Late Pleistocene-Holocene Paleoclimatic History of the Southern Kerala Basin, Southwest India

The South Kerala Sedimentary Basin (SKSB) constitutes one of the most significant landward extensions of the southwest offshore sedimentary basins of India, and is situated between 8^o45^' and 10^o15^' N latitudes. With a maximum width of about 20 km and incorporating a 700 m thick sedimentary succession ranging in age from Early Miocene to Holocene, this belt lies almost entirely under water or alluvium-covered coastal plains. In this study, we use two continuously cored bore holes at Eruva (7.25m deep) and Muthukulam (3m deep) separated by a distance of about 7km to investigate the depositional environment as well as paleo ecology of the depocentre and climatic aspects during the Late Pleistocene and Holocene. Results from C¹⁴ dating of shell fragments from Eruva (depth zone: 2.10–6.64m) yielded ages in the range of 36.2 to 42.5 kyBP corresponding to the late Pleistocene. Wood fragments in the Muthukulam core sample (depth zone: 1.27–3.00m) gave C¹⁴ ages in the range of 3.7 to 7.2 kyBP indicating a Holocene history. The lower half of the Eruva bore hole indicates a marginal marine environment with an abundant supply of terrestrial carbonaceous debris probably corresponding to a period of abnormally high rainfall recorded in many parts of the globe covered by the Asian summer monsoon. The sediments in the upper part of this bore hole indicate a continuation of this environment but with much less input of terrestrial organic carbon. The lower part of the bore hole from this locality, corresponding to the Holocene transgression, is similar to the lower part of Eruva bore hole in the case of TOC. Deposition took place in water bodies with considerable marine influence but receiving high amounts of terrestrial plant debris-mostly in the form of finely divided particles mixed with mud. This transgressive sequence was also deposited during a time when the Asian summer monsoon was abnormally high in intensity as indicated by many examples in India, Africa, Madagascar and elsewhere. It is significant that during the deposition of this part, the sea level was probably the same as present or higher suggesting possible lowering of the stream velocities and resultant deposition of only muddy sediments laden with terrestrial organic material along the coast. The upper part of the section shows a progressively reduced rainfall pattern culminating in a period of very low precipitation with the development of a paleosol, which is traceable all over the SKSB where Late Holocene sediments are available. This period also witnessed aeolian activity modifying the sand ridges in the ridge-runnel systems formed by the Holocene regression.     

Constraints on the timing and conditions of high‐grade metamorphism,charnockite formation and fluid–rock interaction in the Trivandrum Block,southern India

Incipient charnockites have been widely used as evidence for the infiltration of CO₂‐rich fluids driving dehydration of the lower crust. Rocks exposed at Kakkod quarry in the Trivandrum Block of southern India allow for a thorough investigation of the metamorphic evolution by preserving not only orthopyroxene‐bearing charnockite patches in a host garnet–biotite felsic gneiss, but also layers of garnet–sillimanite metapelite gneiss. Thermodynamic phase equilibria modelling of all three bulk compositions indicates consistent peak‐metamorphic conditions of 830–925 °C and 6–9 kbar with retrograde evolution involving suprasolidus decompression at high temperature. These models suggest that orthopyroxene was most likely stabilized close to the metamorphic peak as a result of small compositional heterogeneities in the host garnet–biotite gneiss. There is insufficient evidence to determine whether the heterogeneities were inherited from the protolith or introduced during syn‐metamorphic fluid flow. U–Pb geochronology of monazite and zircon from all three rock types constrains the peak of metamorphism and orthopyroxene growth to have occurred between the onset of high‐grade metamorphism at c. 590 Ma and the onset of melt crystallization at c. 540 Ma. The majority of metamorphic zircon growth occurred during protracted melt crystallization between c. 540 and 510 Ma. Melt crystallization was followed by the influx of aqueous, alkali‐rich fluids likely derived from melts crystallizing at depth. This late fluid flow led to retrogression of orthopyroxene, the observed outcrop pattern and to the textural and isotopic modification of monazite grains at c. 525–490 Ma.     

