The Balance Between Capturing Phosphorus from Manure and Wastewater and the Demand for Crop Fertilizer in Italy

Phosphorus (P) is an essential nutrient required for plant growth and at the same time a costly pollutant, which can cause eutrophication of water bodies. Modern agriculture relies heavily on mineral fertilisers, which contain phosphorus derived from phosphate rock, because, without regular applications, crop yields would be limited. Since phosphate rock is a non-renewable resource, there are growing concerns regarding future phosphorus scarcity and the sustainability of modern agriculture. For many farmers, animal manure was once a means of maintaining soil fertility, but now it presents a major operational problem. This study evaluated the possibility of recycling phosphorus on a national and regional scale in Italy, using major sources of manure and wastewater. These results were successively compared with an estimate of the agricultural demand for phosphorus. Considering the quantity of phosphorus fertilizer that was applied to the soil–plant system, for the years 2001–2010, the annual phosphorus requirement of Italian crops was about 101,000 t of P. Therefore, the phosphorus source comprising animal manure and civil/industrial waste (117,500 t of P and 40,000 t of P, respectively) could potentially satisfy the average annual agronomic phosphorus demand. Regarding the geographical distribution of phosphorus supply and demand on a regional scale, areas with a large deficit of phosphorus included Calabria, Puglia and Marche. However, when only livestock waste was considered, Sicily, Umbria and Friuli could also be considered to be regions experiencing a phosphorus deficit.

     

gLucifer: next generation visualization framework for high-performance computational geodynamics

High-performance computing provides unprecedented capabilities to produce higher resolution 4-D models in a fraction of time. Thus, the need exists for a new generation of visualization systems able to maintain parity with the enormous volume of data generated. In attempting to write this much data to disk, each computational step introduces a significant performance bottleneck, yet most existing visualization software packages inherently rely on reading data in from a dump file. Available packages make this assumption of postprocessing at quite a fundamental level and are not very well suited for plotting very large numbers of specialized particles. This necessitates the creation of a new visualization system that meets the needs of large-scale geodynamic modeling. We have developed such a system, gLucifer, using a software framework approach that allows efficient reuse of our efforts in other areas of research. gLucifer is capable of producing movies of a 4-D data set “on the fly” (simultaneously with running the parallel scientific application) without creating a performance bottleneck. By eliminating most of the human efforts involved in visualizing results through postprocessing, gLucifer reconnects the scientist to the numerical experiment as it unfolds. Data sets that were previously very difficult to even manage may be efficiently explored and interrogated without writing to disk, and because this approach is based entirely on memory distributed across as many processors as are being utilized by the scientific application, the visualization solution is scalable into terabytes of data being rendered in real time.     

Dolomitic marbles and associated calc-silicates, Tandilia belt, Argentina: Geothermobarometry, metamorphic evolution, and P–T path

The metamorphic evolution of dolomitic marbles and associated calc-silicate rocks from Punta Tota (NE Tandilia belt, Buenos Aires province, Argentina) has been evaluated through petrographic, geothermobarometric, and fluid inclusion studies. Thin beds of dolomitic marble are intercalated in amphibolites and constitute the upper part of a stratified basement sequence, which starts at the base with garnet migmatites showing a great abundance of pegmatitic segregates, overlain by biotite–garnet gneisses. Peak metamorphic conditions are estimated at 750–800 °C and 5–6 kb, followed by near isobaric cooling to about 500–450 °C and 5.5–6.5 kb. Anhydrous progressive metamorphic assemblages in both marbles (Fo + Cal + Dol + Cpx + Spl) and adjacent calc-silicate rocks (Cpx + An + Cal + Qtz) strongly retrogressed to hydrous minerals (Tr, Tlc, Grs, Czo, Srp) with decreasing temperatures and increasing water activities. The intense rehydration of the rocks relates to the emplacement of volatile-rich pegmatitic bodies (Qtz + Pl + Kfs + Bt + Grt), which also resulted in the crystallization of clinochlore + phlogopite in the marble and biotite + muscovite in the adjacent calc-silicate rocks. Metamorphic reactions based on textural relations and evaluated on a suitable petrogenetic grid, combined with geothermobarometric results and fluid inclusion isochores, indicate a metamorphic evolution along a counterclockwise P–T path. Two probable geotectonic settings for the determined P–T trajectory are proposed: (1) thinning of the crust and overlying supracrustal basin in an ensialic intraplate tectonic setting and (2) development of a marginal back-arc basin, associated with an oceanic–continental convergent plate margin. In both models, the initial extensional regime is followed by a compressional stage, with overthickening of the basement and supracrustal rocks, during the climax of the Transamazonian cycle at approximately 1800 Ma ago. Continuous convergence and blockage of structures produce transition to transcurrent tectonics (transpression) with a consequent moderate uplift.     

