust compared with JetA-1 fuel. The O₂ level increased by 6% for biodiesel blend of B50 compared to JetA-1 fuel. The emissions of CO and HC emissions decreased by 5 and 37%, respectively, compared with conventional JetA-1. Additionally, the biodiesel blends achieve a higher CO₂ and NO_x emissions with 11 and 27%, respectively, compared to JetA-1. The sulfur dioxide SO₂ decreased by 75% compared to the regular JetA-1 fuel.     

Evaluating the production and bio-stimulating effect of 5-methyl 1, hydroxy phenazine on microbial fuel cell performance

The role of endogenous redox mediators has considerable importance in electron shuttling reactions and associated performance of microbial fuel cell. Single-chamber microbial fuel cell-II with dual air-cathode assembly (area = 18.84 cm²) supported highest bacterial (Pseudomonas aeruginosa) density (6.7 × 10⁹) and active biomass [4.4 ± 0.3 mg cm^?2 (carbon content = 0.48 ± 0.1 mg cm^?2)] on anode thereby resulting in maximum production of redox metabolite, 5-methyl 1, hydroxy phenazine (301 ppm) and voltage (595 ± 5 mV) than similar cells with relatively less surface area of cathode. It was further revealed that 5-methyl 1, hydroxy phenazine production was positively correlated with chemical oxygen demand removal rate (77 ± 2.5%) and power generation (66.6 ± 2.2 mW cm^?2) efficiency of single-chamber microbial fuel cell-II. Maximum power density of 258 ± 4.5 mW cm^?2 was generated when reactor was supplemented with 2 ml crude extract of 5-methyl 1, hydroxy phenazine metabolite, whereas power output was about 229 ± 2.5 mW cm^?2 when reactor was bio-stimulated with 1 ml pure extract of 5-methyl 1, hydroxy phenazine. With this concentration, the electrochemical response of mixed culture biofilm (sediment) was enhanced by 99.3%. However, further increase in concentration of endogenous mediator proved to be limiting on reactor performance. Pyrosequencing and phylogenetic analysis on the basis of partial 16S rRNA sequences demonstrated both culturable and unculturable bacterial species in anodic biofilm and relative abundance of family Pseudomonadaceae was found to be maximum, i.e., 61.7% followed by Rhodocyclaceae 19.2%, Xanthomonadaceae 6.3% and Opitutaceae 3.18%.     

Cu (II) removal intensification using Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles under inert gas and magnetic field in a microchannel

In the present study, Cu (II) ions removal from aqueous solution was intensified by exciting magnetic nanoparticles under inert gas, magnetic field and combination of these two mixing methods in a T-type microchannel. The flow patterns and liquid–liquid two-phase mass transfer were studied in three different magnet distances from mixing channel (3, 6 and 10 mm) and also in the presence of different inert gas flow rates (1, 3 and 5 mL/min). Depending on the mixing method and the flow rate of both phases, several distinct flow patterns were observed including slugs, droplet, parallel and dispersed flows. The performances of mixing techniques for mass transfer enhancement based on relative removal efficiency ratio (λ) and mass transfer coefficient ratio (γ) were compared with simple layout (without nanoparticles, magnetic field and inert gas). The results showed that simultaneous using of inert gas and magnetic field can drive the nanoparticles as mixer. Liquid–liquid mass transfer with 27–62% enhancement in E and 235–285% in K _L a compared with plain one was observed.     

Feasibility,emission and fuel requirement analysis of hybrid car versus solar electric car: a comparative study

The problem regarding environment has been considered as contemporary issue, and to cater this, various technologies have been revolutionized in vehicle transport field. Efforts have been made to make vehicle engine efficient and introducing hybridized vehicles with the aim of reducing emissions and less fuel dependency. In essence of this, trends of solar electric cars in different countries have been reviewed. Feasibility analysis is done by doing fuel cost analysis of two cases, i.e., simple hybrid vehicle and hybrid vehicle equipped with solar module and increased battery energy storage capacity for a specific round trip distance between two cities, i.e., Rawalpindi and Islamabad in comparison with feasibility of third case, i.e., proposed solar electric car model. The solar module selection along with desired number of batteries with charging and discharging time and motor power required to carry five persons weight (70 kg each) is calculated for third case. Moreover, total carbon dioxide emission analysis has been carried out from car material production to its assembly, manufacturing solar module and nickel metal hydride battery for each case. The annual carbon dioxide emitted from fuel in first two cases relative to electric outlet in third case for specific distance has been analyzed. On large scale, emission analyses for hundred cars of each case have been done at 100 km distance. From calculations, it is revealed that overall emissions in third case on large scale and from its material production, assembly, solar module and batteries manufacturing perspective are comparatively less than other cases.     

Biosynthesis and genetics of polyhydroxyalkanoates by newly isolated <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> IFS and 30N using inexpensive carbon sources

Poly(3-hydroxyalkanoates) (PHAs) are the bioplastics that are stored in many genera of bacteria as carbon and energy storage polyester granules. PHAs have established themselves as strong competitors to conventional plastics. This study reports the isolation of PHA-accumulating bacteria from local environment and their PHA characterization. Two potential strains identified as Pseudomonas aeruginosa strain IFS (Accession no. JQ041638) and P. aeruginosa strain 30N (Accession no. JQ041639) based on 16S rRNA gene sequence identity were cultivated under nitrogen limited conditions to study their PHA biosynthesis capabilities. The strain IFS and strain 30N produced 1.36 and 1.40 gl^?1 dry biomass with percentage PHA contents of 44.85 and 45.74%, respectively, when grown on glucose as carbon source. The PHA was identified as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by fourier transform infrared spectroscopy (FTIR) and gas chromatography coupled with mass spectrometry (GC–MS). The PHA synthase genes of these strains were isolated, sequenced and analyzed using bioinformatic tools that showed they belonging to type 2 PHA synthases and presented their evolutionary relationships with PHA synthases of other Pseudomonas species. The experimental results of this study highlight the importance of these strains for future use of bacterial biopolymer production growing on simple and inexpensive carbon sugars.     