Isotope geochemistry and Re–Os geochronology of the Yanjiagou Mo deposit in the central North China Craton

The Yanjiagou deposit, located in the central North China Craton (NCC), is a newly found porphyry‐type Mo deposit. The Mo mineralization here is spatially associated with the Mapeng batholith. In this study, we identify four stages of ore formation in this deposit: pyrite phyllic stage (I), quartz–pyrite stage (II), quartz–pyrite–molybdenite stage (III), which is the main mineralization stage, and quartz–carbonate stage (IV). We present sulphur and lead isotope data on pyrite, and rhenium and osmium isotopes of molybdenite from the porphyry deposit and evaluate the timing and origin of ore formation. The δ³⁴S values of the pyrite range from ‐1.1‰ to −0.6‰, with an average of −0.875‰, suggesting origin from a mixture of magmatic/mantle sources and the basement rocks. The Pb isotope compositions of the pyrite show a range of 16.369 to 17.079 for ²⁰⁶Pb/²⁰⁴Pb, 15.201 to 15.355 for ²⁰⁷Pb/²⁰⁴Pb, and 36.696 to 37.380 for ²⁰⁸Pb/²⁰⁴Pb, indicating that the ore‐forming materials were derived from a mixture of lower crust (or basement rocks) and mantle. Rhenium contents in molybdenite samples from the main ore stage are between 74.73 to 254.43 ppm, with an average of 147.9 ppm, indicating a mixed crustal‐mantle source for the metal. Eight molybdenite separates yield model ages ranging from 124.17 to 130.80 Ma and a mean model age of 128.46 Ma. An isochron age of 126.7 ± 1.1 Ma (MSWD = 2.1, initial ¹⁸⁷Os = 0.0032 ± 0.0012 ppb) is computed, which reveals a close link between the Mo mineralization and the magmatism that generated the Mapeng batholith. The age is close to the zircon U–Pb age of ca. 130 Ma from the batholith reported in a recent study. The age is also consistent with the timing of mineralization in the Fuping ore cluster in the central NCC, as well as the peak time of lithosphere thinning and destruction of the NCC. We evaluate the spatio‐temporal distribution of the Mo deposits in the NCC and identify three important molybdenum provinces along the northern and southern margins of the craton formed during three distinct episodes: Middle to Late Triassic (240–220 Ma), Early Jurassic (190–175 Ma), and Late Jurassic to Early Cretaceous (150–125 Ma). The third period is considered to mark the most important metallogenic event, coinciding with the peak of lithosphere thinning and craton destruction in the NCC. Copyright © 2014 John Wiley & Sons, Ltd.     

Mineralogy and geochemistry of granitoids from Kinnaur region,Himachal Higher Himalaya,India: Implication on the nature of felsic magmatism in the collision tectonics

Felsic magmatism in the southern part of Himachal Higher Himalaya is constituted by Neoproterozoic granite gneiss (GGn), Early Palaeozoic granitoids (EPG) and Tertiary tourmaline-bearing leucogranite (TLg). Magnetic susceptibility values (<3 ×10^?3 SI), molar Al₂ O ₃/(CaO + Na₂ O + K ₂O) (≥1.1), mineral assemblage (bt–ms–pl–kf–qtz ± tur ± ap), and the presence of normative corundum relate these granitoids to peraluminous S-type, ilmenite series (reduced type) granites formed in a syncollisional tectonic setting. Plagioclase from GGn (An₁₀–An₃₁) and EPG (An₁₅–An₃₃) represents oligoclase to andesine and TLg (An₂–An₁₅) represents albite to oligoclase, whereas compositional ranges of K-feldspar are more-or-less similar (Or₈₈ to Or₉₅ in GGn, Or₈₆ to Or₉₇ in EPG and Or₈₇ to Or₉₄ in TLg). Biotites in GGn (Mg/Mg + Fe^t= 0.34–0.45), EPG (Mg/Mg + Fe^t= 0.27–0.47), and TLg (Mg/Mg + Fe^t= 0.25–0.30) are ferribiotites enriched in siderophyllite, which stabilised between FMQ and HM buffers and are characterised by dominant 3Fe\(\rightleftharpoons \)2Al, 3Mg\(\rightleftharpoons \)2Al substitutions typical of peraluminous (S-type), reducing felsic melts. Muscovite in GGn (Mg/Mg + Fe^t=0.58–0.66), EPG (Mg/Mg + Fe^t=0.31?0.59), and TLg (Mg/Mg + Fe^t=0.29–0.42) represent celadonite and paragonite solid solutions, and the tourmaline from EPG and TLg belongs to the schorl-elbaite series, which are characteristics of peraluminous, Li-poor, biotite-tourmaline granites. Geochemical features reveal that the GGn and EPG precursor melts were most likely derived from melting of biotite-rich metapelite and metagraywacke sources, whereas TLg melt appears to have formed from biotite-muscovite rich metapelite and metagraywacke sources. Major and trace elements modelling suggest that the GGn, EPG and TLg parental melts have experienced low degrees (～13, ～17 and ～13%, respectively) of kf–pl–bt fractionation, respectively, subsequent to partial melting. The GGn and EPG melts are the results of a pre-Himalayan, syn-collisional Pan-African felsic magmatic event, whereas the TLg is a magmatic product of Himalayan collision tectonics.     

