Hierarchical probabilistic regionalization of volcanism for Sengan region,Japan

A 1 km square regular grid system created on the Universal Transverse Mercator zone 54 projected coordinate system is used to work with volcanism related data for Sengan region. The following geologic variables were determined as the most important for identifying volcanism: geothermal gradient, groundwater temperature, heat discharge, groundwater pH value, presence of volcanic rocks and presence of hydrothermal alteration. Data available for each of these important geologic variables were used to perform directional variogram modeling and kriging to estimate geologic variable vectors at each of the 23949 centers of the chosen 1 km cell grid system. Cluster analysis was performed on the 23949 complete variable vectors to classify each center of 1 km cell into one of five different statistically homogeneous groups with respect to potential volcanism spanning from lowest possible volcanism to highest possible volcanism with increasing group number. A discriminant analysis incorporating Bayes’ theorem was performed to construct maps showing the probability of group membership for each of the volcanism groups. The said maps showed good comparisons with the recorded locations of volcanism within the Sengan region. No volcanic data were found to exist in the group 1 region. The high probability areas within group 1 have the chance of being the no volcanism region. Entropy of classification is calculated to assess the uncertainty of the allocation process of each 1 km cell center location based on the calculated probabilities. The recorded volcanism data are also plotted on the entropy map to examine the uncertainty level of the estimations at the locations where volcanism exists. The volcanic data cell locations that are in the high volcanism regions (groups 4 and 5) showed relatively low mapping estimation uncertainty. On the other hand, the volcanic data cell locations that are in the low volcanism region (group 2) showed relatively high mapping estimation uncertainty. The volcanic data cell locations that are in the medium volcanism region (group 3) showed relatively moderate mapping estimation uncertainty. Areas of high uncertainty provide locations where additional site characterization resources can be spent most effectively. The new data collected can be added to the existing database to perform future regionalized mapping and reduce the uncertainty level of the existing estimations.     

Factors governing subaqueous siliceous sinter precipitation in hot springs: examples from Yellowstone National Park, USA

Abstract Siliceous sinter precipitation within hot spring systems has been attributed to a variety of mechanisms: evaporative concentration, cooling, changes in pH and cation effects. Repetitive in situ (T, pH, alkalinity, etc.) and laboratory (major, minor and trace elemental, stable isotopic) analyses of the waters plus observations of silica precipitation on natural (e.g. twigs, pine cones) as well as artificial substrates (glass slides and copper plates) in the waters substantiate that subaqueous precipitation is occurring throughout the vent to distal end of flow in both Cistern Spring (Norris Geyser Basin) and Deerbone Spring (Lower Geyser Basin), Yellowstone National Park, Wyoming, USA. Quartz and sodium–potassium geothermometers indicate that Cistern Spring is fed by a subsurface reservoir that is between 232 and 272 °C. Calculated reservoir temperatures are significantly lower at Deerbone Spring (182–197 °C). Based on a suite of measured and theoretical saturation indices, downflow changes in the system resulting from evaporative concentration (e.g. Cl increases 10%), changes in pH (e.g. 5·6–7·1) and cation effects (Al and Fe) are of negligible importance in the subaqueous precipitation of hot spring opal‐A. Similarly, at the macroenvironmental scale, potential biotic effects on opal‐A precipitation appear to be minimal. Modelling of the two active siliceous sinter precipitating systems indicates that cooling (e.g. 80–17 °C) is the predominant process governing subaqueous mineral precipitation.     

Regional Correspondence in Habitat Occupancy by Gray Snapper (Lutjanus griseus) in Estuaries of the Southeastern United States

Reef fishes, such as gray snapper, support important recreational and commercial fisheries and use a variety of habitats throughout ontogeny. Gray snapper juveniles may be found in estuarine nursery areas, such as seagrass beds, or mangrove shorelines, while adults are most often found in deep channels and farther offshore, associated with hard-bottom habitats. Juvenile and subadult gray snapper were collected from 1996 through 2009 during long-term fishery-independent monitoring of several estuarine systems along the Gulf and Atlantic coasts of Florida. Indices of abundance and habitat suitability were constructed for gray snapper to determine size-specific relationships between abundance, habitat, and environmental conditions. Juvenile and subadult gray snapper were collected year-round only in the southernmost estuaries but were most common from July through December in all estuaries sampled. In addition to timing of estuarine occupancy, abundance varied with latitude; gray snapper were more frequently collected in warmer, southern estuaries. In general, gray snapper were most abundant in euhaline areas with a high percentage of submerged aquatic vegetation (SAV) and, in most cases, where overhanging shoreline vegetation was also present. Annual abundance varied over the sampling period, with some juvenile peaks in abundance translating to subadult peaks in subsequent years. Although strong correspondence between juvenile and subadult populations was not observed in all systems, long-term, broad-scale habitat selection patterns as described in this study are critical to more effectively assess populations of estuarine-dependent species.     

