Batch and Continuous Design of a Full‐Scale Treatment Facility for Removing Dissolved Natural Organic Matter

Batch and continuous flow adsorption experiments are carried out and the design of a full‐scale facility for removing dissolved natural organic matter (DNOM) from Catalan Lakewater is demonstrated. The adsorption efficiency is proportional to the temperature and the amount of adsorbent unlike pH increase. The highest DNOM removal rate is obtained at 35 °C, pH 4, and an adsorbent amount of 0.8 g L^?1. Optimum contact time for batch studies is 60 min at equilibrium. Correlation constants (r) of Langmuir and Freundlich isotherms are 0.8905 and 0.9739, respectively. Based on the Freundlich isotherm, the highest adsorption capacity (q_max) obtained is 2.44 and 6.01 mg DNOM/g granulated activated carbon (GAC) for raw and enriched water, respectively. Consequently, the effects of adsorbent amount, bed depth, empty bed contact time, and organic loading on removal performance are investigated in the rapid small‐scale column test (RSSCT) columns. The targeted effluent concentration of 1 mg DNOM/L can easily be achieved in the columns. At the design capacity of the facility, 15 adsorption columns with dimensions of 7 m height, 4.33 m diameter, and 22 days of operation cycle are required to remove DNOM from raw water.     

Ethnic groups’ response to the 26 December 2004 earthquake and tsunami in Aceh, Indonesia

The 26 December 2004 earthquake and tsunami unfairly hit the different ethnic groups of Aceh, Indonesia. About 170,000 Acehnese and Minangkabau people died in the Northern tip of Sumatra while only 44 Simeulue people passed away in the neighbouring Simeulue island located near the earthquake epicentre. Such a difference in the death toll does not lie in the nature of the hazard but in different human behaviours and ethnic contexts. The present study draws on a contextual framework of analysis where people’s behaviour in the face of natural hazards is deeply influenced by the cultural, social, economic and political context. Questionnaire-based surveys among affected communities, key informant interviews and literature reviews show that the people of Simeulue detected the tsunami very early and then escaped to the mountains. On the other hand, Acehnese and Minangkabau people, respectively in the cities of Banda Aceh and Meulaboh, did not anticipate the phenomenon and were thus caught by the waves. The different behaviours of the victims have been commanded by the existence or the absence of a disaster subculture among affected communities as well as by their capacity to protect themselves in facing the tsunami. People’s behaviours and the capacity to protect oneself can be further tracked down to a deep tangle of intricate factors which include the armed conflict that has been affecting the province since the 1970s, the historical and cultural heritage and the national political economy system. This paper finally argues that the uneven impact of the 26 December 2004 earthquake and tsunami in Aceh lies in the different daily life conditions of the ethnic groups struck by the disaster.     

Mouvements actuels des blocs tectoniques dans l’arc Bético-Rifain à partir des mesures GPS entre 1999 et 2005

GPS velocities and seismicity across the Betic–Rif Arc structural domains (Morocco and Iberia) provide a basis to evaluate present-day seismotectonic processes between different deformation belts. The results show asymmetric movements in the complex Alboran system accommodating the convergence between the African (Nubian) and Eurasian plates. While the Betic Mountains are attached to Iberia, moving toward the southeast with respect to Africa, the Rif is divided into three blocks with distinct displacements relative to Nubia: (1) the Tangier block moving southeastward, (2) the Central Rif block moving SSW, and (3) the Oriental Rif block undergoing clockwise rotation. GPS-derived motions decrease in rate from the Rif nappes complex to the foreland.     

Trace Element Levels in the Groundwater of Mediterranean Coastal Plains – The Case of Silifke,Turkey

The Silifke plain is located near the coast of the Mediterranean Sea in Turkey. The delta in the plain is a highly fertile land that supports the agriculture of more than twenty types of crop. Some trace element content of the groundwater samples taken from the existing wells in this area are analyzed using inductively coupled plasma optical emission spectrometry (ICP‐OES). The mean levels (ppm) of boron (B), barium (Ba), iron (Fe), manganese (Mn), lead (Pb), zinc (Zn), total chromium (TCr), cadmium (Cd), copper (Cu), aluminum (Al), and nickel (Ni) were obtained for the sampling points in the area for four seasons. Groundwater samples taken in the study area don't exhibit significantly elevated levels of these elements during a period of twelve months between December 2007 and November 2008. Furthermore, all of the elements exhibit values lower than 0.005 ppm, with the exception of B, Ba, and Fe. The results demonstrate that although these three elements produce the highest values, most are found to be appropriate for activities such as irrigation and human consumption in terms of trace elements.     