A state boundary surface model for improving the dilatancy simulation of granular material in reinforced anchors

It is acknowledged that for extending the experimental results to real scale design, it is necessary to use an appropriate numerical analysis. The good analysis in geotechnical problems needs to adopt a suitable constitutive model for the materials. This paper presents a modeling approach to investigate the complex behavior of granular trench and reinforcement system. For this purpose, an experimental and numerical investigation has been carried out on the behavior of pullout resistance of an embedded anchor (circular plate) with and without geogrid reinforcement layers in stabilized loose and dense sand using a granular trench. Different parameters have been considered, such as number of geogrid layers, embedment ratios, relative density of soil, and height ratios of granular trench. Finite element analysis with Hardening Soil Model was utilized for sand and CANAsand constitutive model was used for granular trench to investigate failure mechanism and the associated rupture surfaces. Results showed that, when soil was improved with the granular-geogrid trench, the uplift force significantly increased, but in geogrid-reinforced granular trench condition, the ultimate pullout resistance at failure increased as the number of geogrid layers increased up to the third layer, the fifth layer had a negligible effect in comparison with the third layer of reinforcement. The ultimate uplift capacity of anchor plate and the variation of surface deformation for all the tests indicated a close agreement between the experimental and numerical models.     

Assessing desertification by using soil indices

Desertification generally refers to land degradation in arid, semiarid, and dry semi-humid climatic zones. It involves five principal processes: vegetation degradation, water erosion, wind erosion, salinization and waterlogging, and soil crusting and compaction. The aim of this study is assessing desertification using soil criteria. For this purpose, nine indices including sodium absorption ratio (SAR), soil gypsum percentage, soil texture, the content of HCO₃ ^?, the percentage of the organic matter, electrical conductivity (EC), pH, the content of the soil sodium, and chloride were used. The soil samples were taken in the north of Zayandeh-Rood River in Isfahan province of Iran, using soil data randomly sampled in a depth of 0–20 cm. After assessing the normality of the samples using Kolmogorov-Smirnov test, indices were imported into GIS environment and interpolated with IDW and normal and discrete kriging methods for delineating soil characteristics maps based on MEDALUS model. In this model, the data were firstly changed from 100 to 200. Thus 100 and 200 are estimated as the best and worst quality, respectively. Then the final map of soil criteria has been created by geometric mean of its indicators. The results showed that the maximum area is related to the medium class of desertification and is equal to 44,746 ha. The areas of severe and very severe classes of desertification are equal to 30,949 and 351 ha, respectively. The results also revealed that the indices of the organic matter and soil gypsum percentage are the most influential indices which affect desertification phenomenon.     

Present environmental status of Al-Kharrar Lagoon,central of the eastern Red Sea coast,Saudi Arabia

Al-Kharrar Lagoon is a fossil back-reef basin with hypersaline waters, situated 10 km northwest of Rabigh city, central of the eastern Red Sea coast, Saudi Arabia. About 130 stations were selected for measurements of the lagoon’s water temperature, salinity, pH, dissolved oxygen, and water depths during March 2014. The common macro-algae, flora, and fauna were also sampled and identified. The present study aims to investigate the prevailing environmental parameters and their impact on the macro-fauna/flora of the lagoon. The average water depth of the lagoon was around 5 m and reached maximum values of 8 and 16 at the lagoon centre and inlet, respectively. The results showed that the lagoon’s surface water temperature and salinity have mean values of 25 °C and 40‰, but with extreme values of 30 °C and 45‰ that occurred only at the enclosed intertidal areas, respectively. Their dissolved oxygen (DO) and pH were 6.5 mg/l and 8.3, respectively and the latter showing the highest values up to 8.5 in the intertidal areas dominated by the green cyanobacteria. These physicochemical conditions make the lagoon as a favorite place for the mangrove Avicennia marina, macro-algae, seagrasses (Halophila stipulacea and Cymodocea rotundata), and algal mats (Cyanobacteria) which dominate the intertidal and supratidal areas of the lagoon, tolerating extremely high-salinity and high-temperature conditions. On the other hand, corals were observed alive at the southern part of the lagoon, immediately south of the Al-Ultah Islet. Vertical profiles of temperature, salinity, and density in the lagoon’s water indicated that the water column consists of two layers throughout the year.     

The rainfall-runoff model GR4J optimization of parameter by genetic algorithms and Gauss-Newton method: application for the watershed Ourika (High Atlas,Morocco)

Hydrological modeling aims to place the disposal of water actors, very simple tools for hydrological simulation to start with, the basic observations made on rainfall until the reproduction of the response the flow of a basin. The aims of this work consist, first, of testing the model GR4J (Génie Rural à 4 paramètres Journalier) performances of the rain-flow in semi-arid environment watershed and secondly, of highlighting the contribution of new optimization techniques (genetic algorithm, Gauss-Newton) in determining the optimal parameters of the model. The results obtained show that those methods of optimization are robust and reliable in comparison with the “solver” optimization used in Excel that usually applies for GR4J model. In terms of the model performances, we obtained a very satisfying results. Also, the simulations clearly show the influence of the melting snow on the Ourika’s basin flows; indeed, taking into account this component in the model allowed a consecutive improvement of the simulations.