The earliest stage of Izu rear‐arc volcanism revealed by drilling at Site U1437, International Ocean Discovery Program Expedition 350

The International Ocean Discovery Program Expedition 350 drilled between two Izu rear‐arc seamount chains at Site U1437 and recovered the first complete succession of rear‐arc rocks. The drilling reached 1806.5 m below seafloor. In situ hyaloclastites, which had erupted before the rear‐arc seamounts came into existence at this site, were recovered in the deepest part of the hole (～15–16 Ma). Here it is found that the composition of the oldest rocks recovered does not have rear‐arc seamount chain geochemical signatures, but instead shows affinities with volcanic front or some of the extensional zone basalts between the present volcanic front and the rear‐arc seamount chains. It is suggested that following the opening of the Shikoku back‐arc Basin, Site U1437 was a volcanic front or a rifting zone just behind the volcanic front, and was followed at ~ 9 Ma by the start of rear‐arc seamount chains volcanism. This geochemical change records variations in the subduction components with time, which might have followed eastward moving of hot fingers in the mantle wedge and deepening of the subducting slab below Site U1437 after the cessation of Shikoku back‐arc Basin opening.     

Nishinoshima volcano in the Ogasawara Arc: New continent from the ocean?

Nishinoshima, a submarine volcano in the Ogasawara Arc, approximately 1 000 km south of Tokyo, Japan, suddenly erupted in November 2013, after 40 years of dormancy. Olivine‐bearing phenocryst‐poor andesites found in older submarine lavas from the flanks of the volcano have been used to develop a model for the genesis of andesitic lavas from Nishinoshima. In this model, primary andesite magmas originate directly from the mantle as a result of shallow and hydrous melting of plagioclase peridotites. Thus, it only operates beneath Nishinoshima and submarine volcanoes in the Ogasawara Arc and other oceanic arcs, where the crust is thin. The primary magma compositions have changed from basalt, produced at considerable depth, to andesite, produced beneath the existing thinner crust at this location in the arc. This reflects the thermal and mechanical evolution of the mantle wedge and the overlying lithosphere. It is suggested that continental crust‐like andesitic magma builds up beneath submarine volcanoes on thin arc lithosphere today, and has built up beneath such volcanoes in the past. Andesites produced by this shallow and hydrous melting of the mantle could accumulate through collisions of plates to generate continental crust.     

Growth stimulation and inhibition of natural phytoplankton communities by model organic ligands in the western subarctic Pacific

The influence of organic ligands on natural phytoplankton growth was investigated in high-nitrate low-chlorophyll (HNLC) waters and during a phytoplankton bloom induced by a mesoscale iron enrichment experiment (SEEDS II) in the western subarctic Pacific. The growth responses of the phytoplankton in the treatments with iron complexed with model ligand were compared with those with inorganic iron or a control. Desferrioxamine B and protoporphyrin IX were used as models for hydroxamate-type siderophore and tetrapyrrole-type cell breakdown ligand, respectively. In the HNLC water, iron associated with protoporphyrin IX especially stimulated smaller phytoplankton (<10 μm) growth, 1.5-fold more than did inorganic iron. Surprisingly, only the addition of protoporphyrin IX stimulated small phytoplankton growth, suggesting that these cell breakdown ligands might be more bioavailable for them. The protoporphyrin IX’s stimulatory effect on small phytoplankton was not observed during bloom decline phase. The growth of phytoplankton was inhibited in the treatment with desferrioxamine B-complexed iron, suggesting its low bioavailability for the natural phytoplankton community. Its inhibitory effects were particularly pronounced in pico-eukaryotic phytoplankton. During the iron-induced bloom, the phytoplankton’s iron-stress response gradually increased with the desferrioxamine B concentration, suggesting that the competition for iron complexation between natural ligands and desferrioxamine B affected phytoplankton growth. However, the pico-eukaryotes did seem better able to utilize the desferrioxamine B-complexed iron during the bloom-developing phase. These results indicate that the iron bioavailability for phytoplankton differs between bloom-developing and bloom-decline phases.     

Re-Suspension Technique for Improving Organic Rich Sediment-Water Quality in a Shallow Sea Area

The re-suspension method consists of (1) dispersion of the sediment by air-water jets, (2) pumping of the suspension (small particles and organic matter), (3) settlement in a tank, (4) filtration and (5) disposal of solids (followed by incineration in this case). The pilot test was performed to clean up an area of 3000 m². The dispersed depth of the bottom was approximately 50 cm. The time spent for the work was two weeks. The amount of re-suspended solid removed from the bottom was about 8 tonnes in dry mass. Since the solids contain high concentrations of chemical oxygen demand (COD), total phosphorous (T-P), total nitrogen (T-N) and sulfides, the remaining sediment was considerably improved. Quantitative analyses showed that the full-scale implementation would enable the removal of about 10% of the re-suspended solids, and reduce COD by 95%, T-P by 50%, T-N by 100% and sulfide by 75% for re-deposited sediments in comparison to the original sediments.     

A Late Cretaceous mammalian dentary from the Ashizawa Formation (Futaba Group), Fukushima,northeastern Japan

A mammalian dentary discovered in the Coniacian Ashizawa Formation (Fukushima, northeastern Japan) is described. The specimen is a fragment of the horizontal ramus of a left edentulous dentary with five alveoli, the distal four of which are plugged with broken roots. Based on the morphologies of the dentary and the roots, it is considered to be of a therian mammal. This constitutes the first discovery of a Mesozoic mammal in northeastern Japan and highlights the potential for future mammal discoveries in the Cretaceous System in northeastern Japan, which will be significant for disclosure of the mammalian faunal evolution in East Asia during the Late Cretaceous.     