Rapid climate change in the Upper Palaeolithic: the record of charcoal conifer rings from the Gravettian site of Dolní Vĕstonice,Czech Republic

Precisely how Upper Palaeolithic human ecology was shaped by changing climate during the Pleniglacial remains a matter of debate, for while this generally cold period is now understood to include complex and often rapid flux in climate, there are still considerable difficulties in resolving climatic variations at particular times and places — derived from various lines of proxy evidence — with the high-resolution proxy record of temperature changes from oxygen isotope analysis of the Greenland ice-cores.In this paper we apply the methodology of large-scale flotation to newly excavated contexts from the Upper Palaeolithic (Gravettian) site of Dolní V?stonice II, Czech Republic, to explore the potential of charcoal — as a natural archive of environmental information — to offer information on environmental change towards the end of the middle pleniglacial during Oxygen Isotope Stage 3, between c. 32,500 and 31,200 Cal yr BP. The results of an analysis of ring widths and other anatomical features — interpreted alongside micromorphological data — indicate that this charcoal may capture a higher-resolution record of the changing climatic conditions during which humans were first expanding into these hitherto marginal ecologies and, consequently, shed new light upon the complexity of the lifeways that enabled them to do so.     

Novel basin modelling concept for simulating deformation from mechanical compaction using level sets

As sedimentation progresses in the formation and evolution of a depositional geologic basin, the rock strata are subject to various stresses. With increasing lithostatic pressure, compressional forces act to compact the porous rock matrix, leading to overpressure buildup, changes in the fluid pore pressure and fluid flow. In the context of petroleum systems modelling, the present study concerns the geometry changes that a compacting basin experiences subject to deposition. The purpose is to track the positions of the rock layer interfaces as compaction occurs. To handle the challenge of potentially large geometry deformations, a new modelling concept is proposed that couples the pore pressure equation with a level set method to determine the movement of lithostratigraphic interfaces. The level set method propagates an interface according to a prescribed speed. The coupling term for the pore pressure and level-set equations consists of this speed function, which is dependent on the compaction law. The two primary features of this approach are the simplicity of the grid and the flexibility of the speed function. A first evaluation of the model concept is presented based on an implementation for one spatial dimension accounting for vertical effective stress. Isothermal conditions with a constant fluid density and viscosity were assumed. The accuracy of the implemented numerical solution for the case of a single stratigraphic unit with a linear compaction law was compared to the available analytical solution [38]. The multi-layer setup and the nonlinear case were tested for plausibility.     

Constraining pathways of microbial mediation for carbonate concretions of the Miocene Monterey Formation using carbonate-associated sulfate

Carbonate concretions can form as a result of organic matter degradation within sediments. However, the ability to determine specific processes and timing relationships to particular concretions has remained elusive. Previously employed proxies (e.g., carbon and oxygen isotopes) cannot uniquely distinguish among diagenetic alkalinity sources generated by microbial oxidation of organic matter using oxygen, nitrate, metal oxides, and sulfate as electron acceptors, in addition to degradation by thermal decarboxylation. Here, we employ concentrations of carbonate-associated sulfate (CAS) and δ³⁴S_CAS (along with more traditional approaches) to determine the specific nature of concretion authigenesis within the Miocene Monterey Formation.Integrated geochemical analyses reveal that at least three specific organo-diagenetic reaction pathways can be tied to concretion formation and that these reactions are largely sample-site specific. One calcitic concretion from the Phosphatic Shale Member at Naples Beach yields δ³⁴S_CAS values near Miocene seawater sulfate (～+22‰ VCDT), abundant CAS (ca. 1000 ppm), depleted δ¹³C_carb (～?11‰ VPDB), and very low concentrations of Fe (ca. 700 ppm) and Mn (ca. 15 ppm)—characteristics most consistent with shallow formation in association with organic matter degradation by nitrate, iron-oxides and/or minor sulfate reduction. Cemented concretionary layers of the Phosphatic Shale Member at Shell Beach display elevated δ³⁴S_CAS (up to ～+37‰), CAS concentrations of ～600 ppm, mildly depleted δ¹³C_carb (～?6‰), moderate amounts of Mn (ca. 250 ppm), and relatively low Fe (ca. 1700 ppm), indicative of formation in sediments dominated by sulfate reduction. Finally, concretions within a siliceous host at Montaña de Oro and Naples Beach show minimal CAS concentrations, positive δ¹³C values, and the highest concentrations of Fe (ca. 11,300 ppm) and Mn (ca. 440 ppm), consistent with formation in sediments experiencing methanogenesis in a highly reducing environment. This study highlights the promise in combining CAS analysis with more traditional techniques to differentiate among diagenetic reactions as preserved in the geologic record and shows potential for unraveling subsurface biospheric processes in ancient samples with a high degree of specificity.     

