Measurements of Flows Over Isolated Valleys

Wind-tunnel measurements of the flow over an isolated valley both normal and at an angle (45°) to a simulated neutrally stable atmospheric boundary layer are presented. Attention is concentrated on the nature of the flow within the valley itself. The work formed part of a wider study that included detailed field measurements around an African desert valley and some limited comparisons with that work are included. A scale of about 1:1000 was used for the laboratory work, in which an appropriate combination of hot wire and particle image velocimetry was employed. For a valley normal to the upwind flow, it is shown that the upstream influence of the valley extends to a distance of at least one half of the axial valley width upstream of the leading edge, whereas differences in mean flow and turbulence could be identified well beyond two valley widths from the downwind edge. Non-normal wind angles lead to significant along-valley flows within the valley and, even at two valley heights above the valley ridge level, there remains a significant spanwise flow component. Downwind turbulence levels are somewhat lower in this case, but are still considerably higher than in the undisturbed boundary layer. At both flow angles, there are significant recirculation regions within the valleys, starting from mean separation just beyond the leading edge, but the strong spanwise flow in the 45° case reduces the axial extent of the separated zone. The flow is shown to be in some ways analogous to flow over an isolated hill. Our results usefully enhance the field data and could be used to improve modelling of saltation processes in the field.     

CO<Subscript>2</Subscript> Air–Sea Exchange due to Calcium Carbonate and Organic Matter Storage,and its Implications for the Global Carbon Cycle

Release of CO₂ from surface ocean water owing to precipitation of CaCO₃ and the imbalance between biological production of organic matter and its respiration, and their net removal from surface water to sedimentary storage was studied by means of a quotient θ = (CO₂ flux to the atmosphere)/(CaCO₃ precipitated). θ depends not only on water temperature and atmospheric CO₂ concentration but also on the CaCO₃ and organic carbon masses formed. In CO₂ generation by CaCO₃ precipitation, θ varies from a fraction of 0.44 to 0.79, increasing with decreasing temperature (25 to 5°C), increasing atmospheric CO₂ concentration (195–375 ppmv), and increasing CaCO₃ precipitated mass (up to 45% of the initial DIC concentration in surface water). Primary production and net storage of organic carbon counteracts the CO₂ production by carbonate precipitation and it results in lower CO₂ emissions from the surface layer. When atmospheric CO₂ increases due to the ocean-to-atmosphere flux rather than remaining constant, the amount of CO₂ transferred is a non-linear function of the surface layer thickness because of the back-pressure of the rising atmospheric CO₂. For a surface ocean layer approximated by a 50-m-thick euphotic zone that receives input of inorganic and organic carbon from land, the calculated CO₂ flux to the atmosphere is a function of the CaCO₃ and C_org net storage rates. In general, the carbonate storage rate has been greater than that of organic carbon. The CO₂ flux near the Last Glacial Maximum is 17 to 7×10¹² mol/yr (0.2–0.08 Gt C/yr), reflecting the range of organic carbon storage rates in sediments, and for pre-industrial time it is 38–42×10¹² mol/yr (0.46–0.50 Gt C/yr). Within the imbalanced global carbon cycle, our estimates indicate that prior to anthropogenic emissions of CO₂ to the atmosphere the land organic reservoir was gaining carbon and the surface ocean was losing carbon, calcium, and total alkalinity owing to the CaCO₃ storage and consequent emission of CO₂. These results are in agreement with the conclusions of a number of other investigators. As the CO₂ uptake in mineral weathering is a major flux in the global carbon cycle, the CO₂ weathering pathway that originates in the CO₂ produced by remineralization of soil humus rather than by direct uptake from the atmosphere may reduce the relatively large imbalances of the atmosphere and land organic reservoir at 10²–10⁴-year time scales.     

