Artificial light at night: implications for early life stages development in four temperate freshwater fish species

Flora and fauna have both evolved under a natural cycle of light and dark. But especially in urban areas, the night is now increasingly disturbed by artificial light. Many traits and behaviours in fish are triggered by a circadian clock, for example hatching and swim bladder inflation, which predominantly take place at dusk or night. As lighting becomes brighter and extends farther into rural areas, the distinction between day and night becomes increasingly blurred. Therefore, the loss of diurnal trigger by artificial light at night was hypothesized having deleterious effects on these traits and impact fish reproduction. To assess these effects, eggs of four native freshwater fishes, Eurasian perch Perca fluviatilis, roach Rutilus rutilus, bleak Alburnus alburnus and chub Leuciscus cephalus, were incubated under two different light conditions: a photoperiod of 14 h light:10 h darkness (LD) and continuous illumination (LL). The time to hatch and swim bladder inflation was recorded. The species showed inconsistent reactions to the light treatments. In roach and bleak, the time to 50% hatch was longer in LL, whereas continuous lighting had an accelerating effect in chub. Incubation in LL elongated the hatching period in perch and roach and, in perch, the onset of darkness seemed to trigger hatching. The swim bladder inflation was significantly promoted by continuous light in chub and bleak but was not affected in roach. In conclusion, nocturnal artificial illumination could have an effect on hatching and initial swim bladder filling by masking the day–night-change and thereby diminish the trigger effect. However, the reactions were species specific and the increase in variation indicated a lack of diurnal triggering, whilst a general deleterious effect of artificial light at night has not been identified on early life stages.     

The Upper Middle Rhine Valley as a risk area

The Upper Middle Rhine Valley, granted the status of a World Heritage site, is well known for its unique inner narrow valley of Quaternary age with its historical legacy of numerous medieval castles and old towns. Less known is that this has always been a risk area of floods and gravitative mass movements. Up to the recent past, mainly ice floods caused enormous damage. The inhabitants of the valley were well aware that they lived in a risk area, but they had learned to handle the flood hazard. With the demise of ice floods over the last 40 years, due to climate change and because of the additional heating of the river water by power plants, the awareness of flood hazards has been much diminished, in contrast to that of potential damage by rockfalls and landslides which were also much feared in the past, though at the local level only. Still in the people’s memory is the Kaub catastrophe of March 10, 1876, when 28 persons were killed by a landslide. Nowadays, even minor rockfalls are a major threat, as they will affect the much-used traffic lines on both banks of the river, in particular the railroads. Therefore, since 2002, on behalf of German Rail (Deutsche Bahn, DB), all problematic slopes have been protected by costly steel-ring nets, although they are an aesthetic problem by UNESCO standards. The feeling of absolute safety created among the public is only subjective, though, as planners are well aware of. Moreover, the impact of modern climate change on slope stability is nearly unknown. Therefore, it is still necessary to develop a risk map for the narrow valley, with emphasis on gravitational hazards.     

A Long-Term Decrease of the Mid-Size Segmentation Lengths Observed in the He <Emphasis Type="SmallCaps">ii</Emphasis> (30.4 nm) Solar EUV Emission

Power spectra of segmentation-cell length (a dominant length scale of EUV emission in the transition region) from full-disk He?ii extreme ultraviolet (EUV) images observed by the Extreme ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SOHO) and the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) during periods of quiet-Sun conditions for a time interval from 1996 to 2015 were analyzed. The spatial power as a function of the spatial frequency from about 0.04 to 0.27 (EIT) or up to 0.48 (AIA) Mm^?1 depends on the distribution of the observed segmentation-cell dimensions – a structure of the solar EUV network. The temporal variations of the spatial power reported by Didkovsky and Gurman (Solar Phys. 289, 153, 2014) were suggested as decreases at the mid-spatial frequencies for the compared spectra when the power curves at the highest spatial frequencies of 0.5 pix^?1 were adjusted to match each other. This approach has been extended in this work to compare spectral ratios at high spatial frequencies expressed in the solar spatial frequency units of Mm^?1. A model of EIT and AIA spatial responses allowed us to directly compare spatial spectral ratios at high spatial frequencies for five years of joint operation of EIT and AIA, from 2010 to 2015. Based on this approach, we represent these ratio changes as a long-term network transformation that may be interpreted as a continuous dissipation of mid-size network structures to the smaller-size structures in the transition region. In contrast to expected cycling of the segmentation-cell dimension structures and associated spatial power in the spectra with the solar cycle, the spectra demonstrate a significant and steady change of the EUV network. The temporal trend across these structural spectra is not critically sensitive to any long-term instrumental changes, e.g. degradation of sensitivity, but to the change of the segmentation-cell dimensions of the EUV network structure.     

