Constitutive approach for rate‐sensitive anisotropic structured clays

This paper describes a constitutive approach to model the behavior of rate‐dependent anisotropic structured clay. Rate‐sensitivity is modeled using overstress viscoplasticity. Clay structure is treated as a viscous phenomenon whereby the viscosity of the undisturbed structured clay is initially very high and the viscosity degrades or decreases with plastic straining until the intrinsic or residual viscosity is reached. A microstructure tensor approach is used to make the structured viscosity anisotropic; whereas, the intrinsic viscosity is assumed to be isotropic. The behavior of the constitutive model is compared with the measured response of two clays (Gloucester and St. Vallier clay) from Eastern Canada during triaxial compression tests on specimens trimmed at different orientations to the vertical. The comparisons show that the constitutive framework is able to describe the anisotropic and rate‐sensitive response of both clays. The response of the model is also examined for the more general case of anisotropic consolidated triaxial compression and extension. Copyright © 2010 John Wiley & Sons, Ltd.     

Water chemistry and sedimentological observations in littlefield lake,michigan: Implications for lacustrine marl deposition

A combination of both water chemistry and sedimentological information was used to investigate the carbonate-producing mechanism in Littlefield Lake, a small lake located in Isabella County, central Michigan. Data on temperature, dissolved oxygen, pH, calcium carbonate (CaCO₃) saturation, alkalinity, calcium, and magnesium were obtained on a monthly basis over a 13-month period, with each parameter determined at 1m intervals over a depth range of 20m. The loss of dissolved carbon dioxide (CO₂) from warm surface waters during direct degassing, and to a lesser extent during photosynthetic uptake by lacustrine macrophytes and phytoplankton during the summer, results in massive precipitation of the low-magnesium calcite which predominates in all Littlefield Lake sedimentary facies However, despite the fact that carbonate precipitation in this rather typical temperate-region marl lake is directly related to, and may be driven by, seasonal variation in these physiochemical parameters, most calcite forms as encrustations around cyanophytic and chlorophytic macrophytes. Such relationships demonstrate that carbonate precipitation in marl lakes may result from complex interactions between both biochemical and physiochemical processes. As such, marl formation in this, and probably many other calcareous lake systems, can not be simply ascribed to one or the other of these two general mechanisms.     

