Calculation of ship collision avoidance manoeuvres: A simplified approach

The moment at which in a two-ship encounter a collision avoidance manoeuvre should be initiated in order to achieve a specific distance at the closest point of approach has been calculated. The calculations were based on the kinematics of encounter and simplified equations of motion. Mathematical equations which relate the maneouvring distance, the turning direction and the extent of course change for any desired passing distance and any given turning rate are determined. Knowledge of these quantities is essential for the safe conduct of the ship with automatic, computer-assisted navigation as well as with ordinary, manual navigation if the navigator no longer contents himself with estimates but wishes to know precisely in advance the outcome of any specific manoeuvre he chooses.     

Formulation of a continuously stratified sea model with three-dimensional representation of the upper layer

A two-layered model is considered in which the upper layer is continuously stratified and the lower layer is homogeneous. The system is driven by atmospheric forces. Bottom stress and topography are included in the model. The linear three-dimensional hydrodynamical equations are used to describe the system. Taking the eddy viscosity in the upper layer as inversely proportional to the static stability, the dependent variables are expanded in terms of continuous functions in the vertical (eigenfunctions). Using this method it is possible to compute currents and internal displacements at any depth in the upper layer. The three-dimensional structure of the lower layer is not considered in this model. The equations describing the lower layer are integrated over depth to give depth mean currents. Using a staggered finite-difference grid in the horizontal and a forward time-stepping procedure, numerical test experiments are carried out for a cross section and for a closed rectangular basin.     

Persistent volcanic signature observed around Barren Island, Andaman Sea, India

This study delineates the formation of a warm pool (>34°C) of air to the west (downwind) of the active volcano of the Barren Island during October–November 2005. Barren Island is located in the Sumatra–Andaman region, about 135 km east of Port Blair, and lies within the Burma microplate, the southern tip of which experienced a submarine earthquake (M _w 9.3) causing a tsunami in December 2004. Barren Island is the only volcano, which has shown sustained eruptive activity since shortly after the Great Sumatran Earthquake of December 2004. Our observations require further corroboration to relate how submarine earthquakes activate volcanoes and how far these thermal emissions influence climate changes. Because it links global warming and climate changes to the frequent emissions from a volcano activated by submarine earthquakes, this case study is of special interest to the earth-ocean-atmosphere sciences community.     

Phototoxicity of pyrene and benzo[a]pyrene to embryo-larval stages of the Pacific oyster Crassostrea gigas

There is a growing body of evidence to suggest that certain polycyclic aromatic hydrocarbons (PAHs) pose a greater hazard to aquatic organisms than previously demonstrated, due to their potential to cause photo-induced toxicity when exposed to ultraviolet (UV) radiation. The consequences of photo-induced toxicity are reported here for embryo-larval stages of the pacific oyster Crassostrea gigas, following exposure to pyrene and benzo[a]pyrene. During laboratory investigations, significant increases in toxicity were observed in the presence of environmentally attainable levels of UV-radiation, compared with embryos exposed to PAH alone, at levels previously deemed to have little acute biological effect. The phototoxicity of pyrene and benzo[a]pyrene completely inhibited the development to the D-shell larval stage when embryos were simultaneously exposed to 5 microg l(-1) PAH and ultraviolet light (UVB = 6.3 +/- 0.1 microW/cm2 and UVA = 456.2 +/- 55 microW/cm2). A linear relationship was also demonstrated for benzo[a]pyrene phototoxicity with decreasing UV light intensity.     

GEBCO Centennial Special Issue – Charting the Secret World of the Ocean Floor: The GEBCO Project 1903–2003

This special issue of Marine Geophysical Researches presents five papers dealing with GEBCO, the General Bathymetric Chart of the Oceans, which celebrated its Centennial in April 2003, hosted by the International Hydrographic Bureau and the Principality of Monaco. Over the past 103 years GEBCO has been the sole body dedicated to compiling all available data to produce standardized maps of the oceans and seas covering 71% of planet Earth. Over time GEBCO has undergone a complete transformation as sparse 500 m contours on paper charts were replaced by digital grids with ever-increasing resolution. The 2003 Centennial saw the release on two CDROMS with the first global 1′ grid, produced by methods unheard of in 1984, when GEBCO’s last 6th Edition paper chart set was published. In GEBCO’s second century, the thrust is towards global grids that will capture the resolutions available with evolving deep-water swath mapping technologies, as well as vast improvement in the details of the shallow continental shelves that have traditionally been the preserve of the hydrographic community. As little more than 10% of the oceans have been mapped to the desired level of detail, there is much to be done. However refinements in satellite altimetry appear to offer an interim stop-gap as more multi-beam sonars ply the oceans and as the littoral countries of the world map their adjacent marine areas for submission under Article 76 of UNCLOS (United Nations, 1983, 1999). In addition GEBCO is becoming increasingly proactive, with outreach to the public via the internet and a new GEBCO Map of the World, active data-scrounging, and encouraging development of the first drifting buoys for acquiring data in the inaccessible areas of the Antarctic, SW Pacific, and Arctic Oceans.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Shoreline variability via empirical orthogonal function analysis: Part I temporal and spatial characteristics

Empirical orthogonal functions (EOFs) or principal components were used to extract the significant modes of shoreline variability from several data sets collected at three very different locations. Although EOFs have proven to be a valuable tool in the analysis of nearshore data, most applications have focused on the ability of the technique to describe cross-shore or profile variability. Here however, EOFs were used to help identify the dominant modes of longshore shoreline variability at Duck, North Carolina, the Gold Coast, Australia, and at several locations within the Columbia River Littoral Cell in the U.S. Pacific Northwest. In part one of this analysis, characteristic patterns of shoreline variability identified by the EOF analysis are described in detail. At each site, the dominant modes consisting of the first four eigenfunctions were found to describe nearly 95% of the total shoreline variability. At both Duck and the Gold Coast, several interesting longshore periodic features suggestive of sand waves were identified, while boundary effects related to natural headlands and navigational structures/entrances dominated the Pacific Northwest data sets.     

中国马尾藻属的研究Ⅲ.丛伞托序族

对中国马尾藻属，真马尾藻亚属，滑托组，丛伞托序族的种类进行系统研究。此族种类的主要特征是生殖托光滑，聚伞状排列在小校上，生殖托柄状部位都有生殖窝。多孢马尾藻是该族的非常特殊种类，它的分校和小分枝上密生刺和羽状分裂的藻叶。文中还报道了一个新种一长干马尾藻。模式标本产自广东省徐闻，还见于海丰。至今为止，丛伞托序族在中国共有两种。