230Th/234U and 14C dating of a lowstand coral reef beneath the insular shelf off Irabu Island, Ryukyus, southwestern Japan

Abstract   High-resolution seismic reflection profiles delineated the distribution of mound-shaped reflections, which were interpreted as reefs, beneath the insular shelf western off Irabu Island, Ryukyus, southwestern Japan. A sediment core through one of the mounded structures was recovered from the sea floor at a depth of −118.2 m by offshore drilling and was dated by radiometric methods. The lithology and coral fauna of the core indicate that the mounded structure was composed of coral–algal boundstone suggesting a small-scaled coral reef. High-precision α-spectrometric ²³⁰Th/²³⁴U dating coupled with calibrated accelerator mass spectrometric ¹⁴C ages of corals obtained reliable ages of this reef ranging from 22.18 ± 0.63 to 30.47 ± 0.98 ka. This proves that such a submerged reef was formed during the lowstand stage of marine oxygen isotope stages 3–2. The existence of low-Mg calcite in the aragonitic coral skeleton of 22.18 ± 0.63 ka provides evidence that the reef had once been exposed by lowering of the relative sealevel to at least −126 m during the last glacial maximum in the study area. There is no room for doubt that a coral reef grew during the last glacial period on the shelf off Irabu Island of Ryukyus in the subtropical region of western Pacific.     

Fracture Toughness Evaluation Based on Tension-softening Model and its Application to Hydraulic Fracturing

This paper discusses the applicability of the tension-softening model in the determination of the fracture toughness of rocks, where the fracture toughness evaluated based on the tension-softening model is compared with the crack growth resistance deduced from laboratory-scale hydraulic fracturing tests. It is generally accepted that the fracture process is dominated by the growth of a fracture process zone for most types of rocks. In this study, the J-integral based technique is employed to determine the fracture toughness of Iidate granite on the basis of the tension-softening model, where compact tension specimens of different dimensions were tested in order to examine the specimen size effect on the measured fracture toughness. It was shown that the tension-softening relation deduced from the J-integral based technique allowed us to determine the specimen size independent fracture toughness K_c of Iidate granite. Laboratory-scale hydraulic fracturing tests were performed on cubic specimens (up to a 10 m sized specimen), where cyclic pressurization was conducted using a rubber-made straddle packer to observe the extent of the hydraulically induced crack. The experimental results of pressure and crack length were then used to construct the crack growth resistance curve based on the stress intensity factor K. The crack growth resistance obtained from the hydraulic fracturing tests was observed to initially increase and then level off, giving a constant K value for a long crack extension stage. The plateau K value in the crack growth resistance curve was found to be in reasonable agreement with the fracture toughness K_c deduced from the tension-softening relation. It was demonstrated that the tension-softening model provides a useful tool to determine the appropriate fracture toughness of rocks, which may be applicable for the analysis of the process of large-scale crack extension in rock masses.     

Analysis of a guided wave along a conducting structure in a borehole

A guided wave along a borehole is often observed in borehole radar measurements. These guided waves deform the antenna pattern and can cause artefacts in radar measurements. A water-filled borehole or a conducting logging cable can function as a waveguide for electromagnetic waves under some conditions. We describe the theoretical characteristics of such a guided wave in a borehole and compare them with our experiments. The measured signal discussed was obtained with a directional borehole radar. This radar uses a cylindrical conformal array antenna as receiver and is a model of a conducting structure in a borehole. The induced field around the borehole was compared with the theory. The most fundamental symmetrical and asymmetrical modes were TM₀₁ and HE₁₁, and they were identified in the measured signals using time–frequency distribution analysis and by observation of the azimuthal field distribution of the magnetic field.     

Three-dimensional Mapping of Magma Source and Transport Regions from Seismic Data: The Mantle Wedge beneath Northeastern Japan

—We investigate the distribution of partial melt in island arc using the seismic velocity structure of the mantle wedge beneath northeastern Japan. The comparison of the seismic tomography with laboratory velocity data on a partially-molten mantle rock yields estimates of melting zones in three dimensions. We employ experimental data on the degree of partial melt in hydrous peridotite to give constraints on the melt fraction and temperature. Melting and magma-rich zones derived from the velocity structure coincide with observed low Q zones. The results of the three-dimensional mapping indicate that the source of magma in island arc is diapir-like melting patches localized within the low velocity zones of the mantle wedge. Extensive volcanic activity along the volcanic front is due to the presence of vast magma-rich zones just beneath the Moho. Those melting zones in the uppermost mantle may, in turn, cause melting of lower crustal materials and produce felsic magma. Melt appears to stay at and beneath the Moho, where crystallization fractionation may proceed. Melt exists at greater depths in the back-arc region, which may correlate with across-arc variations of chemical compositions of the volcanic rocks observed in northeastern Japan. We suggest that magma migration in the ductile lower crust may cause low-frequency microearthquakes, and magma penetration into the brittle upper crust may produce mid-crustal S-wave reflectors.     

