Link between SSZ ophiolite formation, emplacement and arc inception, Northland, New Zealand: U–Pb SHRIMP constraints; Cenozoic SW Pacific tectonic implications

New U–Pb age-data from zircons separated from a Northland ophiolite gabbro yield a mean ²⁰⁶Pb/²³⁸U age of 31.6 ± 0.2 Ma, providing support for a recently determined 28.3 ± 0.2 Ma SHRIMP age of an associated plagiogranite and  29–26 Ma ⁴⁰Ar/³⁹Ar ages (n = 9) of basalts of the ophiolite. Elsewhere, Miocene arc-related calc-alkaline andesite dikes which intrude the ophiolitic rocks contain zircons which yield mean ²⁰⁶Pb/²³⁸U ages of 20.1 ± 0.2 and 19.8 ± 0.2 Ma. The ophiolite gabbro and the andesites both contain rare inherited zircons ranging from 122–104 Ma. The Early Cretaceous zircons in the arc andesites are interpreted as xenocrysts from the Mt. Camel basement terrane through which magmas of the Northland Miocene arc lavas erupted. The inherited zircons in the ophiolite gabbros suggest that a small fraction of this basement was introduced into the suboceanic mantle by subduction and mixed with mantle melts during ophiolite formation.

We postulate that the tholeiitic suite of the ophiolite represents the crustal segment of SSZ lithosphere (SSZL) generated in the southern South Fiji Basin (SFB) at a northeast-dipping subduction zone that was initiated at about 35 Ma. The subduction zone nucleated along a pre-existing transform boundary separating circa 45–20 Ma oceanic lithosphere to the north and west of the Northland Peninsula from nascent back arc basin lithosphere of the SFB. Construction of the SSZL propagated southward along the transform boundary as the SFB continued to unzip to the southeast. After subduction of a large portion of oceanic lithosphere by about 26 Ma and collision of the SSZL with New Zealand, compression between the Australian Plate and the Pacific Plate was taken up along a new southwest-dipping subduction zone behind the SSZL. Renewed volcanism began in the oceanic forearc at 25 Ma producing boninitic-like, SSZ and within-plate alkalic and calc-alkaline rocks. Rocks of these types temporally overlap ophiolite emplacement and subsequent Miocene continental arc construction.     

A Method for Estimating Field-Scale Mass Transfer Rate Parameters and Assessing Aquifer Cleanup Times

A general method for estimating ground-water solute mass transfer rate parameters from field test data is presented. The method entails matching solute concentration and hydraulic head data collected during the recovery phase of a pumping test through application of a simulation-regression technique. Estimation of hydraulic conductivity and mass transfer rate parameter values is performed by fitting model simulations to the data. Parameter estimates are utilized to assess cleanup times for pump-and-treat aquifer remediation scenarios. Uncertainty in the cleanup time estimate is evaluated using statistical information obtained with the parameter estimation technique. Application of the method is demonstrated using a hypothetical ground-water flow and solute transport system. Simulations of field testing, parameter estimation, and remedial time frames are performed to evaluate the usefulness of the method. Sets of random noise that signify potential field and laboratory measurement errors are combined with the hypothetical data to provide rigorous testing of the method. Field tests are simulated using ranges of values for data noise, the mass transfer rate parameters, the test pumping rates, and the duration of recovery monitoring to evaluate their respective influence on parameter and cleanup time estimates. The demonstration indicates the method is capable of yielding accurate estimates of the solute mass transfer rate parameters. When the parameter values for the hypothetical system are well estimated, cleanup time predictions are shown to be more accurate than when calculated using the local equilibrium assumption.     