The genesis of mid-ocean ridge basalt

The tholeiitic volcanics erupted at mid-ocean ridges (mid-ocean ridge basalts or MORB) constitute the dominant volcanic lithology on Earth. Analyses of tachylites from Atlantic, Pacific and Indian Ocean spreading centres range widely in 100 Mg/(Mg + Fe²⁺) ratios (= M) and M varies from 70 to 30. Glasses with M = 55?65 are the most common variants and only a small percentage of glass analyses has M approaching 70. The latter defines the M -value of basaltic melts in equilibrium with residual upper-mantle source peridotites with M ～ 88. The frequency histogram of the M -values of average compositions of MORB glasses at 88 ocean floor localities is similar in analysis distribution to the frequency histograms depicting variation in the M -values of glasses from the various spreading centres.M -values and nickel contents of MORB and the nature and compositions of the near-liquidus phases crystallized experimentally from MORB melts at elevated pressures have been applied to identify primary (unfractionated) melts erupted in a mid-ocean ridge environment. However, Ni abundances and high-pressure phase relationships are not necessarily unique or definitive parameters of primary melts. The latter are generally linked genetically with Mg-rich lherzolitic source rocks of ‘pyrolite’ type (M ～ 90. The spectrum of M -values displayed by MORB glasses, with a definite bias towards relatively Fe-rich compositions (average M of approximately 600 MORB glasses is 58.6), suggests that the melts may have evolved either via ferromagnesian fractionation of relatively Mg-rich parental melts (M = 70?80), or by partial melting of a heterogeneous upper mantle with variable M values, or as a result of magma mixing of already fractionated melts and primitive magma batches.For a number of reasons fractonation models based on the extraction of olivine or one or more of olivine, plagioclase and clinopyroxene, either from picritic melts (M > 75 or ‘primitive’ basaltic melts with M ～ 70, are questionable as prime controls of MORB chemistry. These include: (1) the extreme rarity of ‘quenched’ picritic or Mg-basaltic melts in ocean ridge environments; (2) the lack of adequate evidence of the appropriate (of necessity voluminous) complementary cumulates (dunites, allivalites, troctolites, anorthosites) demanded by olivine, plagioclase, or olivine + plagioclase fractionation models; and (3) the aberrent frequencies of glass M -values whereby the assumed derivatives (M = 55?65 are much more abundant (and presumably much more voluminous) than the alleged parents or transitional derivatives (65 < M < 75). The nature of the trends of Na₂O, CaO and Al₂O₃ in Galapagos Spreading Centre tachylites of extended composition (M = 65?30) indicates the ‘gabbroic’ fractionation is also unlikely to exert important controls on MORB chemistry.As their M -values increase, mid-ocean ridge basalts increase in Al, Ca, Ni, Co, Cr and decrease in Ti, Mn, Na, K and P. Except for Al and Ca, these trends are similar to those displayed by upper-mantle peridotites increasing in M, i.e., becoming more refractory following one or more partial melting episodes. It is suggested that at least a majority of mid-ocean ridge basalts is intrinsically primary and generated by variable degrees of partial melting of heterogeneous lherzolitic upper mantle (80 < M < 90) with variable abundances of elements such as Ti, Al, Ca and Na and also depleted in large ion lithophile (LIL) elements. Negative europium anomalies in the rare-earth patterns of some oceanridge basalts (ferrobasalts with low M) are ascribed mainly to the persistence of residual plagioclase in relatively Fe-rich plagioclase lherzolite source rocks, following low degrees of partial melting. The partial melting events leading to the generation of mid-ocean ridge basalts took place over a relatively modes pressure range (approximately 8–15 kb) which encompassed the transition of plagioclase lherzolite to spinel lherzolite. This proposal appears consistent with the nature and occurrence of megacrysts (xenocrysts) of tschermakitic Cr-diopside (Ca₄₃Mg₅₂Fe₅), olivine (mg 89–91), plagioclase (An_92-85) and spinel (Fe₂Al₆₀Cr₃₈) in some MORB. The megacryst compositions suggest that these phases represent disaggregated plagioclase peridotite or spinel lherzolite acquired by melts during their passage through the oceanic upper mantle.     

Contemporary versus long‐term denudation along a passive plate margin: the role of extreme events

Short‐term (contemporary) and long‐term denudation rates were determined for the Blue Mountains Plateau in the western Sydney Basin, Australia, to explore the role of extreme events (wildfires and catastrophic floods) in landscape denudation along a passive plate margin. Contemporary denudation rates were reconstructed using 40 years of river sediment load data from the Nattai catchment in the south‐west of the basin, combined with an analysis of hillslope erosion following recent wildfires. Long‐term denudation rates (10 kyr–10 Myr) were determined from terrestrial cosmogenic nuclides, apatite fission track thermochronology and post‐basalt flow valley incision. Contemporary denudation rates average several times lower than the long‐term average (5·5 ± 4 mm kyr^?1 versus 21·5 ± 7 mm kyr^?1). Erosion of sediment following wildfires accounts for only a small proportion (5%) of the contemporary rate. Most post‐fire sediment is stored on the lower slopes and valley floor, with the amount transported to the river network dependent on rainfall–run‐off conditions within the first few years following the fire. Historical catastrophic floods account for a much larger proportion (35%) of the contemporary erosion rate, and highlight the importance of these events in reworking stored material. Evidence for palaeofloods much larger than those experienced over the past 200 years suggests even greater sediment export potential. Mass movement on hillslopes along valleys incised into softer lithology appears to be a dominant erosion process that supplies substantial volumes of material to the valley floor. It is possible that a combination of infrequent mass movement events and high fluvial discharge could account for a significant proportion of the discrepancy between the contemporary and long‐term denudation rates. Copyright © 2006 John Wiley & Sons, Ltd.     

