Surface water–groundwater exchange dynamics in a tidal freshwater zone

In coastal rivers, tides can propagate for tens to hundreds of kilometres inland beyond the saltwater line. Yet the influence of tides on river–aquifer connectivity and solute transport in tidal freshwater zones (TFZs) is largely unknown. We estimate that along the TFZ of White Clay Creek (Delaware, USA), 11% of river water exchanges through tidal bank storage zones. Additional hyporheic processes such as flow through bedforms likely contribute even more exchange. The turnover length associated with tidal bank storage is 150 km, on the order of turnover lengths for all hyporheic exchange processes in non‐tidal rivers of similar size. Based on measurements at a transect of piezometers located 17 km from the coast, tides exchange 0.36 m³ of water across the banks and 0.86 m³ across the bed per unit river length. Exchange fluxes range from ?1.66 to 2.26 m day^?1 across the bank and ?0.84 to 1.88 m day^?1 across the bed. During rising tide, river water infiltrates into the riparian aquifer, and the downstream transport rate in the channel is low. During falling tide, stored groundwater is released to the river, and the downstream transport rate in the channel increases. Tidal bank storage zones may remove nutrients or other contaminants from river water and attenuate nutrient loads to coasts. Alternating expansion and contraction of aerobic zones in the riparian aquifer likely influence contaminant removal along flow paths. A clear need exists to understand contaminant removal and other ecosystem services in TFZs and adopt best management practices to promote these ecosystem services. Copyright © 2015 John Wiley & Sons, Ltd.     

Floridians’ propensity to support ad valorem water billing increases to protect water supply: a panel evaluation

ABSTRACT

While threats to water availability are concerning worldwide, the coastal, rapidly urbanizing state of Florida, USA, is especially at risk. This study used a value approach to determine the propensity to support 10 and 50% monthly water bill increases to inform potential social marketing strategies to protect Florida’s freshwater supply from depletion. The results from five years of public opinion data indicate an increasing percentage of consumers who are willing to support the protection of Florida’s water supply since 2013, with a slight dip in 2017. Upon examination of socio-demographic characteristics, income appeared consistently as an influencer of the propensity to support water bill increases, while factors such as age and race inconsistently appeared throughout the models. Decision makers should consider the significance of income along with heterogeneity in the propensity to support water bill increases to protect Florida’s freshwater. The recommendations for application and research incorporate insights from social marketing, agricultural economics, extension education and sociology.     

The evolution of an internal bore at the Malin shelf break

Observations of internal waves were made at the Malin shelf edge during SESAME (Shelf Edge Studies Acoustic Measurement Experiment), a part of the NERC LOIS-SES experiment, in August-September 1996. These measurements provide a high resolution dataset demonstrating internal wave generation and propagation. This note presents observations of the evolution of an internal bore. The process is shown clearly in a sequence of thermistor chain tows across the shelf break covering a complete tidal cycle, as the double-sided bore transforms into a group of undulations and eventually into more distinct solitary waveforms. Current structures associated with the bore and waves were also observed by ship-mounted ADCP. Analysis of the waveforms in terms of the linear modes and empirical orthogonal functions (EOFs) indicate the dominance of the first mode, which is typical of a shallow water seasonal thermocline environment. Determination of the phase speed of the waves from the consecutive ship surveys enabled the Doppler shift in the towed data to be removed, allowing analysis of the real length scales of the waves. The bore evolution has been modelled using a first order non-linear KdV model for the first mode, initialised with the waveform in the first survey. Comparison of the model and the observations show close agreement in the amplitudes, length scales, phase speeds and separations of the leading internal waves as they evolve. Finally, analysis of the observed internal wave shapes indicates that, within the uncertainties of measurement, the wave-lengths lie between those predicted by first and second order soliton theory.     

Alluvial cutoffs as indicators of former channel conditions

Although alluvial cutoffs record accurately the geometry, bedforms, and bed material of the channel when last active, few attempts have been made to use cutoffs in studies of channel changes. A detailed record of historical channel changes on the lower Hunter River in southeastern Australia has shown that this channel responds to naturally alternating periods of high and low flood activity, called flood- and drought-dominated regimes respectively. Sinuosity decreased from 3·84 in 1870, to 2·66 in 1893 and to 1·38 in 1970 through the development of eight cutoffs. The channel also aggraded with medium sand burying the former bed material of mixed mud, coarse sand, and gravel. Channel straightening was a response to increased flood frequencies during the flood-dominated regimes of the late 19th and 20th centuries, combined with localized river engineering works and increased sand load. Detailed stratigraphic studies were carried out on three neck cutoffs and one chute cutoff which were abandoned in 1890, 1950, 1952, and 1956. A comparison of former and present bed elevations and bed material size showed similar trends to those determined by the historical record, confirming the reliability of cutoffs as indicators of former channel conditions. The sedimentary infills of the cutoffs are not uniformly fine grained as recorded previously in the literature. Relatively thin, fine-grained fills were deposited during the drought-dominated regime of the first half of this century but thick, coarser-grained fills were deposited after 1949 during the flood-dominated regime. All fills fine upwards. Cutoff infills provide a record of changing flood activity and sediment loads.     