Passive seismic control of cable-stayed bridges with damped resonant appendages

A study is conducted to investigate the effectiveness of attaching to cable-stayed bridges resonant appendages with a relatively small mass and a high damping ratio as a means to reduce their response to earthquake excitations. The study is based on a previously developed formulation that shows that the use of these appendages may increase the inherent damping of building structures and, as a result, may reduce their response to seismic disturbances. It includes numerical and experimental tests that are conducted to assess the validity of such a formulation for the case of cable-stayed bridges and the extent to which such appendages can reduce their seismic response. In the numerical study, an actual cable-stayed bridge is modelled with finite elements and analysed with and without the proposed appendages under different earthquake ground motions. Appendages with damping ratios of 10, 15, 20 and 30 per cent and masses that, respectively, represent 0.67, 1.5, 2.7 and 6.0 per cent of the total mass of the bridge are considered. In the experimental test, a 3.7 m long cable-stayed bridge and an appendage consisting of a small mass, a small spring and a small viscous damper are built and the bridge tested, without and with the appendage, on a pair of shaking tables which are set to reproduce ground acceleration records from past earthquakes. The damping ratio of the appendage in this test is 32 per cent and its mass represents about 8 per cent of the total mass of the bridge model. In the numerical test, it is found that the appendages reduce the longitudinal response of the bridge deck up to 88 per cent. Similarly, in the experimental test it is found that the appendage reduces the longitudinal bridge deck response by about 41 per cent. From these studies, it is concluded that the suggested appendages may indeed be effective in reducing the seismic response of cable-stayed bridges as they are for building structures.     

The community morphology of skilled migration: the changing role of voluntary and community organisations (VCOs) in the grounding of British migrant identities in Paris (France)

Research into skilled migrant communities tends to emphasize the grounding of identities through transnationalism and mobility. Less research has been conducted into how skilled migrants actually ground their identities within the city through everyday social networks. The paper addresses this imbalance by examining the changing significance of British voluntary and community organisations (VCOs) in Paris, France. Combining qualitative and quantitative data, findings show local migrant networks to be important focal points for the British even though migrants’ lives may increasingly be transnational in orientation. The research also shows that in situ social networks are evolving. Specifically, traditional forms of elite expatriate communality are not as omnipotent as they once were, with the popularity of some high-profile British VCOs in Paris declining over recent decades. The paper argues that the link between social dynamism and communal morphology helps explain this shift: as British middle-class lifestyles have fragmented, and as the British migrant population in Paris has grown in scale and scope, so the range of VCOs and associated informal networks has grown. Whilst some skilled migrants still embed within traditional expatriate organisations, Britishness is increasingly grounded elsewhere; both within the city through alternative social networks, and located beyond the city through transnational ties.     

Biokinetics of Radiocobalt in the Asteroid Asterias rubens (Echinodermata): Sea Water and Food Exposures

Uptake and loss of cobalt-57 were investigated in the starfish Asterias rubens, in order to assess its value as a sentinel organism for nearshore radionuclide contamination. Whole-body uptake from sea water was linear over a 32-day exposure period and reached wet weight concentration factor (CF) of 23 ± 5. Bioaccumulation of ⁵⁷Co was dependent upon body compartment, the aboral part of the body wall concentrating cobalt to the greatest degree (wet weight CF: 77 ± 16). After restoration of uncontaminated conditions, radiocobalt was released following an exponential loss kinetics characterized by a biological half-life (T_b1/2) of 27 ± 6 day. Dietary radiocobalt (taken up during a short-term feeding for 24 h on radiolabelled mussels) showed a much more rapid turnover time (T_b1/2: 14 ± 4 d), suggesting that A. rubens accumulates this radionuclide predominantly from sea water. A. rubens, and more particularly the aboral part of its body wall, would readily reveal the presence of an environmental contamination by radiocobalt and could preserve this information over a period of few months.     

Temporal patterns of suspended sediment yield following moderate to extreme hydrological events recorded in varved lacustrine sediments

A 487‐year annually laminated (varved) sediment record from Nicolay Lake, Cornwall Island, in the Canadian High Arctic was evaluated to determine the impact that years with high sediment yields had on sediment yields in subsequent years. All of the 40 largest years showed evidence for increased sediment yield in the subsequent 10–30 years. The positive anomalies in lagging years were approximately scaled according to the size of the initiating year, although many intermediate years (25‐ to 100‐year recurrence) showed weak or variable responses. The smallest events considered (10‐ to 25‐year recurrence) showed a consistent, but low‐amplitude response. Additionally the 10‐year events revealed frequent negative sediment yield anomalies in the preceding decade. This behaviour was interpreted as a frequent sediment activation cycle initiated by the modest year, and leading to sediment yield hysteresis lasting 15–25 years. The largest years (greater than 50‐year recurrence) showed consistently above‐average sediment yields in the preceding decade, in part due to the frequent occurrence of moderate (Q₁₀) years. It is hypothesized that temporary storage of sediment and previous initiation of erosion sites resulted in extraordinary sediment yields during intense summer rainfall events. This study demonstrates the potential use of varved lake sediment records to improve our understanding of long‐term sediment dynamics. These records present an opportunity to further develop and test sediment dynamic and routing models to gain insight into the interaction of time and space in fluvial and sediment delivery processes. Copyright © 2002 John Wiley & Sons, Ltd.     