Climatic and geographic factors affect ecosystem multifunctionality through biodiversity in the Tibetan alpine grasslands

Ecosystem multifunctionality(EMF), the simultaneous provision of multiple ecosystem functions, is often affected by biodiversity and environmental factors. We know little about how the interactions between biodiversity and environmental factors affect EMF. In this case study, a structural equation model was used to clarify climatic and geographic pathways that affect EMF by varying biodiversity in the Tibetan alpine grasslands. In addition to services related to carbon, nitrogen, and water cycling, forage supply, which is related to plantproductivity and palatability, was included in the EMF index. The results showed that 72% of the variation in EMF could be explained by biodiversity and other environmental factors. The ratio of palatable richness to all species richness explained 8.3% of the EMF variation. We found that air temperature, elevation, and latitude all affected EMF, but in different ways. Air temperature and elevation impacted the aboveground parts of the ecosystem, which included plant height, aboveground biomass, richness of palatable species, and ratio of palatable richness to all species richness. Latitude affected EMF by varying both aboveground and belowground parts of the ecosystem, which included palatable speciesrichness and belowground biomass. Our results indicated that there are still uncertainties in the biodiversity–EMF relationships related to the variable components of EMF, and climatic and geographic factors. Clarification of pathways that affect EMF using structural equation modeling techniques could elucidate the mechanisms by which environmental changes affect EMF.     

On Simulation and Analysis of Variable‐Rate Pumping Tests

Analytical solutions for constant‐rate pumping tests are widely used to infer aquifer properties. In this note, we implement a methodology that approximates the time‐varying pumping record as a series of segments with linearly varying pumping rates. We validate our approach using an analytical solution for a sinusoidally varying pumping test. We also apply our methodology to analyze synthetic test data and compare the results with those from a commonly used method where rate variations are represented by a series of constant‐rate steps.     

Automated mapping of rock slope geometry,kinematics and stability with RSS-GIS

A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For such computations, different approaches for the analysis and regionalization of available structural directional information applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different test sites in Germany.     

Soil characterization based on land cover heterogeneity over a tropical landscape: an integrated approach using earth observation data-sets

Soil is a vital part of the natural environment and is always responding to changes in environmental factors, along with the influences of anthropogenic factors and land use changes. The long-term change in soil properties will result in change in soil health and fertility, and hence the soil productivity. Hence, the main aim of this paper focuses on the analysis of land use/land cover (LULC) change pattern in spatial and temporal perspective and to present its impact on soil properties in the Merawu catchment over the period of 18?years. Post classification change detection was performed to quantify the decadal changes in historical LULC over the periods of 1991, 2001 and 2009. The pixel to pixel comparison method was used to detect the LULC of the area. The key LULC types were selected for investigation of soil properties. Soil samples were analysed in situ to measure the physicochemical soil properties. The results of this study show remarkable changes in LULC in the period of 18?years. The effect of land cover change on soil properties, soil compaction and soil strength was found to be significant at a level of <0.05.     

Land quality index assessment for agricultural purpose using multi-criteria decision analysis (MCDA)

In this study, an attempt has been made to apply Remote Sensing (RS) and geographic information system (GIS) to determine land quality for agriculture purpose using analytic hierarchy process technique. In this study, various thematic layers were used like organic matter content, soil texture, soil depth, soil pH, soil P, soil K, geomorphology, run-off potential, slope and land use/land cover to assess the land quality index of the study area for the agriculture purpose which were generated in the RS and GIS environment. The study area can be divided into four zones, viz. high quality, moderately quality, marginally quality and low quality according to their suitability of land quality for agriculture purpose. It was found that about 39.09, 31.24, 20.41 and 9.26% of the study area falls under high quality zone, moderately quality, marginally quality and low quality zone, respectively, for agricultural purpose.     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.     

Using gravity and topography-implied anomalies to assess data requirements for precise geoid computation

Many regions around the world require improved gravimetric data bases to support very accurate geoid modeling for the modernization of height systems using GPS. We present a simple yet effective method to assess gravity data requirements, particularly the necessary resolution, for a desired precision in geoid computation. The approach is based on simulating high-resolution gravimetry using a topography-correlated model that is adjusted to be consistent with an existing network of gravity data. Analysis of these adjusted, simulated data through Stokes’s integral indicates where existing gravity data must be supplemented by new surveys in order to achieve an acceptable level of omission error in the geoid undulation. The simulated model can equally be used to analyze commission error, as well as model error and data inconsistencies to a limited extent. The proposed method is applied to South Korea and shows clearly where existing gravity data are too scarce for precise geoid computation.