Reaction-induced grain boundary cracking and anisotropic fluid flow during prograde devolatilization reactions within subduction zones

Devolatilization reactions during prograde metamorphism are a key control on the fluid distribution within subduction zones. Garnets in Mn-rich quartz schist within the Sanbagawa metamorphic belt of Japan are characterized by skeletal structures containing abundant quartz inclusions. Each quartz inclusion was angular-shaped, and showed random crystallographic orientations, suggesting that these quartz inclusions were trapped via grain boundary cracking during garnet growth. Such skeletal garnet within the quartz schist formed related to decarbonation reactions with a positive total volume change (?V _t > 0), whereas the euhedral garnet within the pelitic schists formed as a result of dehydration reaction with negative ?V _t values. Coupled hydrological–chemical–mechanical processes during metamorphic devolatilization reactions were investigated by a distinct element method (DEM) numerical simulation on a foliated rock that contained reactive minerals and non-reactive matrix minerals. Negative ?V _t reactions cause a decrease in fluid pressure and do not produce fractures within the matrix. In contrast, a fluid pressure increase by positive ?V _t reactions results in hydrofracturing of the matrix. This fracturing preferentially occurs along grain boundaries and causes episodic fluid pulses associated with the development of the fracture network. The precipitation of garnet within grain boundary fractures could explain the formation of the skeletal garnet. Our DEM model also suggests a strong influence of reaction-induced fracturing on anisotropic fluid flow, meaning that dominant fluid flow directions could easily change in response to changes in stress configuration and the magnitude of differential stress during prograde metamorphism within a subduction zone.     

Environmental controls on clay mineralogy of an Early Jurassic mudrock (Blue Lias Formation,southern England)

We present a dataset including clay mineralogy, gamma-ray spectrometry, organic matter content and magnetic susceptibility of the Hettangian to lowest Sinemurian successions of Dorset and Somerset, southern UK (Blue Lias Formation, Bristol Channel and Wessex basins). In both areas, the clay assemblages comprise predominantly detrital illite, kaolinite and illite/smectite mixed layers. Clays probably originated from the erosion of the Hercynian massifs, the relative proportions of kaolinite and illite being modulated by arid-humid climatic fluctuations. The organic matter (OM) content (types II to IV) ranges up to 12% in both areas. A clear stratigraphical trend in clay mineral assemblages is apparent in Somerset, whereas in Dorset sharp contrasts between adjacent horizons and a greater dilution by carbonate mask the long-term evolution. Correlations between both areas based on similar vertical trends in clay mineral abundance support the suggestion of a hiatus within the angulata Zone of the Dorset succession. As expected, the kaolinite/illite ratio correlates with the Th/K ratio deduced from gamma-ray spectrometry. However, significant departures from the correlation occur in OM-rich intervals, suggesting that Th may be partly adsorbed on to OM particles. Surprisingly, high magnetic susceptibility correlates with abundant kaolinite, not with Fe-rich clays, indicating either that kaolinite is accompanied by a soil-inherited magnetisable phase (possibly iron oxide) or that illite-rich rocks are more strongly diluted by carbonate than are kaolinite-rich strata.     

