Seismic response of a cut‐and‐cover tunnel isolated by polymer material

An effective method for the seismic retrofitting of the sidewalls of cut‐and‐cover tunnels has not yet been established. Thus, a new method of seismic retrofitting for cut‐and‐cover tunnels, called the ‘polymer isolation method’, is developed here. In this method, thin walls made of polymer materials, called ‘isolation walls’, are inserted between the ground and the sidewalls of a tunnel. We demonstrate the effectiveness of the proposed method in reducing the seismic response of tunnels by using some numerical simulations. It is found that the proposed method depends on the thickness of the soil cover over the tunnel and the ratio of the stiffness between the soil and the structure. Furthermore, a simple chart is proposed for convenience to represent the applicability of the polymer isolation method to the design of seismic retrofits for cut‐and‐cover tunnels. Although this particular chart has been obtained through a limited case, some other typical cases in which the chart can also be implemented for special conditions are addressed, and the applicability and the limitations of this chart are suggested for possible conditions of the ground and of tunnel structures. Copyright © 2012 John Wiley & Sons, Ltd.     

Distribution of ephyrae and polyps of jellyfish <Emphasis Type="Italic">Aurelia</Emphasis><Emphasis Type="Italic">aurita</Emphasis> (Linnaeus 1758) <Emphasis Type="Italic">sensu lato</Emphasis> in Mikawa Bay,Japan

We surveyed the distribution of colonies of polyps of Aurelia aurita sensu lato (s.l.) in Mikawa Bay, Japan. First, we surveyed the distribution of ephyrae of A. aurita s.l. at 75 stations encompassing the whole of Mikawa Bay in early 2008. A total of 37 ephyrae were sampled mostly from fishing ports. Ephyrae were most abundant around the islands located near the mouth of the bay, and decreased from the western part to the eastern part of Mikawa Bay. Next, we selected five fishing ports in Mikawa Bay where ephyrae occurred and surveyed the underside of floating piers and underwater overhangs of wharfs. We found dense colonies of polyps of A. aurita s.l. under nearly all of the floating piers at the two islands located near the mouth of the bay. Fitting a logistic regression model to the dataset showed that the percentage coverage of Aurelia polyps was significantly greater at the two islands compared with the other locations. In addition, the coverage of Aurelia polyps was greater when the coverage of other fouling organisms was in the range of 65–90%, and the coverage of Aurelia polyps was lower on floating piers with a vinyl surface and on concrete wharfs. The combined distribution of polyp colonies of A. aurita s.l. in Ise Bay and Mikawa Bay suggested that A. aurita s.l. in the two bays probably forms a single population and shoals of medusae mainly originate from protected harbors along the mouth-part of the bays.     

Level of electrostatic excitation associated with relativistic beam-plasma system and pulsar radiation

A class of pulsar models which provide a stationary beam-plasma system as the source of radiation is considered. Since the beam-plasma system is stable near the pulsar where the coherent curvature radiation damps the longitudinal mode, we consider the beam-plasma system away from the star so that the effects of curvature radiation may be neglected. We find that the total wave energy density may attain a significant fraction of the beam energy density provided that the beam and plasma carry away a comparable amount of energy from the star. It should be noted that the attained high wave energy density is peculiar to a relativistic beam-plasma interaction.     

Computer simulation of fracturing of layered rock

Fracturing of rocks is simulated using an electronic computer, on the assumption that when a stress acts on a model, the fracturing condition is determined according to Mohr's theory and that of Griffith. A rock body is regarded as an aggregate of a grid cell whose strength is expressed by a random number of Gaussian distribution functions and the layered fabric of the rock body is given by inserting layered parts with different strength and with various inclinations. The results displaying the fractures on the grid system suggest that some of the geologic structures such as the echelon or the zigzag pattern of fracture are ascribed to fracturing in a layered or heterogeneous body, and variation of strength and the presence of layered fabric in a rock have a significant influence on fracture patterns developed in the rock.     