The Cathedral of S. Giorgio in Ragusa Ibla (Italy): characterization of construction materials and their chromatic alteration

The Cathedral of St. Giorgio in Ragusa Ibla (Sicily) is one of the most important Baroque monuments of eastern Sicily. The restoration of the monument underway has put forward notable questions regarding the stone materials used and their state of degradation. The façade appears to be made mainly of a creamy white calcarenite, and of mortars and plasters. However, detailed analysis has highlighted a more complex use of the raw material. The mortar and plaster have a different composition in regards to their architectural use while the natural stone material is distinguished not only by a creamy-white calcarenite but also by a dark coloured bituminous calcarenite (pitch rock), which now appears whiter because of superficial chromatic alterations. This process was reproduced in the laboratory using an accelerated aging technique on samples of bituminous calcarenite, which allowed the cause of the alternation to be identified as photo-oxidation of the asphaltenes. Following this process of photo-oxidation, other forms of chromatic alterations affected the façade (brown–orange-coloured patinas). FTIR, Scanning Electron Microscope and thin section microscopic observation allowed the characterization of also the products of this process to be carried out, highlighting the complex mechanism which the processes underwent.     

Francisco José de Caldas's Unaccomplished Life-Project – His Map Provincias Unidas de la Nueva Granada, 1811/ 1815

The first attempted republican map of present-day Colombia remained unachieved. Francisco José de Caldas worked on it since 1797 and, come the revolution and Nueva Granada's republican inception, he prepared two successive cartouches to introduce it: the first one in 1811, the latter in 1815. Finally entitled Provincias de la Nueva Granada, Caldas's map remains understudied. In this article, I establish its basic cartographic parameters, discuss the political context of its unfinished making and link it to its pertinent cartographic precedents.     

Mapping conservation priorities and connectivity pathways under climate change for tropical ecosystems

Climate change and land use conversion are global threats to biodiversity. Protected areas and biological corridors have been historically implemented as biodiversity conservation measures and suggested as tools within planning frameworks to respond to climate change. However, few applications to national protected areas systems considering climate change in tropical countries exist. Our goal is to define new priority areas for biodiversity conservation and biological corridors within an existing protected areas network. We aim at preserving samples of all biodiversity under climate change and facilitate species dispersal to reduce the vulnerability of biodiversity. The analysis was based on a three step strategy: i) protect representative samples of various levels of terrestrial biodiversity across protected area systems given future redistributions under climate change, ii) identify and protect areas with reduced climate velocities where populations could persist for relatively longer periods, and iii) ensure species dispersal between conservation areas through climatic connectivity pathways. The study was integrated into a participatory planning approach for biodiversity conservation in Costa Rica. Results showed that there should be an increase of 11 % and 5 % on new conservation areas and biological corridors respectively. Our approach integrates climate change into the design of a network of protected areas for tropical ecosystems and can be applied to other biodiversity rich areas to reduce the vulnerability of biodiversity to global warming.     

Recent trends in annual snowline variations in the northern wet outer tropics: case studies from southern Cordillera Blanca,Peru

TL-moments approach has been used in an analysis to identify the best-fitting distributions to represent the annual series of maximum streamflow data over seven stations in Johor, Malaysia. The TL-moments with different trimming values are used to estimate the parameter of the selected distributions namely: Three-parameter lognormal (LN3) and Pearson Type III (P3) distribution. The main objective of this study is to derive the TL-moments (t ₁,0), t ₁?=?1,2,3,4 methods for LN3 and P3 distributions. The performance of TL-moments (t ₁,0), t ₁?=?1,2,3,4 was compared with L-moments through Monte Carlo simulation and streamflow data over a station in Johor, Malaysia. The absolute error is used to test the influence of TL-moments methods on estimated probability distribution functions. From the cases in this study, the results show that TL-moments with four trimmed smallest values from the conceptual sample (TL-moments [4, 0]) of LN3 distribution was the most appropriate in most of the stations of the annual maximum streamflow series in Johor, Malaysia.     

A procedure to estimate the probability distribution of recurrence times in the west-northwestern Hellenic arc

The determination of the probability distribution of recurrence times is the most important problem in the calculation of long-term conditional probabilities for the recurrence of large and great earthquakes.The principle of maximum entropy in conjunction with a goodness-of-fit test (chi-square or Kolmogorov-Smirnov test) may be employed to obtain estimates of these densities using recurrence data for some seismic regions.Four different distributions are characterized by the property of maximum entropy, as possible laws for recurrence times of the largest earthquakes: uniform, exponential, Gaussian and log-normal. To discriminate among these different probability distributions we use the probability theory and the chi-square test to check the goodness-of-fit to the distribution of recurrence time of shocks of magnitude 6.5 and largest occurred in the west-northwestern zone of the Hellenic arc from 1791 to 1983.It is found that the recurrence times data for the west-northwestern zone of the Hellenic arc cannot be represented by the uniform and the Gaussian probability densities. The recurrence times data for the west-northwestern zone of the Hellenic arc can be described accurately by the exponential and log-normal probability densities, which were predicted from the principle of maximum entropy. In other words, the principle of maximum entropy does not necessarily lead to a unique solution. In turn, the mathematical properties of these distributions could be used to derive different physical properties of the earthquake process in the west-northwestern zone of the Hellenic arc.     

On the role of roughness lengths in flux parameterizations of boundary-layer models

Flux-profile relationships based on surface-layer similarity theory are used to derive relationships between the Monin-Obukhov stability parameter = z/L and the bulk Richardson number Ri _b . In contrast to previous studies, the roughness length for heat, z _0h ,is assumed unequal to the roughness length for momentum, z _0m .For the stable case, an analytic expression of in terms of Ri _b can be derived and in the unstable case, the solution is obtained through a simple iterative process.Errors introduced from the simplification of z _0h = z _0m are evaluated and are shown to be very significant in most cases. Thus, this error in many practical applications may invalidate the intended solution.