The Holocene development of Kushu Lake on Rebun Island in Hokkaido, Japan

Diatom assemblages and sulfur content in sediments were analyzed to clarify changes in the sedimentary environment of Kushu Lake, a coastal lake on Rebun Island in Hokkaido, Japan. Salinity variations were assessed by means of a diatom-based index of paleosalinity and the sedimentary sulfur content. This paper discusses the Holocene development of the lake, in relation to Holocene relative sea-level change. For paleoenvironmental interpretation of the lake development, the rationale of the threshold method (Anundsen et al., 1994) was applied.At ca. 8000 yr BP, a coastal embayment (paleo-Kushu Bay) resulted from marine ingression. The threshold elevation at the mouth of the paleo-Kushu Bay kept pace with the rising sea-level, resulting in its enclosure at the culmination of Holocene marine transgression (ca. 6500–5000 yr BP). From predicted relative sea-level at ca. 6000 yr BP for Rebun Island (Nakada et al., 1991), the threshold may have been at least above –3 to –5 m altitude. A freshwater lake environment with strongly anoxic bottom conditions may have occurred from ca. 5500 to 5100 yr BP. After an important episode of marine ingression, the lake was isolated completely from the open sea at ca. 4900 yr BP. The diatom record suggests that the maximum lacustrine extent occurred at ca. 4900–3100 yr BP. Thereafter, water depth decreased at the lake margins.In Kushu Lake, the threshold elevation, due to a build-up of a coastal barrier, prevents us from determining the amplitude of sea-level changes, even though the age of isolation contacts corresponds to periods of regression and climatic deterioration. In spite of isostatic subsidence, the effective protection provided by the well-developed barrier did not allow registration of any relative sea-level fluctuations since its isolation.     

Element partitioning between metallic liquid, silicate liquid, and lower-mantle minerals: implications for core formation of the Earth

We determined the partition coefficients of 19 elements between metallic liquid and silicate liquid at 20 GPa and 2500°C, and between metallic liquid and silicate perovskite at 27 GPa and 2200°C. Remarkable differences were observed in the partitioning behaviors of Si, P, W, Re, and Pb among the silicate liquid, perovskite, and magnesiowüstite coexisting with metallic liquid, reflecting incompatibility of the elements in the silicate or oxide phase. We could not observe any significant difference in the partitioning behaviors of V, Cr, Mn, Co, Ni, and Cu among the phases coexisting with metallic liquid.

Comparison of the present partitioning data with those obtained previously at lower pressure and temperature suggests that the exchange partition coefficients, K_met/sil, of Co, Ni, Mo, and W decrease, whereas those of V, Cr, and Mn increase and tend to approach unity with increasing pressure and temperature. We also made preliminary experiments to clarify the effect of sulfur on the partitioning behaviors. Sulfur lowers the exchange partition coefficients, K_met/sil, of Mo and W between metallic liquid and silicate liquid significantly at 20 GPa and 2300°C.

The mantle abundances of Co, Ni, Cu, Mo, and W calculated for the metal-silicate equilibrium model are lower than those of the real mantle, whereas P, K, and Mn are overabundant in the calculated mantle. The discrepancies in the abundances of Co and Ni could be explained by the chemical equilibrium at higher pressure and temperature. Large discrepancies in Mo and W between the calculated and real mantles could be accounted for by the effect of sulfur combined with the effects of pressure and temperature on the chemical equilibrium. The mantle abundances of P, K, and Cu could be accounted for by volatile loss in the nebula, perhaps before accretion of the Earth, combined with the chemical equilibrium at higher pressure and temperature. Thus the observed mantle abundances of P, K, Co, Ni, Cu, Mo, and W may be consistent with a model of sulfur-bearing metal-silicate equilibrium in lower-mantle conditions.     