Color measurements of volcanic ash deposits from three different styles of summit activity at Sakurajima volcano,Japan: Conduit processes recorded in color of volcanic ash

We measured quantitatively colors of volcanic ash deposits erupted from three different styles of summit activity (Strombolian activity, Vulcanian explosions and continuous ash venting activity) at Sakurajima volcano from 1974 to 1985. Colors of Strombolian ash samples have larger yellow components of their visible spectra (b^? values) than those of explosion and continuous venting ash samples. Colors of explosion ash samples show larger variation in both red and yellow components of their visible spectra (a^? and b^? values, respectively), while colors of continuous venting ash samples are in the narrow ranges within colors of explosion ash samples. Colors of components with lower densities than 3.1 g/cm³ (groundmass and phenocrystic plagioclase) obtained by magnetic and heavy liquid separation methods are similar to the unseparated bulk ash samples. This result suggests that the color variations of ash deposits are mainly originated from the particles composed of groundmass. The particles can be classified into three different types of particles with different vesicularity and crystallinity (vesicular particle [VP], dense particle with vesicles [DPV] and dense particle without vesicles [DP]). Analytical results of component proportions, chemical compositions of groundmass glasses, ferrous iron contents and surface ferric materials show that (1) VP has larger yellow components of the visible spectrum (b^? values) and high ferrous iron content, and is less crystallized than the DP and DPV, (2) DP has larger red and yellow components of its visible spectrum (a^? and b^? values, respectively) and involves ferric materials on the surfaces produced by oxidation process, and (3) DPV has smaller red and yellow components of its visible spectrum (a^? and b^? values, respectively) and involves less ferric materials on the ash surfaces. Color differences of ash deposits from three different activity styles can be explained by the different mixing ratios of VP, DPV and DP. During the Strombolian activity, the VP is a main component in the ash, which is formed from relatively less degassed and crystallized magma. In the Vulcanian explosion and continuous ash venting activity, the proportions of DPV and DP in ash are larger than that in the Strombolian activity. The highly crystallized DP may correspond to a vent cap, and DPV to a magma below the cap. The color measurements of ash deposits provide information on the pre-eruptive processes at the shallower levels of a conduit.     

Petrogenesis of the Kaikomagatake granitoid pluton in the Izu Collision Zone, central Japan: implications for transformation of juvenile oceanic arc into mature continental crust

The Miocene Kaikomagatake pluton is one of the Neogene granitoid plutons exposed in the Izu Collision Zone, which is where the juvenile Izu-Bonin oceanic arc is colliding against the mature Honshu arc. The pluton intrudes into the Cretaceous to Paleogene Shimanto accretionary complex of the Honshu arc along the Itoigawa-Shizuoka Tectonic Line, which is the collisional boundary between the two arcs. The pluton consists of hornblende–biotite granodiorite and biotite monzogranite, and has SiO₂ contents of 68–75 wt%. It has high-K series compositions, and its incompatible element abundances are comparable to the average upper continental crust. Major and trace element compositions of the pluton show well-defined chemical trends. The trends can be interpreted with a crystal fractionation model involving the removal of plagioclase, biotite, hornblende, quartz, apatite, and zircon from a potential parent magma with a composition of ~68 wt% SiO₂. The Sr isotopic compositions, together with the partial melting modeling results, suggest that the parent magma is derived by ~53% melting of a hybrid lower crustal source comprising ~30% Shimanto metasedimentary rocks of the Honshu arc and ~70% K-enriched basaltic rocks of the Izu-Bonin rear-arc region. Together with previous studies on the Izu Collision Zone granitoid plutons, the results of this study suggest that the chemical diversity within the parental magmas of the granitoid plutons reflects the chemical variation of basaltic sources (i.e., across-arc chemical variation in the Izu-Bonin arc), as well as a variable contribution of the metasedimentary component in the lower crustal source regions. In addition, the petrogenetic models of the Izu Collision Zone granitoid plutons collectively suggest that the contribution of the metasedimentary component is required to produce granitoid magma with compositions comparable to the average upper continental crust. The Izu Collision Zone plutons provide an exceptional example of the transformation of a juvenile oceanic arc into mature continental crust.     