Late Neoarchean crustal growth under paired continental arc-back arc system in the North China Craton

The late Archean (~3.0–2.5 Ga) was a key period of continental growth globally, which is widely considered to reflect the onset of vigorous plate tectonic activity, although related continental growth modes remain contentious. Here we investigate a suite of late Neoarchean metavolcanic rocks from the southwest Qixia area of the Jiaobei terrane in the North China Craton. The rocks in this suite include amphibolites, clinopyroxene amphibolites, and hornblende plagioclase gneisses. We present zircon U-Pb isotopic data which indicate that the protoliths of these rocks formed during ~2549–2511 Ma.The (clinopyroxene) amphibolites correspond to meta-basaltic rocks, with some containing high modal content of titanite. These rocks show moderate to high FeO_T (8.96–13.62 wt.%) and TiO₂ (0.59–1.59 wt.%), flat to less fractionated REE patterns, and mildly negative Th, Nb, and Ta anomalies, resembling those of Fe-tholeiites. In addition, they display positive zircon ?_Hf(t) values (+2.6 to +8.7), and are devoid of crustal contamination or fractional crystallization. Combined with the low Nb/Yb (mostly < 1.60) and (Hf/Sm)_N (mostly < 0.95), low to moderate Th/Yb (0.08–0.54), and low V/Sc (5.53–9.19) ratios, these basaltic rocks are interpreted to have been derived from a relatively reduced and depleted mantle source that was mildly metasomatized by hydrous fluids. The hornblende plagioclase gneisses are meta-andesitic rocks, and occur interlayered with the basaltic rocks. They are transitional between tholeiitic and calc-alkaline rock series, and show fractionated REE patterns with evidently negative Th, Nb, and Ta anomalies. The depleted zircon ?_Hf(t) values (+2.4 to +8.4) and quantitative chemical modeling suggest that the andesitic rocks were most likely generated by injection and mixing of juvenile felsic magmas with the tholeiitic basaltic magmas.In general, the chemical features and genesis of late Neoarchean meta-basaltic rocks in our study area resemble those of Mariana back-arc basin basalts. Combined with regional geological data, it is proposed that the Jiaobei terrane witnessed late Neoarchean crustal growth under a paired continental arc-back arc setting. On a regional context, we propose two distinct geodynamic mode of late Neoarchean continental growth across North China Craton (particularly the Eastern Block), i.e., (1) arc-continent accretion along northwestern part of the Eastern Block; and (2) paired continental arc-back arc system surrounding the ~3.8–2.7 Ga continental nuclei to the southeast.     

Analysis on the effect of salinity in underwater wireless optical communication

Abstract

This article deals with the effect of salinity variation on underwater wireless optical communication (UWOC). Effect of different concentration of salt on underwater optical communication has been carried out experimentally in terms of received power at different link lengths. Based on the analysis of experimental data, a mathematical model has been proposed to describe the saline water channel. A simulation study is performed for different data rates and link lengths. It is seen that with increased salinity the attenuation is higher and the UWOC system performance degrades with higher data rate and increased link length.     

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.     

Terrestrial heat flow and lithospheric thermal structure in the Chagan Depression of the Yingen-Ejinaqi Basin,north central China

The Chagan Depression in the Yingen-Ejinaqi Basin, located at the intersection of the Paleo-Asian Ocean and the Tethys Ocean domains is an important region to gain insights on terrestrial heat flow, lithospheric thermal structure and deep geodynamic processes. Here, we compute terrestrial heat flow values in the Chagan Depression using a large set of system steady-state temperature data from four representative wells and rock thermal conductivity. We also estimate the “thermal” lithospheric thickness, mantle heat flow, ratio of mantle heat flow to surface heat flow and Moho temperature to evaluate the regional tectonic framework and deep dynamics. The results show that the heat flow in the Chagan Depression ranges from 66.5 to 69.8 mW/m², with an average value of 68.3 ± 1.2 mW/m². The Chagan Depression is characterized by a thin “thermal” lithosphere, high mantle heat flow, and high Moho temperature, corresponding to the lithospheric thermal structure of “cold mantle and hot crust” type. We correlate the formation of the Yingen-Ejinaqi Basin to the Early Cretaceous and Cenozoic subduction of the western Pacific Plate and the Cenozoic multiple extrusions. Our results provide new insights into the thermal structure and dynamics of the lithospheric evolution in central China.