Early In-orbit Performance of Scanning Sky Monitor Onboard AstroSat

We report the in-orbit performance of Scanning Sky Monitor (SSM) onboard AstroSat. The SSM operates in the energy range 2.5 to 10 keV and scans the sky to detect and locate transient X-ray sources. This information of any interesting phenomenon in the X-ray sky as observed by SSM is provided to the astronomical community for follow-up observations. Following the launch of AstroSat on 28th September, 2015, SSM was commissioned on October 12th, 2015. The first power ON of the instrument was with the standard X-ray source, Crab in the field-of-view. The first orbit data revealed the basic expected performance of one of the detectors of SSM, SSM1. Following this in the subsequent orbits, the other detectors were also powered ON to find them perform in good health. Quick checks of the data from the first few orbits revealed that the instrument performed with the expected angular resolution of 12’ \(\times \) 2.5\(^\circ \) and effective area in the energy range of interest. This paper discusses the instrument aspects along with few on-board results immediately after power ON.     

Delineation of the 85°E ridge and its structure in the Mahanadi Offshore Basin,Eastern Continental Margin of India (ECMI), from seismic reflection imaging

The passive Eastern Continental Margin of India (ECMI) evolved during the break up of India and East Antarctica in the Early Cretaceous. The 85°E ridge is a prominent linear aseismic feature extending from the Afanasy Nikitin Seamounts northward to the Mahanadi basin along the ECMI. Earlier workers have interpreted the ridge to be a prominent hot spot trail. In the absence of conclusive data, the extension of the ridge towards its northern extremity below the thick Bengal Fan sediments was a matter of postulation. In the present study, interpretation of high resolution 2-D reflection data from the Mahanadi Offshore Basin, located in the northern part of the ridge, unequivocally indicates continuation of the ridge across the continent–ocean boundary into the slope and shelf tracts of the ECMI. Its morphology and internal architecture suggest a volcanic plume related origin that can be correlated with the activity of the Kerguelen hot spot in the nascent Indian Ocean. In the continental region, the plume related volcanic activity appears to have obliterated all seismic features typical of continental crust. The deeper oceanic crust, over which the hot spot plume erupted, shows the presence of linear NS aligned basement highs, corresponding with the ridge, underlain by a depressed Moho discontinuity. In the deep oceanic basin, the ridge influences the sediment dispersal pattern from the Early Cretaceous (?)/early part of Late Cretaceous times till the end of Oligocene, which is an important aspect for understanding the hydrocarbon potential of the basin.     

Assessing integrated assessments

Integrated assessment of global environmental change is a relatively new field that is beginning to define itself and its forms of practice. As yet, the field has not grappled directly with issues of quality control and assessment of quality, and this work is a first attempt in that direction. We argue that if integrated assessment is to be successful in the long run, then building and maintaining credibility via quality control procedures is a necessary condition for realizing its potential. We highlight a number of pitfalls in the practice of integrated assessment, and discuss their causes. We buttress our concerns using examples from both within climate change integrated assessment, and from the history of other similar endeavors. We also provide a number of suggestions that we hope will serve to alleviate some of these pitfalls. For instance, tools, methods, and assumptions from disciplines form archetypes for components in integrated assessment models, and we need to apply greater scrutiny to these archetypes. Further, tools which may be reasonable to use in particular disciplinary, geographical, or temporal contexts may be unsuited to the broader contexts inherent in integrated assessment studies of global environmental change.     

Modelling considerations in probabilistic performance‐based seismic evaluation: case study of the I‐880 viaduct

Limitations associated with deterministic methods to quantify demands and develop rational acceptance criteria have led to the emergence of probabilistic procedures in performance‐based seismic engineering. The Pacific Earthquake Engineering Research performance‐based methodology is one such approach. In this paper, the impact of certain modelling decisions made at different stages of the evaluation process on the performance assessment of a typical multi‐bent viaduct is examined. Modelling, in the context of this paper, covers hazard modelling, structural modelling and loss modelling. The specific application considered in this study is a section of an existing viaduct in California: the I‐880 interstate highway. Several simulation models of the viaduct are developed, a series of nonlinear time‐history analyses are carried out to predict demands, measures of damage are evaluated and the probability of closure of the viaduct is estimated using the specified hazard for the site. It is concluded that the methodology offers several advantages over existing deterministic performance‐based procedures. Results of the investigation indicate that the assessment methodology is particularly sensitive to the reliability of decisions made by bridge inspectors following a seismic event, and to the dispersion in the demand estimation, which in turn is influenced by several factors including soil–structure interaction effects and ground motion scaling procedures. Copyright © 2005 John Wiley & Sons, Ltd.     

