Earth observations during space shuttle flight STS‐41: Discovery's mission to planet earth

Abstract

Multi‐temporal ERS‐1 SAR data acquired over a large agricultural region in West Bengal was used to classify kharif crops like rice, jute and sugarcane. Rice crop grown under lowland management practice showed a temporal characteristic. The dynamic range of backscatter was highest for this crop in temporal SAR data. This was used to classify rice using temporal SAR data. Such temporal character was not observed for the other study crops, which may be due to the difference in cultivation practice and crop calendar. Significant increase in backscatter from the ploughed fields was used to derive information on onset and duration of land preparations. Synergistic use of optical remote sensing data and SAR data increased the separability of rice crop from homesteads and permanent vegetation classes.     

An experimental study of a minette from the Milk River area, southern Alberta, Canada

Buhlmann et al. (Can J Earth Sci 37: 1629–1650, 2000) studied the minettes and xenoliths from the Milk River area of southern Alberta, Canada. Based on previous work, they hypothesized that the minettes were derived from a source containing phlogopite?+?clinopyroxene?±?olivine, at pressures ≥1.7?GPa. To test this hypothesis, liquidus experiments were performed on a primitive minette between 1.33 and 2.21?GPa and between 1,300 and 1,400?°C to constrain the mineralogy of its source region. We found a multiple saturation point along the liquidus at 1.77 GPa and 1,350?°C, where the liquid coexists with orthopyroxene and olivine. Neither phlogopite nor clinopyroxene were found to be liquidus phases, which is inconsistent with Buhlmann et al.’s hypothesis. We suggest that our minette is not primary, but had re-equilibrated with harzburgitic mantle subsequent to formation. In such a scenario, partial melting of a veined source containing mica and clinopyroxene occurred at or near the base of the Wyoming craton (~200?km). Minimal heating or the introduction of hydrous fluids into the source would be required to induce partial melting. Rapid ascent rates, coupled with slow cooling rates, of the “primary minette magma” would preserve the high temperature observed in our experiments. At ~58?km, our “primary minette magma” likely stalled and re-equilibrated with the harzburgite surroundings.     

First record of the Australian ascidian Eudistoma elongatum in northern New Zealand

A colonial ascidian was first reported by marine farmers in Houhora Harbour, Northland, New Zealand in early 2005 and subsequently found on oyster racks in Parengarenga Harbour and the Bay of Islands. The Northland ascidian was identified with a combination of morphological characters and DNA cytochrome c oxidase I (COI) sequence data, as Eudistoma elongatum, a species native to Australia, where it is found from northern New South Wales to Northern Queensland, and distinguished from Eudistoma circumvallatum, the only reported species in this genus from New Zealand. Ascidian larvae are weak dispersers and long distance dispersal of E. elongatum is likely to be enhanced by vectors such as oyster barges and/or movement of cultured oysters. In its native range, E. elongatum is restricted to areas with a minimum winter sea temperature of 16°C. Assuming similar biological limitations apply in New Zealand, the spread of E. elongatum might be restricted to northern New Zealand (north of latitude 37°S).     

An Al-spinel ultramafic-mafic inclusion suite and high pressure megacrysts in an analcimite and their bearing on basaltic magma fractionation at elevated pressures

An analcimite sill, which intrudes Carboniferous sedimentary rocks northwest of the township of Barraba in northeastern New South Wales, is exceedingly rich in ultramafic and mafic inclusions and also contains a varied megacryst assemblage. The majority of inclusions belong to an ultramafic-mafic granulite suite whose members generally contain a Cr-poor green spinel. Layering is preserved in many inclusions and their textures are appropriate to those arising from recrystallization at subsolidus temperatures. Ultramafic granulites of the Al-spinel suite are mainly pyroxenites, with rarer lherzolites, and mafic granulites usually consist of the assemblage plagioclasea-luminous pyroxenes-spinel. Ca-rich tschermakitic clinopyroxenes and coexisting aluminous Ca-poor orthopyroxenes define a trend of moderate iron enrichment. Spinels also display significant Fe²⁺ → Mg substitution. Plagioclase in some plagioclase-bearing pyroxenites and mafic granulites contains numerous rod-like inclusions of spinel, compositionally similar to the discrete spinels unassociated with plagioclase. The formation of spinel in plagioclase is believed to have resulted largely from the migration of (Mg, Fe²⁺) to Al-rich nucleation sites in the feldspar. Other inclusion types include Cr-spinel lherzolites —more Fe-rich than Cr-diopside lherzolite inclusions in alkaline volcanics — and rare wehrlite heteradcumulates, probably cognate with the host analcimite. The megacryst assemblage is dominated by anorthoclase megacrysts, which are accompanied, in order of decreasing abundance, by megacrysts of tschermakitic clinopyroxene, titanbiotite, kaersutite, and aluminous titanomagnetite. The Al-spinel mafic granulites have low Ti, K and P contents and their petrochemical affinities are high-alumina mafic alkaline to transitional. They compare closely in major and minor element chemistry with some ocean ridge basalts. The Al-spinel ultramafic-mafic inclusions suite is interpreted as the remnants of a layered ultramafic-mafic “pluton ” which initially crystallized at pressures in the vicinity of 10 kb and subsequently re-equilibrated at subsolidus temperatures (ca 950° C) and comparable pressures. The parent magma was K-poor, ol-normative subalkaline and its fractionation at moderate pressures, controlled mainly by olivine and subcalcic clinopyroxene, resulted in decreases in the derivative liquids in their saturation levels and ol contents, and increases in Al and Ca. These trends are reflected in the compositions of the mafic granulites. The pressure regime of megacryst formation apparently was greater than 10–12 kb i.e. the megacrysts precipitated before acquisition of xenoliths of the Al-spinel granulite suite by the analcimite host. Anorthoclase fractionation produced only limited compositional changes in the original alkali basaltic melt.     