Application of GIS Processing Techniques for Producing Mineral Prospectivity Maps—A Case Study: Mesothermal Au in the Swayze Greenstone Belt,Ontario, Canada

A Geographic Information System (GIS) is used to prepare and process digital geoscience data in a variety of ways for producing gold prospectivity maps of the Swayze greenstone belt, Ontario, Canada. Data used to produce these maps include geologic, geochemical, geophysical, and remotely sensed (Landsat). A number of modeling methods are used and are grouped into data-driven (weights of evidence, logistic regression) and knowledge-driven (index and Boolean overlay) methods. The weights of evidence (WofE) technique compares the spatial association of known gold prospects with various indicators (evidence maps) of gold mineralization, to derive a set of weights used to produce the final gold prospectivity map. Logistic regression derives statistical information from evidence maps over each known gold prospect and the coefficients derived from regression analysis are used to weight each evidence map. The gold prospectivity map produced from the index overlay process uses a weighting scheme that is derived from input by the geologist, whereas the Boolean method uses equally weighted binary evidence maps.The resultant gold prospectivity maps are somewhat different in this study as the data comprising the evidence maps were processed purposely differently for each modeling method. Several areas of high gold potential, some of which are coincident with known gold prospects, are evident on the gold prospectivity maps produced using all modeling methods. The majority of these occur in mafic rocks within high strain zones, which is typical of many Archean greenstone belts.     

Complexity in astroplasmas

Ideas of complexity theory – including self-organized criticality – are being applied to the study of turbulence and astroplasmas in the solar system. An RAS MIST meeting in London brought together researchers from different disciplines to compare established paradigms with more recent ideas. Sandra Chapman , Mervyn Freeman and Sean Oughton report.     

Distorted Froude‐scaled flume analysis of large woody debris

This paper presents the results of a movable‐boundary, distorted, Froude‐scaled hydraulic model based on Abiaca Creek, a sand‐bedded channel in northern Mississippi. The model was used to examine the geomorphic and hydraulic impact of simplified large woody debris (LWD) elements. The theory of physical scale models is discussed and the method used to construct the LWD test channel is developed. The channel model had bed and banks moulded from 0·8 mm sand, and flow conditions were just below the threshold of motion so that any sediment transport and channel adjustment were the result of the debris element. Dimensions and positions of LWD elements were determined using a debris jam classification model. Elements were attached to a dynamometer to measure element drag forces, and channel adjustment was determined through detailed topographic surveys. The fluid drag force on the elements decreased asymptotically over time as the channel boundary eroded around the elements due to locally increased boundary shear stress. Total time for geomorphic adjustment computed for the prototype channel at the Q₂ discharge (discharge occurring once every two years on average) was as short as 45 hours. The size, depth and position of scour holes, bank erosion and bars created by flow acceleration past the elements were found to be related to element length and position within the channel cross‐section. Morphologies created by each debris element in the model channel were comparable with similar jams observed in the prototype channel. Published in 2001 John Wiley & Sons, Ltd.     

Global climatic change,hurricanes, and a tropical forest

Most, if not all forests in the Caribbean are subject to occasional disturbances from hurricanes. If current general circulation model (GCM) predictions are correct, with doubled atmospheric CO₂ (2 × CO₂), the tropical Atlantic will be between 1 °C and 4 °C warmer than it is today. With such a warming, more than twice as many hurricanes per year could be expected in the Caribbean. Furthermore, Emanuael (1987) indicates that in a warmed world the destructive potential of Atlantic hurricanes could be increased by 40% to 60%. While speculative, these increases would dramatically change the disturbance regimes affecting tropical forests in the region and might alter forest structure and composition. Global warming impacts through increased hurricane damage on Caribbean forests are presented.An individual tree, gap dynamics forest ecosystem model was used to simulate the range of possible hurricane disturbance regimes which could affect the Luquillo Experimental Forest in Puerto Rico. Model storm frequency ranged from no storms at all up to one storm per year; model storm intensity varied from no damage up to 100% mortality of trees. The model does not consider the effects of changing temperature and rainfall patterns on the forest. Simulation results indicate that with the different hurricane regimes a range of forest types are possible, ranging from mature forest with large trees, to an area in which forest trees are never allowed to reach maturity.