Anodic Oxidation as Green Alternative for Removing Diethyl Phthalate from Wastewater Using Pb/PbO2 and Ti/SnO2 Anodes

The electrochemical oxidation (EO) of diethyl phthalate (DEP) in aqueous solution was studied at Pb/PbO₂ and Ti/SnO₂ anode materials under galvanostatic‐experimental conditions. Results obtained clearly demonstrated that the anode plays a significant role for the optimization of the oxidation process, deciding the mechanisms and by‐products formed. DEP and by‐products of oxidation were also analyzed during various stages of the electrolysis reaction by HPLC and GC/MS techniques. Before the analysis by GC/MS technique, the samples were treated by solid phase microextraction (SPME) in order to concentrate the compounds from the reaction solution and identify all electrolysis intermediates. Current efficiencies (instantaneous current efficiency; ICE and total current efficiency; TCE) achieved during EO experiments were dependent on anode used and current density (20–40 mA cm^?2) at 40°C. The results obtained demonstrated that the environmental electrochemical methods can be a feasible alternative for the wastewater treatment containing hazardous phthalates.     

Subsurface thermal conductivity assessment in Calabria (southern Italy): a regional case study

Determining the suitability of a local area at a regional or local scale for the geothermal application of low enthalpy systems requires the knowledge of rock thermal conductivity values to evaluate the possibility of low-enthalpy heat exchange. A digital cartographic tool is also needed to synthesize the thermal properties of the underground. This tool should be easily accessible and upgradeable and thus suitable for territorial planning and environmental control. In order to address these key issues, a methodological approach was developed within the framework of the national VIGOR Project, dedicated to evaluating the geothermal potential in southern Italy. In this paper the region of Calabria was selected as a case study. Around 70 samples that were representative of the main geological formations were collected from all over the area. Thermal property tests were carried out both in dry and wet conditions, using a thermal device in accordance with the modified transient plane source method. The thermal conductivity values were then compared with data from the international literature. In order to consider the influence of the entire stratigraphic sequence on the thermal conductivity parameters, a geostatistical analysis of the available lithostratigraphic data was performed using the MATLAB toolbox Modalstrata, specially developed for this purpose. A comprehensive geothermal subsurface characterization of Calabria was thus obtained.     

Dolomitic marbles and associated calc-silicates, Tandilia belt, Argentina: Geothermobarometry, metamorphic evolution, and P–T path

The metamorphic evolution of dolomitic marbles and associated calc-silicate rocks from Punta Tota (NE Tandilia belt, Buenos Aires province, Argentina) has been evaluated through petrographic, geothermobarometric, and fluid inclusion studies. Thin beds of dolomitic marble are intercalated in amphibolites and constitute the upper part of a stratified basement sequence, which starts at the base with garnet migmatites showing a great abundance of pegmatitic segregates, overlain by biotite–garnet gneisses. Peak metamorphic conditions are estimated at 750–800 °C and 5–6 kb, followed by near isobaric cooling to about 500–450 °C and 5.5–6.5 kb. Anhydrous progressive metamorphic assemblages in both marbles (Fo + Cal + Dol + Cpx + Spl) and adjacent calc-silicate rocks (Cpx + An + Cal + Qtz) strongly retrogressed to hydrous minerals (Tr, Tlc, Grs, Czo, Srp) with decreasing temperatures and increasing water activities. The intense rehydration of the rocks relates to the emplacement of volatile-rich pegmatitic bodies (Qtz + Pl + Kfs + Bt + Grt), which also resulted in the crystallization of clinochlore + phlogopite in the marble and biotite + muscovite in the adjacent calc-silicate rocks. Metamorphic reactions based on textural relations and evaluated on a suitable petrogenetic grid, combined with geothermobarometric results and fluid inclusion isochores, indicate a metamorphic evolution along a counterclockwise P–T path. Two probable geotectonic settings for the determined P–T trajectory are proposed: (1) thinning of the crust and overlying supracrustal basin in an ensialic intraplate tectonic setting and (2) development of a marginal back-arc basin, associated with an oceanic–continental convergent plate margin. In both models, the initial extensional regime is followed by a compressional stage, with overthickening of the basement and supracrustal rocks, during the climax of the Transamazonian cycle at approximately 1800 Ma ago. Continuous convergence and blockage of structures produce transition to transcurrent tectonics (transpression) with a consequent moderate uplift.     

Weakening of gneiss surfaces colonized by endolithic lichens in the temperate climate area of northwest Italy