Impulsive and Varying Injection in Gamma-Ray Burst Afterglows

The standard model of gamma-ray burst afterglows is based on synchrotron radiation from a blast wave produced when the relativistic ejecta encounters the surrounding medium. We reanalyze the refreshed shock scenario, in which slower material catches up with the decelerating ejecta and reenergizes it. This energization can be done either continuously or in discrete episodes. We show that such a scenario has two important implications. First, there is an additional component coming from the reverse shock that goes into the energizing ejecta. This persists for as long as the reenergization itself, which could extend for up to days or longer. We find that during this time the overall spectral peak is found at the characteristic frequency of the reverse shock. Second, if the injection is continuous, the dynamics will be different from that in constant energy evolution and will cause a slower decline of the observed fluxes. A simple test of the continuously refreshed scenario is that it predicts a spectral maximum in the far-infrared or millimeter range after a few days.     

Petrological and geochemical evolution of the Kymi stock, a topaz granite cupola within the Wiborg rapakivi batholith, Finland

The 6×3 km Kymi monzogranite stock represents the apical part of an epizonal late-stage pluton that was emplaced within the 1.65 to 1.63 Ga Wiborg rapakivi batholith. The stock has a well-developed zonal structure, from the rim to the center: stockscheider pegmatite, equigranular topaz granite, porphyritic topaz granite. The contact between the two granites is usually gradational within a few centimeters, but local inclusions of the porphyritic granite in the equigranular granite indicate that the latter solidified later. Hydrothermal greisen and quartz veins, some of which contain genthelvite, beryl, wolframite, cassiterite, and sulfides, cut the granites of the stock and the surrounding country rocks. The equigranular granite contains 1 to 4 vol.% topaz, and its biotite is lithian siderophyllite; the porphyritic granite has 0 to 3 vol.% topaz, and the mica is siderophyllite. The equigranular granite is geochemically highly evolved with elevated Li, Rb, Ga, Ta, and F, and very low Ba, Sr, Ti, and Zr. The REE patterns show deep negative Eu anomalies and tetrad effects indicating extreme magmatic fractionation and aqueous fluid–rock interaction. The zonal structure of the stock is interpreted as a result of differentiation within the magma chamber. Internal convection in the crystallizing magma chamber and upward flow of residual melt as a boundary layer along sloping contacts resulted in accumulation of a layer of highly evolved, volatile-rich magma in the apical part of the chamber. Crystallization of this apical magma produced the stockscheider pegmatite and the equigranular granite; the underlying crystal mush solidified as the porphyritic granite. Much of the crystallization took place from volatile-saturated melt, and episodic voluminous degassing expelled fluids into opened fractures where they or their derivatives reacted with country rocks and caused alteration and mineralization.     

Secondary toppling failure analysis and optimal support design for ignimbrites in the Ihlara Valley (Cappadocia,Turkey) by finite element method (FEM)

Geotechnical and Geological Engineering - Kizilkaya ignimbrite, characterized by a blocky structure in the Ihlara Valley (Cappadocia, Turkey), poses many hazards to visitors and the human-made...     

Three-Dimensional Simulation of Water Circulation in the Java Sea: Influence of Wind Waves on Surface and Bottom Stresses

A one-year simulation of tide- andwind-driven circulation in the Java Sea, which is one ofthe Indonesian seas located in a tropical area, hasbeen carried out using a three-dimensionalhydrodynamic model incorporating the influence of thewind waves generated at the sea surface. This area isinfluenced by the monsoon climate (east- andwest-monsoon). Six hourly-wind fields at 10 m abovethe sea surface were used as a representative windfield. In other respects, the effect of waves on thethree-dimensional hydrodynamic model has beenrepresented by the surface and bottom stresses. Athird-generation wave model called WAM (WAMDI, 1988)was used to calculate the wave parameters and thewave dependence of the drag coefficient. Thetrajectory of water particles induced by thecalculated velocity fields in the Java Sea was then simulated.In dealing with hazardous phenomena, this modelwill be extended to predict suspended sediment fluxes,particularly those relating to catastrophic changes in seabottom topography and beach erosion. It is also animportant tool for the prediction of storm surge events.