Melting phase relations of a mica–clinopyroxenite from the Milk River area, southern Alberta, Canada

Melting experiments were conducted on a mica–clinopyroxenite xenolith brought up in a minette dyke in southern Alberta, Canada, near Milk River. Both the minettes and mica–clinopyroxenite xenoliths were studied by Buhlmann et al. (Can J Earth Sci 37:1629–1650, 2000), who hypothesized that the minettes formed by partial melting of a mantle source containing clinopyroxene + phlogopite ± olivine, at pressures ≥1.7 GPa. In liquidus experiments performed on the most primitive minette in our previous study (Funk and Luth in Contrib Mineral Petrol 164:999–1009, 2012), we found a multiple saturation point where olivine and orthopyroxene coexisted with liquid at 1.77 GPa and 1,350 °C. We argued that the minette originally formed by partial melting of clinopyroxene + phlogopite, but had re-equilibrated with a harzburgite during ascent. In the current study, we wanted to test both the source region hypothesis of Buhlmann et al. and our re-equilibration hypothesis by studying the near-solidus phase equilibria of a mica + clinopyroxene assemblage. We found the solidus for our xenolith has a steep slope in P–T space and lies at temperatures above those of a normal cratonic geotherm, implying that this mica–clinopyroxenite is stable in the cratonic mantle. Melting could occur at greater depths, where the solidus is extrapolated to cross the geotherm or must be induced either by raising the temperatures of the surrounding rocks or by introducing hydrous fluids into the source. Our melts are in equilibrium with clinopyroxene and olivine. The compositions of the liquids derived from melting this xenolith are similar to madupitic lamproites from the Leucite Hills, Wyoming, studied by Carmichael (Contrib Mineral Petrol 15:24–66, 1967) and Barton and Hamilton (Contrib Mineral Petrol 66:41–49, 1978; Contrib Mineral Petrol 69:133–142, 1979). Barton and Hamilton (Contrib Mineral Petrol 69:133–142, 1979) proposed that the madupitic lamproites may have come from a source containing mica and pyroxene. This study supports their hypothesis. The composition of the most primitive minette from southern Alberta lies between our experimental melt and a population of representative mantle orthopyroxenes. We conclude from our study that the Milk River minettes were likely derived from a source containing phlogopite, clinopyroxene and trace amounts of apatite, which formed olivine upon melting. During ascent, the melts changed composition by reacting with orthopyroxene.     

Regime-dependent streamflow sensitivities to Pacific climate modes cross the Georgia–Puget transboundary ecoregion

The Georgia Basin–Puget Sound Lowland region of British Columbia (Canada) and Washington State (USA) presents a crucial test in environmental management due to its combination of abundant salmonid habitat, rapid population growth and urbanization, and multiple national jurisdictions. It is also hydrologically complex and heterogeneous, containing at least three streamflow regimes: pluvial (rainfall-driven winter freshet), nival (melt-driven summer freshet), and hybrid (both winter and summer freshets), reflecting differing elevation ranges within various watersheds. We performed bootstrapped composite analyses of river discharge, air temperature, and precipitation data to assess El Niño–Southern Oscillation (ENSO) and Pacific Decadal Oscillation (PDO) impacts upon annual hydrometeorological cycles across the study area. Canadian and American data were employed from a total of 21 hydrometric and four meteorological stations. The surface meteorological anomalies showed strong regional coherence. In contrast, the seasonal impacts of coherent modes of Pacific circulation variability were found to be fundamentally different between streamflow regimes. Thus, ENSO and PDO effects can vary from one stream to the next within this region, albeit in a systematic way. Furthermore, watershed glacial cover appeared to complicate such relationships locally; and an additional annual streamflow regime was identified that exhibits climatically driven non-linear phase transitions. The spatial heterogeneity of seasonal flow responses to climatic variability may have substantial implications to catchment-specific management and planning of water resources and hydroelectric power generation, and it may also have ecological consequences due to the matching or phase-locking of lotic and riparian biological activity and life cycles to the seasonal cycle. The results add to a growing body of literature suggesting that assessments of the streamflow impacts of ocean–atmosphere circulation modes must accommodate local hydrological characteristics and dynamics. Copyright © 2007 John Wiley & Sons, Ltd. The copyright in Paul H. Whitfield's contribution belongs to the Crown in right of Canada and such copyright material is reproduced with the permission of Environment Canada.     

Reprocessed emission line profiles from dense clouds in geometrically thick accretion engines

The central engines of active galactic nuclei (AGN) contain cold, dense material as well as hot X-ray-emitting gas. The standard paradigm for the engine geometry is a cold thin disc sandwiched between hot X-ray coronae. Strong support for this geometry in Seyferts comes from the study of fluorescent iron line profiles, although the evidence is not ubiquitously airtight. The thin disc model of line profiles in AGN and in X-ray binaries should still be benchmarked against other plausible possibilities. One proposed alternative is an engine consisting of dense clouds embedded in an optically thin, geometrically thick X-ray-emitting engine. This model is also motivated by studies of geometrically thick engines such as advection-dominated accretion flows (ADAFs). Here we compute the reprocessed iron line profiles from dense clouds embedded in geometrically thick, optically thin X-ray-emitting discs near a Schwarzschild black hole. We consider a range of cloud distributions and disc solutions, including ADAFs, pure radial infall and bipolar outflows. We find that such models can reproduce line profiles similar to those from geometrically thin, optically thick discs and might help alleviate some of the problems encountered from the latter. Thus, independent of thin discs, thick disc engines can also exhibit iron line profiles if embedded dense clouds can survive long enough to reprocess radiation.