Garnet-amphibolites at Yokokawa in the Abukuma metamorphic belt,Japan

The mineralogy and petrochemistry of the garnet-amphibolites from the highgrade part of the Abukuma metamorphic belt have been studied, using five analyses of rocks, five of hornblendes, three of garnets and one analysis of cummingtonite, Garnetiferous amphibolites are rich in Fe, whereas non-garnetiferous ones are rich in Mg, especially in cummingtonite-amphibolite. The chemical composition of hornblendes associated with garnet is pargasitic and rich in FeO and poor in CaO, but that of non-garnetiferous rocks is rich in MgO. The garnets are rich in almandine molecule. Mg/Mg + Fe²⁺ ratios of both hornblendes and garnets correspond with those of the host rocks. The development of garnet in the Adirondack metabasites belonging to the upper almandine-amphibolite and granulite facies is observed in Mg-rich rocks as well as in Fe-rich rocks, in which both garnet and hornblende are rich in Mg respectively. However, under the conditions of the andalusite-sillimanite type metamorphism as shown in the Abukuma Plateau, Fe-rich garnet occurs in Fe-rich basic rocks, but cummingtonite occurs in Mg-rich ones instead of Mg-rich garnet. Finally, the problem of polymetamorphism is discussed. The cummingtonite-amphibolite may be the product of polymetamorphism, and Mg-rich garnet which had been present previously was decomposed to cummingtonite and plagioclase by the subsequent regional metamorphism of andalusite-sillimanite type.     

A study of rock alteration process based on kinetics of hydrothermal experiment

Experimental investigation was made on hydrothermal alteration of sericite in acid solution. It is found that the sericite is changed to pyrophyllite through kaolinite at 270° C and 260° C, and the alteration is considered to be a consecutive reaction involving two steps, from sericite to kaolinite and from kaolinite to pyrophyllite. On the other hand, pyrophyllite is not formed at 190° C and the sericite is altered to kaolinite. The rate of reaction in each step of this hydrothermal alteration is dependent on reaction temperature and chemical composition of the solution. From the results of the quantitative analyses of the experimental products, kinetic constants and related parameters were obtained.By using these numerical values, an alteration process can be followed in a given model. Computed results for some cases of an alteration of sericite in acid solution are presented. Geological phenomena such as rock alteration or weathering are thought to progress in a disequilibrium state and in an open system. An attempt described in this paper is a physicochemical approach to treat an alteration process accompanied with material transfer occurring in an open system from a kientic viewpoint.     

Chemical and structural characterization of As immobilization by nanoparticles of mackinawite (FeSm)

The mobility and availability of arsenite, As(III), in anoxic environments is largely controlled by adsorption onto iron sulfides and/or precipitation of arsenic in solid phases. The interaction of As(III) with synthetic mackinawite (FeS_m) in pH 5 and 9 suspensions was investigated using high-angle annular dark field (HAADF) scanning transmission electron microscopy (STEM), STEM elemental mapping, high resolution TEM, and X-ray photoelectron spectroscopy (XPS). At pH 5, arsenic sulfide phases precipitate among the FeS_m particles as discrete particles that are an amorphous hydrous phase of arsenic sulfide. The oxidation state of As in the surface layers of the arsenic sulfide precipitates is ‘realgar-like’ based on XPS results showing that > 75% of the As 3d peak area is due to As with oxidation states between 0 and 2+. Discrete, arsenic sulfide precipitates are absent at pH 9, but elemental mapping in STEM-EDX mode shows that arsenic is uniformly distributed on the FeS_m, suggesting that uptake is caused by the sorption of As(III) oxyanions and/or the precipitation of highly dispersed arsenic sulfides on FeS_m. XPS also revealed that the FeS_m that equilibrated without As(III) has a more oxidized surface composition than the sample at pH 9, as indicated by the higher concentration of O ( three times greater than that at pH 9) and the larger fraction of Fe(III) species making up the total Fe (2p_3/2) peak. These findings provide a better understanding of redox processes and phase transitions upon As(III) adsorption on iron sulfide substrates.