Yaxcopoil-1 and the Chicxulub impact

CSDP core Yaxcopoil-1 was drilled to a depth of 1,511 m within the Chicxulub crater. An organic-rich marly limestone near the base of the hole (1,495 to 1,452 m) was deposited in an open marine shelf environment during the latest Cenomanian (uppermost Rotalipora cushmani zone). The overlying sequence of limestones, dolomites and anhydrites (1,495 to 894 m) indicates deposition in various carbonate platform environments (e.g., sabkhas, lagoons). A 100-m-thick suevite breccia (894–794 m) identifies the Chicxulub impact event. Above the suevite breccia is a dolomitic limestone with planktic foraminiferal assemblages indicative of Plummerita hantkeninoides zone CF1, which spans the last 300 ky of the Maastrichtian. An erosional surface 50 cm above the breccia/dolomite contact marks the K/T boundary and a hiatus. Limestones above this contact contain the first Tertiary planktic foraminifera indicative of an upper P. eugubina zone P1a(2) age. Another hiatus 7 cm upsection separates zone P1a(2) and hemipelagic limestones of planktic foraminiferal Zone P1c. Planktic foraminiferal assemblages of Zone Plc to P3b age are present from a depth of 794.04 up to 775 m. The Cretaceous carbonate sequence appears to be autochthonous, with a stratigraphic sequence comparable to late Cretaceous sediments known from outside the Chicxulub crater in northern and southern Yucatan, including the late Cenomanian organic-rich marly limestone. There is no evidence that these sediments represent crater infill due to megablocks sliding into the crater, such as major disruption of sediments, chaotic changes in lithology, overturned or deep dipping megablocks, major mechanical fragmentation, shock or thermal alteration, or ductile deformation. Breccia units that are intercalated in the carbonate platform sequence are intraformational in origin (e.g., dissolution of evaporites) and dykes are rare. Major disturbances of strata by the impact therefore appear to have been confined to within less than 60 km from the proposed impact center. Yaxcopoil-1 may be located outside the collapsed transient crater cavity, either on the upper end of an elevated and tilted horst of the terrace zone, or even outside the annular crater cavity. The Chicxulub site thus records a large impact that predates the K/T boundary impact and mass extinction.     

The effect of chlorite interlayering on <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar biotite dating: an <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar laser-probe and TEM investigations of variably chloritised biotites

Biotite is one of the most common minerals dated by the ⁴⁰Ar–³⁹Ar method. It frequently shows K contents below the expected stoichiometric value, suggesting the presence of low-K impurities. The most common low-K alteration product of biotite is chlorite. Therefore, it is important to understand the effects of chlorite interlayering on ⁴⁰Ar–³⁹Ar ages in order to correctly interpret ⁴⁰Ar–³⁹Ar data. This study examines the outcome of ⁴⁰Ar–³⁹Ar dating analyses on variably chloritised biotites from Ordovician intrusive rocks. The infrared (IR) laser-probe technique and different gas extraction methods were adopted. Incremental laser-heating data on bulk samples yielded hump-shaped age profiles with meaningless young and old age steps. Both the extent of anomalous old age steps and the degree of discordance of the age spectra were much more pronounced in the more chloritised biotite samples. In contrast, in situ data on rock chips and total-fusion ages on single biotite flakes yielded ages concordant with, or younger than, the inferred emplacement ages. Transmission electron microscopy (TEM) was used to texturally characterise biotite samples at the nanometre scale. It was also used to document the complex decomposition-transformation process affecting interlayered biotite–chlorite during in-vacuo IR-laser heating to temperatures ranging from ~600 to >1,000 °C. TEM results suggest that hump-shaped age profiles result from an interplay between ³⁹Ar_K redistribution by recoil during sample irradiation and differential release of argon isotopes hosted in three main reservoirs. These reservoirs are (from least to most retentive): extended defects, chlorite and biotite. The final descending age segment is attributed to the progressive release of argon with increasing temperature from large biotite domains for which ³⁹Ar_K recoil loss was less important. ⁴⁰Ar–³⁹Ar data support previous findings, which suggest that ⁴⁰Ar–³⁹Ar ages when recoil effects are minimised, provide minimum estimates that approach the true biotite age, when the pristine domains are analysed. The most effective approach for obtaining meaningful ⁴⁰Ar–³⁹Ar ages was using individual total-fusion analyses on carefully selected, single flakes previously split along the basal cleavage by wet-grinding and corresponding to a sample mass of a few micrograms.Editorial responsibility: I Parsons     

Mineralogy of suspended sediment in three karst springs

Springs in karstic carbonate rocks frequently carry a sediment load as well as a dissolved load. Analysis of morphology and mineralogy of suspended sediment from three contrasting karst springs reveals a suite of clastic particles that reflect both source areas and processes that take place within the aquifer. Nolte Spring in Lancaster County, Pennsylvania, USA, discharges sediment of apparently precipitated calcite, indicating that at some point in the aquifer or vadose zone, water exceeds saturation with respect to calcite. Sediment morphologies and chemical conditions in the aquifer point to two different scenarios for this precipitation. The other two springs, Arch Spring in Blair County, Pennsylvania and Bushkill Spring in Northampton County, Pennsylvania, show no evidence of calcite precipitation. Arch Spring discharges mainly layer silicates, while Bushkill Spring discharges mainly silica.