Crustal movement along a collision boundary of plates (case of eastern Taiwan)

Recent crustal movements in eastern Taiwan were investigated based on geodetic and seismological data as a case study of the tectonics along a colliding plate boundary. Secular horizontal strain along the Longitudinal Valley, a probable arc-continent collision boundary between the Philippine Sea and Eurasion plates, is compressive with a large rate of 2 microstrains/year, and the maximum compression axis trends in NW-SE direction. This means that nearly two-thirds of the convergence rate between the two plates is consumed in the narrow zone along the valley and confirms the view that the valley is the plate boundary between the two. The amount of uplift in the Central Range, deduced from trigonometric leveling, reaches more than one meter during the past 60 years. Such active orogeny is caused by the high strain rate in this area. Horizontal displacement of the Coastal Range, a leading edge of the Philippine Sea plate, has a left-lateral component, suggesting that the boundary is a region of oblique collision and the range moves toward the north, producing subduction of the Philippine Sea plate off the Coast of northeastern Taiwan.An extensional strain pattern is found northeastern Taiwan near Hualien, in northern Taiwan near Ilan, and in southeastern Taiwan south Taitung. In northeastern Taiwan, the direction of the maximum extension axis is nearly parallel to the isodipth contours of deep-focus earthquakes that occurred under the southern part of the Ryukyu Trench. From a model calculation using a finite-element method, this pattern of strain is interpreted as an edge effect of the collision-subduction junction in northeastern Taiwan. The direction of the maximum extension in northern Taiwan forms high angles with the direction of the tectonic line near Ilan stretching from the Okinawa Trough. This fact is harmonious with the view that the Okinawa Trough is spreading. Extensional strain observed in southeastern Taiwan may be related to the eastward subduction since the area is situated on a transition zone, from collision to subduction.     

Temporal change in scattering and attenuation associated with the earthquake occurrence—A review of recent studies on coda waves

The study of coda waves has recently attracted increasing attention from seismologists. This is due to the fact that it is viewed as a new means by which the stress accumulation stage preceding a large earthquake can be measured, since the scattering paths nearly uniformly cover a fairly large region around the focus and observation stations, compared with the direct ray paths. To date, we have had many reports on the temporal variation of the relation between coda duration and amplitude magnitude, and that of the coda attenuationQ _c ^–1 which is estimated from coda amplitude decay. Some of these have shown a precursor-like behavior; however, others seem to have shown a coseismic change. We have critically reviewed these reports, and discussed what these observational facts tell us about the change in the heterogeneous crust. We found significant temporal variations, not only in the mean but also in the scatter ofQ _c ^–1 , associated with the mainshock occurrence. The formation of new cracks, the reopening and growing of existing cracks, the interaction of these cracks, and the pore water movement through these cracks might correspond to such variations. In addition, we may expect an inhomogeneous distribution of crack clusters in a fairly large region, compared with the aftershock region. The gradual appearance of such crack clusters seems to be the most plausible mechanism by which coda decay gradients are caused to largely scatter in the stress accumulation stage.     

Partitioning of elements between majorite garnet and melt and implications for petrogenesis of komatiite

Partitioning of elements between majorite garnet and ultrabasic melt has been studied at 16 GPa and 1950° C. Ca, Ti, La, Sm, Gd, Zr, Hf, Fe, Ni, Mn, K, and Na are enriched in the melt, whereas Al, Cr, V, Sc and Yb are concentrated in majorite garnet. Thus, majorite garnet fractionation by partial melting could produce chemical heterogeneities in these elements deviating from chondritic abundance. Using the partitioning behaviour of elements between majorite garnet and ultrabasic melt, the petrogenesis of komatiite is discussed. A simple model to explain the chemical varieties of komatiites is as follows. Aluminadepleted komatiite was generated by partial melting of the primitive mantle at 200–650 km depth, and alumina-enriched komatiite is the product of remelting of the residual solid at the same depths, whereas alumina-undepleted komatiite was formed by partial melting of the primitive upper mantle at depths shallower than 200 km. We suggest the possibility of large-scale chemical layering or heterogeneity in the early Archean upper mantle as an alternative model for komatiite genesis; shallower mantle depleted in majorite garnet and the underlying mantle enriched in majorite garnet. Alumina-depleted and alumina-enriched komatiites in the early Archean might be generated by a high degree of partial melting of the layered mantle. Such chemical layering could have been homogenized by the late Archean. This explains the observations that alumina-depleted and alumina-enriched komatiites were generally formed in the early Archean but alumina-undepleted komatiite was erupted in the late Archean.