Crustal reworking in a shear zone: transformation of metagranite to migmatite

This study uses field, microstructural and geochemical data to investigate the processes contributing to the petrological diversity that arises when granitic continental crust is reworked. The Kinawa migmatite formed when Archean TTG crust in the São Francisco Craton, Brazil was reworked by partial melting at ~730 °C and 5–6 kbar in a regional‐scale shear zone. As a result, a relatively uniform leucogranodiorite protolith produced compositionally and microstructurally diverse diatexites and leucosomes. All outcrops of migmatite display either a magmatic foliation, flow banding or transposed leucosomes and indicate strong, melt‐present shearing. There are three types of diatexite. Grey diatexites are interpreted to be residuum, although melt segregation was incomplete in some samples. Biotite stable, H₂O‐fluxed melting is inferred via the reaction Pl + Kfs + Qz + H₂O = melt and geochemical modelling indicates 0.35–0.40 partial melting. Schlieren diatexites are extremely heterogeneous; residuum‐rich domains alternate with leucocratic quartzofeldspathic domains. Homogeneous diatexites have the highest SiO₂ and K₂O contents and are coarse‐grained, leucocratic rocks. Homogeneous diatexites, quartzofeldspathic domains from the schlieren diatexites and the leucosomes contain both plagioclase‐dominated and K‐feldspar‐dominated feldspar framework microstructures and hence were melt‐derived rocks. Both types of feldspar frameworks show evidence of tectonic compaction. Modelling the crystallization of an initial anatectic melt shows plagioclase appears first; K‐feldspar appears after ~40% crystallization. In the active shear zone setting, shear‐enhanced compaction provided an essentially continuous driving force for segregation. Thus, Kinawa migmatites with plagioclase frameworks are interpreted to have formed by shear‐enhanced compaction early in the crystallization of anatectic melt, whereas those with K‐feldspar frameworks formed later from the expelled fractionated melt. Trace element abundances in some biotite and plagioclase from the fractionated melt‐derived rocks indicate that these entrained minerals were derived from the wall rocks. Results from the Kinawa migmatites indicate that the key factor in generating petrological diversity during crustal reworking is that shear‐enhanced compaction drove melt segregation throughout the period that melt was present in the rocks. Segregation of melt during melting produced residuum and anatectic melt and their mixtures, whereas segregation during crystallization resulted in crystal fractionation and generated diverse plagioclase‐rich rocks and fractionated melts.     

Schlieren formation in diatexite migmatite: examples from the St Malo migmatite terrane, France

Schlieren are trains of platy or blocky minerals, typically the ferromagnesian minerals and accessory phases, that occur in granites and melt‐rich migmatites, such as diatexites. They have been considered as: (1) unmelted residue from xenoliths or the source region; (2) mineral accumulations formed during magma flow; (3) compositional layering; and (4) sites of melt loss. In order to help identify schlieren‐forming processes in the diatexites at St Malo, differences in the size, shape, orientation, distribution and composition of the biotite from schlieren and from their hosts have been investigated. Small biotite grains are much less abundant in the schlieren than in their hosts. Schlieren biotite grains are generally larger, have greater aspect ratios and have, except in hosts with low (< 10%) biotite contents, a much stronger shape preferred orientation than host biotite. The compositional ranges of host and schlieren biotite are similar, but schlieren biotite defines tighter, sharper peaks on composition‐frequency plots. Hosts show magmatic textures such as imbricated (tiled), unstrained plagioclase. Some schlieren show only magmatic textures (tiled biotite, no crystal‐plastic strain features), but many have textures indicating submagmatic and subsolidus deformation (e.g. kinked grains) and these schlieren show the most extensive evidence for recrystallization. Magmas at St Malo initially contained a significant fraction of residual biotite and plagioclase crystals; smaller biotite grains were separated from the larger plagioclase crystals during magma flow. Since plagioclase was also the major, early crystallizing phase, the plagioclase‐rich domains developed rapidly and reached the rigid percolation threshold first, forcing further magma flow to be concentrated into narrowing melt‐rich zones where the biotite had accumulated, hence increasing shear strain and the degree of shape preferred orientation in these domains. Schlieren formed in these domains as a result of grain contacts and tiling in the grain inertia‐regime. Final amalgamation of the biotite aggregates into schlieren involved volume loss as melt trapped between grains was expelled after the rigid percolation threshold was reached in the biotite‐rich layers.     