---

Resumen Los manantiales en rocas carbonatadas karstficadas tienen frecuentemente una carga de sedimentos y de sólidos disueltos. Los análisis de la morfología y mineralogía de los sedimentos suspendidos de tres manantiales kársticos contrastados revela un conjunto de partículas clásticas que reflejan ambas áreas fuente y los procesos que tienen lugar dentro del acuífero. Nolte Spring en el Condado de Lancaster, Pennsylvania, USA, descarga sedimento de calcita aparentemente precipitada indicando que en cierto punto del acuífero o en la zona vadosa, el agua supera la saturación con respecto a la calcita. La morfología de los sedimentos y las condiciones químicas en el acuífero apuntan a dos escenarios diferentes para esta precipitación. Los otras dos manantiales, Arch Spring en el Condado de Blair, Pennsylvania y Bushkill Spring en el Condado de Norhtampton, Pennsylvania, no muestran evidencia de precitación de calcita. Arch Spring descarga principalmente filosilicatos mientras que Bushkill Spring descarga fundamentalmente Sílice.

---

Résumé Les sources situées en contexte carbonaté karstique charrient fréquemment, outre les matières dissoutes, une charge solide. La morphologie et la minéralogie des sédiments en suspension issus de trois sources karstiques de caractéristiques distinctes ont été analysées : une série de particules clastiques, reflétant à la fois les secteurs des sources et les processus internes de l’aquifère, en ressort. Les sédiments issus de Nolte Spring (Comté de Lancaster, Pennsylvanie, Etats-Unis) sont constitués de calcite apparemment précipitée: ceci indique que l’eau atteint la sursaturation vis-à-vis de la calcite à un certain point de l’aquifère ou de la zone non-saturée. La morphologie des sédiments et les conditions chimiques au sein de l’aquifère mènent à deux scénarii différents pour expliquer cette précipitation. Les deux autres sources, Arch Spring (Comté de Blair, Pennsylvanie) et Bushkill Spring (Comté de Northampton, Pennsylvanie), ne présentent aucun indice de précipitation de calcite. Arch Spring exporte essentiellement des phyllosilicates, alors que la silice est majoritaire à Bushkill Spring.

     

Simulations of Annual Cycle of Phytoplankton Production and the Utilization of Nitrogen in the Yellow Sea

A nutrient dynamic model coupled with a 3D physical model has been developed to study the annual cycle of phytoplankton production in the Yellow Sea. The biological model involves interactions between inorganic nitrogen (nitrate and ammonium), phosphate and phytoplankton biomass. The model successfully reproduces the main features of phytoplankton-nutrient variation and dynamics of production. 1. The well-mixed coastal water is characterized by high primary production, as well as high new production. 2. In summer, the convergence of tidal front is an important hydrodynamic process, which contributes to high biomass at frontal areas. 3. The evolution of phytoplankton blooms and thermocline in the central region demonstrate that mixing is a dominant factor to the production in the Yellow Sea. In this simulation, nitrate- and ammonium-based productions are estimated regionally and temporally. The northern Yellow Sea is one of the highly ranked regions in the Yellow Sea for the capability of fixing carbon and nitrogen. The annual averaged f-ratio of 0.37 indicates that regenerated production prevails over the Yellow Sea. The result also shows that phosphate is the major nutrient, limiting phytoplankton growth throughout the year and it can be an indicator to predict the bloom magnitude. Finally, the relative roles of external nutrient sources have been evaluated, and benthic fluxes might play a significant role in compensating 54.6% of new nitrogen for new production consumption.