Predicting the displacement of triple pendulum™ bearings in a full‐scale shaking experiment using a three‐dimensional element

The accuracy of a series spring model to predict the peak displacement and displacement history of Triple Pendulum? (TP) bearings in a strongly shaken, full‐scale building is evaluated in this paper. The series spring model was implemented as a self‐contained three‐dimensional TP bearing element in OpenSees and is now available for general use. The TP bearing element contains the option for constant friction or a generalized friction model that accounts for the effect of instantaneous velocity and compression load on the friction coefficient. Comparison between numerical simulation and experimental data of a five‐story steel moment frame building shows that the peak displacement of isolation system can generally be predicted with confidence using a constant friction coefficient model. The friction coefficient model accounting for the effect of axial load and velocity leads to minor improvement over the constant friction coefficient models in some cases. Copyright © 2013 John Wiley & Sons, Ltd.     

Full‐scale shaking table test of a base‐isolated medical facility subjected to vertical motions

Base isolation is a well known technology that has been proven to reduce structural response to horizontal ground accelerations. However, vertical response still remains a topic of concern for base‐isolated buildings, perhaps more so than in fixed‐base buildings as isolation is often used when high performance is required. To investigate the effects of vertical response on building contents and nonstructural components, a series of full‐scale shaking table tests were conducted at the E‐Defense facility in Japan. A four‐story base‐isolated reinforced concrete building was outfitted as a medical facility with a wide variety of contents, and the behavior of the contents was observed. The rubber base isolation system was found to significantly amplify vertical accelerations in some cases. However, the damage caused by the vertical ground motions was not detrimental when peak vertical floor accelerations remained below 2 g with three exceptions: (1) small items placed on shelves slid or toppled; (2) objects jumped when placed on nonrigid furniture, which tended to increase the response; and (3) equipment with vertical eccentricities rocked and jumped. In these tests, all equipment and nonstructural components remained functional after shaking. Copyright © 2013 John Wiley & Sons, Ltd.     

The 11 March 2011 Tohoku Tsunami Survey in Rikuzentakata and Comparison with Historical Events

On 11 March 2011, a moment magnitude M _w = 9.0 earthquake occurred off the Japan Tohoku coast causing catastrophic damage and loss of human lives. In the immediate aftermath of the earthquake, we conducted the reconnaissance survey in the city of Rikuzentakata, Japan. In comparison with three previous historical tsunamis impacting the same region, the 2011 event presented the largest values with respect to the tsunami height, the inundation area and the inundation distance. A representative tsunami height of 15 m was recorded in Rikuzentakata, with increased heights of 20 m around rocky headlands. In terms of the inundation area, the 2011 Tohoku tsunami exceeded by almost 2.6 times the area flooded by the 1960 Chilean tsunami, which ranks second among the four events compared. The maximum tsunami inundation distance was 8.1 km along the Kesen River, exceeding the 1933 Showa and 1960 Chilean tsunami inundations by factors of 6.2 and 2.7, respectively. The overland tsunami inundation distance was less than 2 km. The tsunami inundation height linearly decreased along the Kesen River at a rate of approximately 1 m/km. Nevertheless, the measured inland tsunami heights exhibit significant variations on local and regional scales. A designated “tsunami control forest” planted with a cross-shore width of about 200 m along a 2 km stretch of Rikuzentakata coastline was completely overrun and failed to protect the local community during this extreme event. Similarly, many designated tsunami shelters were too low and were overwashed by tsunami waves, thereby failing to provide shelter for evacuees—a risk that had been underestimated.     

Sedimentary Crust and Metallogeny of Granitoid Affinity: Implications from the Geotectonic Histories of the Circum‐Japan Sea Region,Central Andes and Southeastern Australia

Metallogeny of granitoid affinity was reviewed from the aspect of geotectonic history of the continental crust, particularly of the genesis of sedimentary crust involved in magmatism. The redox state of granitoids and related mineralization shows a remarkable contrast between the east and west sides of the Pacific Rim, but if examined closely, the reduced‐type and oxidized‐type granitoid provinces are juxtaposed in three regions: the circum‐Japan Sea region, the central Andes, and the Lachlan Fold Belt in southeastern Australia. Comparative study of these regions revealed that the reduced‐type magmatism associated with Sn mineralization generated in thick sedimentary crust which formed in three geotectonic environments: (i) accretionary terrane along a subduction zone (e.g. Jurassic East Asia), (ii) continental rift (e.g. Early Paleozoic Andes), and (iii) mega‐fan (e.g. Early Paleozoic southeastern Australia). A collisional orogen can provide large amounts of clastic sediment to these environments. The age gap between the magmatism and sedimentation varies depending on the tectonic evolution of individual regions. Thin sedimentary crust may not play an essential role for the reduced‐type magmatism. The oxidized‐type magmatism associated with porphyry Cu and other mineralization generated in the crust which was initially carbon‐free igneous crust or modified from sedimentary crust by magmatism. Subduction‐related basaltic magmas are relatively oxidized, and may enhance fO₂ conditions of granitoid activity. Repeated magmatism in a monotonous convergent margin may be favorable for porphyry Cu mineralization as exemplified in the eastern Pacific Rim.