An integrated approach for validating unsaturated soil parameters in seepage analyses

Soil–water characteristic curves (SWCCs) and soil permeability functions (SPFs) for a silty sand were validated based on soil suction and soil water content measurements in calibration box and constant-head seepage tests. Transient seepage analyses using finite element method (FEM) were performed to examine the accuracy of the derived SWCCs and SPFs, with a special focus on the wetting front propagation. Results show that the proposed new integrated system consisting of experimental and analytical techniques works well, in the sense that the soil moisture responses at specific depths of soil mimic those measured in constant-head seepage tests.     

Tephrochronological study in the quaternary Val d’Agri intermontane basin (Southern Apennines,Italy)

In the south-eastern depocentre of the Val d’Agri basin (Southern Apennines), a volcanic ash layer crops out interbedded within poorly structured alluvial fan deposits of Late Pleistocene age. Textural, depositional and pedological features of this weathered layer suggest a primary deposition from a pyroclastic fall-out of volcanic ash. Chemical analyses of feldspars show an alkali trachytic composition and accessory minerals association allow to correlate this tephra layer with the regionally dispersed Y-7 marine tephra layer (Tufo Verde Epomeo eruption, Ischia volcano), dated at 56 ± 4 ka. The Val d’Agri tephra here described for the first time was deposited during MIS Stage 3. Its recovery and characterization permit to contribute to regional correlation of the Mediterranean climatic and volcanic events from marine to continental successions and to describe landscape evolution of the Southern Apennines during glacial–interglacial cycles.     

Hydrogeological study of the intensely exploited aquifer of the Santa Croce leather-producing district, Tuscany (central Italy)

A hydrogeological study was undertaken to define the groundwater circulation in the Santa Croce area (Tuscany, central Italy) where the existing multilayered aquifer has long been intensively exploited. Investigations carried out on about 150 wells revealed the existence of a deep piezometric depression (to 20?m below sea level) which drains groundwater from the entire surrounding area. Samples from about 70 water points, collected twice in 2007, were analysed for major elements and stable isotope composition. Three major groups of waters, which mix in the study area, have been distinguished: (1) waters of the Ca?CMg?CHCO₃ type mainly flowing along the Arno River Plain; (2) waters of the Na?CK?CCl/Ca?CMg?CHCO₃?CSO_4, type with SO₄ content up to 275?mg/L, inflowing from the Pisane Hills; (3) relatively high-salinity waters mainly of the Na?CHCO₃ type which, with Cl concentrations up to 750?mg/L, likely arise from a normal fault located at the foot of the northern hills. The characteristics of the different components are greatly affected by significant modifying processes such as cation exchange and sulfate reduction. The achieved conceptual model suggests the southern hills as the main recharging area of the aquifer system from which water circulation, characterized by pathways of different length and depth, develops.     

Equivalent granular state parameter and undrained behaviour of sand�Cfines mixtures

State parameter defined using void ratio, e, and the steady-state line has been shown to be effective in predicting the undrained behaviour of sand. However, steady-state line for sand with fines is dependent on fines content. To overcome this problem, the concept of equivalent granular void ratio, e*, has been well investigated. However, the conversion from e to e* has been essentially a back-analysis process. A methodology for converting e to e* without the need of a back-analysis process was first presented. The concept of equivalent granular state parameter, ψ*, defined in terms of e*, and equivalent granular steady-state line was then developed. An extensive experimental study was conducted to investigate whether ψ* can capture the effects of fines content, and thus can be used to correlate undrained behaviour of sand–fines mixtures without the need of separately considering the effects of fines content. This study suggested that the effective stress path and deviatoric stress–strain responses in undrained shearing can be correlated with the ψ* value at the start of undrained shearing irrespective of fines content.     

Integrating Meteosat satellite and rain-gauge information to estimate rainfall patterns

This paper presents the development and the application of techniques for the integration of information coming from Meteosat satellite images and rain-gauge measurements, with the purpose of estimating the rainfall pattern on a certain river basin. The proposed integration techniques are based on the definition of a data coherence problem and on the application of mathematical programming methods. The quality of the estimation procedure is evaluated by using a rainfall/runoff model for the basin which allows the generation of a hydrograph at a given section of the river, on the basis of the above estimated rainfall pattern in the upstream watershed. The comparison of the hydrograph with the observed one allows the parametric tuning of the integration procedure.     