A role of lithobionts in geomorphological processes is increasingly argued, but the spatio‐temporal scale of their impact is largely unexplored in many ecosystems. This study first characterizes in the temperate zone (northwest Italy) the relationships between lithobiontic communities including endolithic lichens and the hardness of their siliceous rock substrate (Villarfocchiardo Gneiss). The communities are characterized, on humid and xeric quarry surfaces exposed for decades and natural outcrops exposed for centuries, in terms of lichen and microbial constituents, using a combined morphological and molecular approach, and with regard to their development on and within the gneiss. A lichen species belonging to Acarosporaceae (Polysporina‐Sarcogyne‐Acarospora group, needing taxonomic revision) chasmoendolithically colonizes both the humid and xeric quarry surfaces, on which epilithic cyanobacterial biofilms and epilithic pioneer lichens respectively occur. Light and electron microscopic observations show the development of the endolithic thalli within rock microcracks and the hyphal penetration along crystal boundaries down to depths of 1 to 3 mm, more pronounced within the humid surfaces. Such colonization patterns are likely related to biogeophysical deterioration, while no chemical alteration characterizes minerals contacted by the endolithic lichen. By contrast, on natural outcrops, where the endolithic colonization is negligible, a reddish rind below epilithic lichens indicates chemical weathering processes. Schmidt Hammer measurements highlight that the endolithic lichens deeply affect the hardness of the gneiss (down to ?60% with respect to fresh controls and surfaces only colonized by cyanobacteria), exerting a significantly higher weakening effect with respect to the associated epilithic lithobionts. The phenomenon is more remarkable on humid than on xeric quarry surfaces and natural outcrops, where epilithic lichens are likely involved in long‐term hardening processes supporting surface stabilization. Endolithic lichens are thus active biogeomorphological agents at the upper millimetric layer of siliceous rocks in temperate areas, exerting their weakening action during the early decade‐scaled stages of surface exposure. Copyright © 2015 John Wiley & Sons, Ltd.     

Microdeformation of lacustrine laminite sequences from Late Miocene formations of SE Spain: an interpretation of loop bedding

Lacustrine laminated sediments (laminites) present in Late Miocene formations of the Híjar Basin, SE Spain, display well developed loop bedding, a structure consisting of bundles of laminae that are sharply constricted at intervals, giving a morphology of loops or links of a chain. The laminite sequences, which are interbedded with turbidite marlstones, were accumulated on the bottom of a permanently stratified lake developed in a rapidly subsiding basin limited by 010° and 105° normal faults. As deduced from both macro- and microdeformational analyses, the basin evolved under an extensional stress field throughout the Late Miocene. Four main types of loops, simple and complex loops with subcategories, have been recognized within the laminite sequence. Simple loops of type 1 show the best definite pattern, quite similar to ' pinch and swell structures ', a type of boudinage typical of stretching of alternating beds where the competence contrast is not strongly marked. The remaining loop types display contortion and occasional breakage of laminae (microfaulted edges) indicative of microdeformation near the boundary between the ductile-brittle deformational fields. The distribution of the various loop types across the laminite sequence reflects an interplay between progressive lithification of the laminites as sedimentation progressed and tectonic stresses which affected the sediment sequence. Accordingly, a mechanism of deformation under an extensional stress field, ultimately related to the creep movement of the main basin faults which resulted in successive seismic shocks of low magnitude, is proposed to explain the formation of loop bedding in the laminites.     

Solar-Terrestrial Signal Record in Tree Ring Width Time Series from Brazil

This work investigates the behavior of the sunspot number and Southern Oscillation Index (SOI) signal recorded in the tree ring time series for three different locations in Brazil: Humaitá in Amaz?nia State, Porto Ferreira in S?o Paulo State, and Passo Fundo in Rio Grande do Sul State, using wavelet and cross-wavelet analysis techniques. The wavelet spectra of tree ring time series showed signs of 11 and 22?years, possibly related to the solar activity, and periods of 2–8?years, possibly related to El Ni?o events. The cross-wavelet spectra for all tree ring time series from Brazil present a significant response to the 11-year solar cycle in the time interval between 1921 to after 1981. These tree ring time series still have a response to the second harmonic of the solar cycle (5.5?years), but in different time intervals. The cross-wavelet maps also showed that the relationship between the SOI x tree ring time series is more intense, for oscillation in the range of 4–8?years.     

Temperature trends in Libya over the second half of the 20th century

This paper investigates spatial variability of temperature trends over Libya in the second half of the 20th century. The study is based on complete and homogeneous time series of minimum, maximum, and mean temperature for ten observatories. During the investigated period (1951–1999), temperature trend analyses have experienced a downward trend in the maximum surface temperature (about –0.06°C decade^–1) and an upward trend in the minimum surface temperature (about 0.23°C decade^–1). Cooling tendency in maximum temperature is spatially more pronounced in inland stations compared to coastal stations. At the seasonal scale, maximum temperature cooling is more obvious in winter and spring, meanwhile minimum temperature warming is more pronounced in summer and fall. In accordance with global trends, the surface mean temperature has moderately risen at an average rate of 0.09°C decade^–1. However, this trend has shown considerable temporal variability considering a more pronounced upward trend in summer and fall. In conjunction with other regional and global investigations, clear trends towards smaller diurnal range are presented (–0.28°C decade^–1).     

A microslip model for the seismic response analysis of drained cohesionless soil deposits

Constitutive equations for drained cohesionless soils under triaxial stress states, based on a microslip model with internal friction, are proposed and applied to the analysis of the seismic response of soil deposits. The microslips, assumed localized in the discontinuity surfaces passing through the particle-to-particle contacts, describe the effects of the sliding and rolling between grains of sand. Once the response of the model under cyclic shearing stresses and strains superimposed on the geostatic stress state has been analysed, the constitutive equations are applied to a one-dimensional shear model for the dynamic analysis of the layered deposits. An application to an instrumented soil deposit is then developed, the experimental results of which refer to both strong and weak motion earthquakes; the comparisons between the experimental and theoretical results point out the peculiarities and validity limits of the model. The model here developed may be applied also to the analysis of two- and three-dimensional sites.