Changes in major element hydrochemistry of the Pecos River in the American Southwest since 1935

The Pecos River, situated in eastern New Mexico and western Texas, receives water from a drainage area of 91 000 km². There are primarily two major water inputs, namely snowmelt from winter storms in the headwater region of the southern Rocky Mountains and runoff from warm-season monsoonal rainfall in the lower valley. The Pecos River suffers from high levels of total dissolved solids (TDS >5000 mg L⁻¹) under normal flow conditions. This not only poses serious problems for agricultural irrigation and safe drinking water supply, but also results in a permanent loss of biodiversity. This study examines changes in stream flow and water chemistry of the Pecos River over the last 70 a to better understand the long-term variability in stream salinity and the role of agricultural practices in salt transfer. A TDS record from the lower Pecos River near Langtry (Texas) back to 1935 was extracted to show a distinct pattern of decadal variability similar to the Pacific Decadal Oscillation (PDO), in which stream salinity is overall above average when the PDO is in positive (warm) phase and below average when the PDO is in negative (cold) phase. This is due to: (1) the dissolved salts contributed to the river are largely from dissolution of NaCl and CaSO₄-bearing minerals (e.g., halite and gypsum) in the upper basin, (2) the amount of the dissolved salts that reach the lower basin is mainly determined by the stream flow yield in the upper basin and (3) the stream flow yield from the upper basin is positively correlated with the PDO index. This further attests that large-scale climatic oscillation is the major source of long-term changes in stream flow and salinity of the Pecos River. On the other hand, there is also a strong indication that the rate of salt export has been affected by reservoir operations and water diversions for agricultural practices.     

Comparison of Near Coastal Significant Wave Height Measurements from SARAL/AltiKa with Wave Rider Buoys in the Indian Region

Significant Wave Height (SWH) measurement data from the AltiKa Radar Altimeter (RA) for the first 13 cycles of satellite coverage are compared with the SWH from Wave Rider Buoys (WRB) located at nine stations along the Indian coast to assess the performance of the altimeter over the coastal region. AltiKa SWH observations within a 30-minute interval and 50 km distance from WRBs are found to be over estimated by 6%, the Root Mean Square Error (RMSE) is 0.36 m, the Scatter Index (SI) is 26%, and the correlation coefficient (r) is 0.91. Relaxing the distance criteria by 50 km leads to increase in RMSE and deterioration of r to 0.89. There is a marked difference in the statistics on the comparison pairs pooled separately for the buoys near west and east coasts, with the latter showing RMSE error 26% more than the former. The method of Cressman weights adopted to correct for the errors arising out of the temporal and spatial differences in altimeter and buoy data comparison pairs resulted in reduction of RMSE by 5% and 25%, respectively, for the 30-minute and 50 km criteria and 4% and 56% for the 30-minute and 100 km criteria.     

Study of the Cosmic-Ray Modulation During the Passage of ICMEs and CIRs

We compare the cosmic-ray response to interplanetary coronal mass ejections (ICMEs) and corotating interaction regions (CIRs) during their passage in near-Earth space. We study the relative importance of various structures/features identified during the passage of the ICMEs and CIRs observed during Cycle 23 (1995?–?2009). The identified ICME structures are the shock front, the sheath, and the CME ejecta. We isolate the shock arrival time, the passage of the sheath region, the arrival of ejecta, and the end time of their passage. Similarly, we isolate the CIR arrival, the associated forward shock, the stream interface, and the reverse shock during the passage of a CIR. For the cosmic-ray intensity, we utilize the data from high counting rate neutron monitors. In addition to neutron monitor data, we utilize near-simultaneous and same time-resolution data of interplanetary plasma and field, namely the solar-wind velocity, the interplanetary magnetic field (IMF) vector, and its variance. Further, we also utilize some derived interplanetary parameters. We apply the method of the superposed-epoch analysis. As the plasma and field properties are different during the passage of different structures, both in ICMEs and CIRs, we systematically vary the epoch time in our superposed-epoch analysis one by one. In this way, we study the role and effects of each of the identified individual structures/features during the passage of the ICMEs and CIRs. Relating the properties of various structures and the corresponding variations in plasma and field parameters with changes of the cosmic-ray intensity, we identify the relative importance of the plasma/field parameters in influencing the amplitude and time profiles of the cosmic-ray intensity variations during the passage of the ICMEs and CIRs.     