Primary and diagenetic isotopic signals in fossils and hemipelagic carbonates: the Lower Jurassic of northern Spain

Stable isotope and trace element analyses of 230 Jurassic (Pliensbachian–Toarcian) samples from northern Spain have been performed to test the use of geochemical variations in fossils (belemnites and brachiopods) and whole‐rock hemipelagic carbonates as palaeoceanographic indicators. Although the succession analysed (Reinosa area, westernmost Basque–Cantabrian Basin) has been subject to severe thermal alteration during burial diagenesis, the samples appear to be well preserved. The degree of diagenetic alteration of the samples has been assessed through the application of integrated petrographic, chemical and cathodoluminescence analyses. It is demonstrated that brachiopods and whole‐rock carbonates, although widely used for palaeoceanic studies, do not retain their primary marine geochemical composition after burial diagenesis. In contrast, there is strong evidence that belemnite rostra preserve original isotopic values despite pervasive diagenesis of the host rock. Well‐preserved belemnite shells (non‐luminescent to slightly luminescent) typically show stable isotope values of +4·3‰ to –0·7‰δ¹³C, +0·7‰ to –3·2‰δ¹⁸O, and trace element contents of <32 μg g^–1 Mn, <250 μg g^–1 Fe, >950 μg g^–1 Sr and Sr/Mn ratios >80. This study suggests that the degree to which diagenesis has affected the preservation of an original isotopic composition may differ for different low‐Mg calcite fossil shells and hemipelagic bulk carbonates, behaviour that should be considered when marine isotopic signatures from other ancient carbonate rocks are investigated. Multiple non‐luminescent contemporaneous belemnite samples passed the petrographic and geochemical tests to be considered as palaeoceanic recorders, yet their δ¹³C and δ¹⁸O values exhibited moderate scatter. Such variability is likely to be related to the palaeoecological behaviour of belemnites and/or high‐frequency secular variations in sea‐water chemistry superimposed on the long‐term isotopic trend. A pronounced positive carbon‐isotope excursion (up to +4·3‰) is documented in the early Toarcian serpentinus biozone, which correlates with the Toarcian δ¹³C maximum reported in other European and Tethyan regions.     

开展矿区环境地质调查与评价为矿山环境保护提供科学依据

随着采矿业的发展,引起矿区地质环境的恶化,如地面形变,边坡失稳,地应力增高,水环境污染等。积极开展矿区环境地质调查与评价,查明现状,预测发展趋势,提出防治意见,从而达到合理开采利用矿产资源和保护地质环境的目的。     

Advancing tsunami risk assessment by improving spatio-temporal population exposure and evacuation modeling

Tsunamis are among the most destructive and lethal of coastal hazards. These are time-specific events, and despite directly affecting a narrow strip of coastline, a single occurrence can have devastating effects and cause massive loss of life, especially in urbanized coastal areas. In this work, in order to consider the time dependence of population exposure to tsunami threat, the variation of spatio-temporal population distribution in the daily cycle is mapped and analyzed in the Lisbon Metropolitan Area. High-resolution daytime and nighttime population distribution maps are developed using ‘intelligent dasymetric mapping,’ that is, applying areal interpolation to combine best-available census data and statistics with land use and land cover data. Workplace information and mobility statistics are considered for mapping daytime distribution. In combination with a tsunami hazard map, information on infrastructure, land use and terrain slope, the modeled population distribution is used to assess people’s evacuation speed, applying a geospatial evacuation modeling approach to the city of Lisbon. The detailed dynamic population exposure assessment allows producing both daytime and nighttime evacuation time maps, which provide valuable input for evacuation planning and management. Results show that a significant amount of population is at risk, and its numbers increase dramatically from nighttime to daytime, especially in the zones of high tsunami flooding susceptibility. Also, full evacuation can be problematic in the daytime period, even if initiated immediately after a major tsunami-triggering earthquake. The presented approach greatly improves tsunami risk assessment and can benefit all phases of the disaster management process.