The GIN Sea—A synthesis of its physical oceanography and literature review 1972–1985

A synthesis and review of the physical oceanography of the GIN Sea (Greenland, Iceland and Norwegian Seas) is presented. An accompanying bibliography is included from 1972 through 1985. Some 1986 works are also noted. Emphasis is placed on describing the GIN Sea as a major semi-enclosed basin that plays a role unique among the world's oceans: by providing a strong two-way advective exchange between the ice-covered Polar Sea and the North Atlantic Ocean and at the same time acting as the primary site for Northern Hemisphere bottom water formation. The water masses for the GIN Sea are defined, in a manner as consistent as possible with the literature. The large-scale oceanographic and meteorological factors influencing the water mass formation and circulation are described. A sample calculation of the various horizontal and vertical thermohaline-driven exchanges is given.     

Vesta's mineralogical composition as revealed by the visible and infrared spectrometer on Dawn

The Dawn spacecraft mission has provided extensive new and detailed data on Vesta that confirm and strengthen the Vesta–howardite–eucrite–diogenite (HED) meteorite link and the concept that Vesta is differentiated, as derived from earlier telescopic observations. Here, we present results derived by newly calibrated spectra of Vesta. The comparison between data from the Dawn imaging spectrometer—VIR—and the different class of HED meteorites shows that average spectrum of Vesta resembles howardite spectra. Nevertheless, the Vesta spectra at high spatial resolution reveal variations in the distribution of HED‐like mineralogies on the asteroid. The data have been used to derive HED distribution on Vesta, reported in Ammannito et al. (2013), and to compute the average Vestan spectra of the different HED lithologies, reported here. The spectra indicate that, not only are all the different HED lithologies present on Vesta, but also carbonaceous chondritic material, which constitutes the most abundant inclusion type found in howardites, is widespread. However, the hydration feature used to identify carbonaceous chondrite material varies significantly on Vesta, revealing different band shapes. The characteristic of these hydration features cannot be explained solely by infalling of carbonaceous chondrite meteorites and other possible origins must be considered. The relative proportion of HEDs on Vesta's surface is computed, and results show that most of the vestan surface is compatible with eucrite‐rich howardites and/or cumulate or polymict eucrites. A very small percentage of surface is covered by diogenite, and basaltic eucrite terrains are relatively few compared with the abundance of basaltic eucrites in the HED suite. The largest abundance of diogenitic material is found in the Rheasilvia region, a deep basin, where it clearly occurs below a basaltic upper crust. However, diogenite is also found elsewhere; although the depth to diogenite is consistent with one magma ocean model, its lateral extent is not well constrained.     

Sedimentary filling characteristics of the South China Sea oceanic basin,with links to tectonic activity during and after seafloor spreading

ABSTRACT

Based on approximately 11,000 km of seismic reflection data collected across the South China Sea oceanic basin, we describe the sedimentary filling characteristics of the basin since its Oligocene opening, as well as connections between this history and contemporaneous regional tectonic events. The seismic lines are spaced ~50 km apart, and the data are tied to International Ocean Discovery Program (IODP) Expedition 349 drilling data. Basin filling occurred in three phases, with basin-wide mean sedimentation rates increasing through time. During the Oligocene to middle Miocene, sediments accumulated primarily in the northern East and Northwest Sub-basins, with a mean basin-wide sedimentation rate of 8 m/m.y. The presence of these deposits over deep basement floor indicates that seafloor spreading initiated in these northern regions. During the late Miocene, deposition occurred primarily in the Northwest Sub-basin and partly in the southern East Sub-basin, with a mean basin-wide sedimentation rate of 30 m/m.y. Basin filling during this time seems to have been linked to slip reversal of the Red River Fault and collision of the North Palawan Block with the Luzon Arc. During the Pliocene and Pleistocene, sediments accumulated rapidly in the northeastern and southern East Sub-basin and the Southwest Sub-basin. The mean basin-wide sedimentation rate was 70 m/m.y. Basin filling during this phase seems to have been associated with the Taiwan and North Palawan collisions, SCS subduction along the Manila Trench, and Tibetan Plateau uplift. Gravity flow deposits predominate throughout the basin fill.