The oxygen isotope composition, petrology and geochemistry of mare basalts: Evidence for large-scale compositional variation in the lunar mantle

To investigate the formation and early evolution of the lunar mantle and crust we have analysed the oxygen isotopic composition, titanium content and modal mineralogy of a suite of lunar basalts. Our sample set included eight low-Ti basalts from the Apollo 12 and 15 collections, and 12 high-Ti basalts from Apollo 11 and 17 collections. In addition, we have determined the oxygen isotopic composition of an Apollo 15 KREEP (K - potassium, REE - Rare Earth Element, and P - phosphorus) basalt (sample 15386) and an Apollo 14 feldspathic mare basalt (sample 14053). Our data display a continuum in bulk-rock δ¹⁸O values, from relatively low values in the most Ti-rich samples to higher values in the Ti-poor samples, with the Apollo 11 sample suite partially bridging the gap. Calculation of bulk-rock δ¹⁸O values, using a combination of previously published oxygen isotope data on mineral separates from lunar basalts, and modal mineralogy (determined in this study), match with the measured bulk-rock δ¹⁸O values. This demonstrates that differences in mineral modal assemblage produce differences in mare basalt δ¹⁸O bulk-rock values. Differences between the low- and high-Ti mare basalts appear to be largely a reflection of mantle-source heterogeneities, and in particular, the highly variable distribution of ilmenite within the lunar mantle. Bulk δ¹⁸O variation in mare basalts is also controlled by fractional crystallisation of a few key mineral phases. Thus, ilmenite fractionation is important in the case of high-Ti Apollo 17 samples, whereas olivine plays a more dominant role for the low-Ti Apollo 12 samples.Consistent with the results of previous studies, our data reveal no detectable difference between the Δ¹⁷O of the Earth and Moon. The fact that oxygen three-isotope studies have been unable to detect a measurable difference at such high precisions reinforces doubts about the giant impact hypothesis as presently formulated.     

Enhancing the relevance of Shared Socioeconomic Pathways for climate change impacts,adaptation and vulnerability research

This paper discusses the role and relevance of the shared socioeconomic pathways (SSPs) and the new scenarios that combine SSPs with representative concentration pathways (RCPs) for climate change impacts, adaptation, and vulnerability (IAV) research. It first provides an overview of uses of social–environmental scenarios in IAV studies and identifies the main shortcomings of earlier such scenarios. Second, the paper elaborates on two aspects of the SSPs and new scenarios that would improve their usefulness for IAV studies compared to earlier scenario sets: (i) enhancing their applicability while retaining coherence across spatial scales, and (ii) adding indicators of importance for projecting vulnerability. The paper therefore presents an agenda for future research, recommending that SSPs incorporate not only the standard variables of population and gross domestic product, but also indicators such as income distribution, spatial population, human health and governance.     

Shell microstructure of late Cretaceous (Maastrichtian) oysters from Ariyalur,Tamil Nadu

The micro-morphological shell characters (both in optical microscope and SEM) have been used to discriminate in between oyster’s sub-families Pycnodonteinae Stenzel 1959, Exogyrinae Vyalov 1936, Ostreinae Refinesque 1815 and Lophinae Vyalov 1936. These sub-families are represented by six constituent genera Phygraea (Phygarea) vesicularis (Lamarck 1806), Hyotissa semiplana (Sowerby1813), Curvostrea rouvellei (Coquand 1862), Ceratostreon pliciferum (Dujardin 1837), Agerostrea ungulata (Schlotheim 1813) and Rastellum (Arctostrea) pectinatum (Lamarck 1810) in the late Cretaceous (Maastrichtian) sediments of the Ariyalur area of Tamil Nadu, south India. The optical microscopic observations and SEM studies of the shells of these six genera clearly indicate that all the four sub-families consist of distinctive set of shell-microstructures. Sub-family Pycnodonteinae is characterized by predominance of vesicular, exogyrinae by prismatic, Ostreinae by cross foliated and Lophinae by foliated shell microstructures. Besides their characteristic shell microstructures, some additional microstructures are also visible in the shells of some of the genera of these four sub-families.