Chemical denudation rates in Kärkevagge, Swedish Lapland

This study examines the spatial and temporal variability of chemical denudation rates in Kärkevagge, northern Sweden. The chemical flux rates within the valley are strongly influenced by the local geology. Chemical denudation rates determined for the study period are more than double those previously reported in the literature for this valley. Rates of greater than 46t km⁻² a⁻¹ were measured at the valley mouth over the course of the melt season. This difference is likely due to differences in measurement technique compared to that used by past researchers. This rate is also much higher than for other arctic and alpine watersheds. Chemical denudation in Kärkevagge is comparable to larger temperate rivers. The rapid chemical denudation in Kärkevagge is likely due to sulfide weathering creating acid solutions.     

Incipient weathering rind development on introduced machine‐polished granite discs in an Arctic alpine environment,northern Scandinavia

Weathering rinds, zones of alteration on the exterior surfaces of rock outcrops and coarse unconsolidated surficial debris are widely used by geomorphologists and Quaternary geologists as indicators of the relative age of landforms and landscapes. Additionally they provide unique insights into the earliest stages of rock and mineral weathering, yet the origin of these alteration zones is relatively poorly understood. This lack of understanding applies especially to the initial stages of rind formation. The study reported in this paper has two principal objectives. The first is to use lightly polished granite discs inserted in soil profiles under several different plant communities in an Arctic alpine environment for a period of four or five years to investigate the nature of incipient weathering rind development. The second is to investigate the factors responsible for spatial variability in the nature and rates of rind formation. Incipient weathering rind development on the outer edges of the granite discs is observable and measurable over a period of time as short as four years in the mild Arctic alpine environment of Swedish Lapland. The earliest stages of rind development involve the development of a porous structure consisting of a combination of pits and fractures which have been solutionally enlarged and modified. Solution appears to be preferentially concentrated on the surfaces of feldspars and, to a lesser extent, quartz. In addition, iron oxides are present along grain boundaries and in grain interiors and are interpreted to have been derived from the oxidation of ferromagnesian minerals. Spatial variability in weathering rind development appears to be particularly driven by differences in moisture but is not related to soil pH. Copyright © 2005 John Wiley & Sons, Ltd.     

Strip Transect Sampling to Estimate Object Abundance in Homogeneous and Non-homogeneous Poisson Fields: a Simulation Study of the Effects of Changing Transect Width and Number

This paper investigates the use of strip transect sampling to estimate object abundance when the underlying spatial distribution is assumed to be Poisson. A design-based rather than model-based approach to estimation is investigated through computer simulation, with both homogeneous and non-homogeneous fields representing individual realizations of spatial point processes being considered. Of particular interest are the effects of changing the number of transects and transect width (or alternatively, coverage percent or fraction) on the quality of the estimate. A specific application to the characterization of unexploded ordnance (UXO) in the subsurface at former military firing ranges is discussed. The results may be extended to the investigation of outcrop characteristics as well as subsurface geological features.     

Observations of the infrared triplet of singly ionized calcium

Observations are presented of the Caii infrared triplet (8498 Å, 8542 Å, and 8662 Å) at three positions on the solar disk to make possible direct analyses of the lines and comparisons with theoretical computations. The source functions for the two strongest lines (8542 Å and 8662 Å) are equal at those heights corresponding to the wings of the lines (¦¦ > 0.4 Å) but not to those of the cores. We suggest that the apparent source function inequality in the cores is due to limb darkening caused by inhomogeneities in the chromosphere.Of the National Bureau of Standards and University of Colorado.     

Local hydraulic gradient estimator analysis of long-term monitoring networks

Three measurements of head at unique locations form a three-point estimator of the local magnitude and orientation of the hydraulic gradient. The relative head measurement error (RHME) is defined here as the measurement error normalized by the head drop across the three-point estimator. Monte Carlo simulation results show that estimators with base to height ratios between 0.5 and 5.0 and that are large enough to keep the RHME below 0.05 create the most accurate gradient estimates and provide criteria for identifying good estimators. These criteria are applied to an example ground water monitoring network design problem in the Culebra dolomite near the Waste Isolation Pilot Plant repository to both analyze temporal changes and modify and expand the current monitoring network. Limiting the three-point estimators to those that meet the shape and RHME criteria reduces the number of possible estimators by >50% and leads to approximately 1 order of magnitude decrease in the average estimated magnitude of the gradient relative to using all estimators. Application of these criteria also reduces the variability in estimated gradient magnitude and orientation between the two time periods of measurements. Redundant wells in the network are identified by removing each existing well in turn and determining which removals yield the smallest decrease in the number of acceptable estimators. Optimal new well locations are identified by mapping the increase in total number of acceptable estimators for a single new well placed in the study domain.