The International Laser Ranging Service and its support for IGGOS

The International Laser Ranging Service (ILRS) was established in September 1998 as a service within the IAG to support programs in geodetic, geophysical, and lunar research activities and to provide data products to the International Earth Rotation Service (IERS) in support of its prime objectives. Now in operation for 5 years, the ILRS develops: (1) the standards and specifications necessary for product consistency and (2) the priorities and tracking strategies required to maximize network efficiency. The service collects, merges, analyzes, archives and distributes satellite and lunar laser ranging data to satisfy a variety of scientific, engineering, and operational needs and encourages the application of new technologies to enhance the quality, quantity, and cost effectiveness of its data products. The ILRS works with: (1) the global network to improve station performance; (2) new satellite missions in the design and building of retroreflector targets to maximize data quality and quantity and (3) science programs to optimize scientific data yield. The ILRS Central Bureau maintains a comprehensive web site as the primary vehicle for the distribution of information within the ILRS community. The site, which can be accessed at: http://ilrs.gsfc.nasa.gov is also available at mirrored sites at the Communications Research Laboratory (CRL) in Tokyo and the European Data Center (EDC) in Munich.During the last 2 years, the ILRS has addressed very important challenges: (1) data from the field stations are now submitted hourly and made available immediately through the data centers for access by the user community; (2) tracking on low satellites has been significantly improved through the sub-daily issue of predictions, drag functions, and the real-time exchange of time biases; (3) analysis products are now submitted in SINEX format for compatibility with the other space geodesy techniques; (4) the Analysis Working Group is heavily engaged in Pilot Projects as it works toward an ILRS “standard” global solution and (5) SLR has significantly increased its participation in the International Terrestrial Reference Frame (ITRF) activity, which is important to the success of IGGOS.     

A closed-loop EKF and multi-failure diagnosis approach for cooperative GNSS positioning

Current cooperative positioning with global navigation satellite system (GNSS) for connected vehicle application mainly uses pseudorange measurements. However, the positioning accuracy offered cannot meet the requirements for lane-level positioning, collision avoidance and future automatic driving, which needs real-time positioning accuracy of better than 0.5 m. Furthermore, there is an apparent lack of research into the integrity issue for these new applications under emerging driverless vehicle applications. In order to overcome those problems, a new extended Kalman filter (EKF) and a multi-failure diagnosis algorithm are developed to process both GNSS pseudorange and carrier phase measurements. We first introduce a new closed-loop EKF with partial ambiguity resolution as feedback to address the low accuracy issue. Then a multi-failure diagnosis algorithm is proposed to improve integrity and reliability. The core of this new algorithm includes using Carrier phase-based Receiver Autonomous Integrity Monitoring method for failure detection, and the double extended w test detectors to identify failure. A cooperative positioning experiment was carried out to validate the proposed method. The results show that the proposed closed-loop EKF can provide highly accurate positioning, and the multi-failure diagnosis method is effective in detecting and identifying failures for both code and carrier phase measurements.     

SensePlace3: a geovisual framework to analyze place–time–attribute information in social media

SensePlace3 (SP3) is a geovisual analytics framework and web application that supports overview + detail analysis of social media, focusing on extracting meaningful information from the Twitterverse. SP3 leverages social media related to crisis events. It differs from most existing systems by enabling an analyst to obtain place-relevant information from tweets that have implicit as well as explicit geography. Specifically, SP3 includes not just the ability to utilize the explicit geography of geolocated tweets but also analyze implicit geography by recognizing and geolocating references in both tweet text, which indicates locations tweeted about, and in Twitter profiles, which indicates locations affiliated with users. Key features of SP3 reported here include flexible search and filtering capabilities to support information foraging; an ingest, processing, and indexing pipeline that produces near real-time access for big streaming data; and a novel strategy for implementing a web-based multi-view visual interface with dynamic linking of entities across views. The SP3 system architecture was designed to support crisis management applications, but its design flexibility makes it easily adaptable to other domains. We also report on a user study that provided input to SP3 interface design and suggests next steps for effective spatiotemporal analytics using social media sources.