Stress integration approach to evaluate damping ratio in torsional tests

The complexity of determining strain associated with shear modulus and damping ratio in torsional tests has been resolved by means of several approaches. The stress integration approach is adequate when generating the plots of equivalent radius ratio versus strain more effectively over any range of strains in resonant column and torsional shear (RC/TS) tests. The stress integration approach was applied for hyperbolic, modified hyperbolic, and Ramberg–Osgood models in evaluating damping ratio. This study showed that using a single value of equivalent radius ratio in evaluating damping ratio is not appropriate. The combined hysteretic‐nonviscous damping model was developed and employed to consider the increased damping behavior at small strains using the stress integration approach. The results suggest that adding viscous behavior has no significant effect strain calculations in RC/TS testing. Copyright © 2010 John Wiley & Sons, Ltd.     

Effects of surface forces and film elasticity on foam stability

The thin film pressure balance (TFPB) technique was used to determine the surface forces in foam films stabilized with flotation frothers such as n-pentanol, n-octanol, methyl isobutyl carbinol (MIBC), and polypropylene glycol (PPG). The results were compared with the foam stabilities measured experimentally and the film elasticities calculated using a model developed by Wang and Yoon [Wang, L., Yoon, R.-H., 2006a. Role of hydrophobic force in the thinning of foam films containing a nonionic surfactant. Colloids Surfaces A: Physicochem. Eng. Aspects, 282–283, 84–91.]. It was found that foam stabilities are controlled by both film elasticity and disjoining pressure, the relative contributions from each changing with frother type and concentration. At relatively low concentrations, frother dampens the hydrophobic force, an attractive component of the disjoining pressure, that destabilizes foams. At higher concentrations, elasticity plays a more important role in stabilizing foams.     

High-resolution numerical simulation of the Pacific Ocean

The present study developed Pacific Ocean models from the Research Institute for Applied Mechanics Ocean Model (RIAMOM) with very high horizontal (1/6° and 1/12°) and vertical (70 levels) resolutions. The hydrographic features of the simulations show good agreement with observed climatological features. Solution differences between the 1/6° and 1/12° models are small for general features of various physical components, but large for eddy fields and the strengths of western boundary currents and their extensions. However, the two high-resolution models show realistic climatological features of Pacific Ocean circulation patterns. Volume transports through major straits in the northwestern Pacific Ocean were also simulated and compared with previous observational results.     

Climate forcings and climate sensitivities diagnosed from atmospheric global circulation models

Understanding the historical and future response of the global climate system to anthropogenic emissions of radiatively active atmospheric constituents has become a timely and compelling concern. At present, however, there are uncertainties in: the total radiative forcing associated with changes in the chemical composition of the atmosphere; the effective forcing applied to the climate system resulting from a (temporary) reduction via ocean-heat uptake; and the strength of the climate feedbacks that subsequently modify this forcing. Here a set of analyses derived from atmospheric general circulation model simulations are used to estimate the effective and total radiative forcing of the observed climate system due to anthropogenic emissions over the last 50 years of the twentieth century. They are also used to estimate the sensitivity of the observed climate system to these emissions, as well as the expected change in global surface temperatures once the climate system returns to radiative equilibrium. Results indicate that estimates of the effective radiative forcing and total radiative forcing associated with historical anthropogenic emissions differ across models. In addition estimates of the historical sensitivity of the climate to these emissions differ across models. However, results suggest that the variations in climate sensitivity and total climate forcing are not independent, and that the two vary inversely with respect to one another. As such, expected equilibrium temperature changes, which are given by the product of the total radiative forcing and the climate sensitivity, are relatively constant between models, particularly in comparison to results in which the total radiative forcing is assumed constant. Implications of these results for projected future climate forcings and subsequent responses are also discussed.     

On Climate Variations and Changes Observed in South Korea

This study describes observations on possible climate changes occurring on the Korean Peninsula. We found that in large urban and industrial areas in Korea, there has been a significant increase in the annual mean temperatures according to data of the past 29 years. The increase in January temperatures was in the order of 0.8 ～ 2.4 ° C. However, in rural and marine stations, the increase in annual mean temperature was 0.6 ° C; the level of the global average. There was also an increase in precipitation: 259 mm over the recent 97 years. Observation has revealed that a month-long steady rainfall in late June and July with a quasi-stationary polar front has not occurred in recent years and has been replaced with scattered convective heavy-showers on a local scale in July and August. It is observed that the behaviour of this rainy front, `the Changma front' has brought changes to rainfall characteristics. Our results highlight the importance of the shortened rainy season. However, the amount of rainfall and the number of heavy rainfall days have increased.     

Stabilization of arsenic-contaminated mine tailings using natural and calcined oyster shells

Natural oyster shells (NOS) and calcined oyster shells (COS) were used to immobilize arsenic (As) from contaminated mine tailings. In addition, a blend of Portland cement (PC)/cement kiln dust (CKD) was used as a stabilizing agent. The Korean Standard Test (KST) method (1 N HCl extraction) was used to evaluate the effectiveness of the treatment. The experimental results showed that COS effectively immobilized As in treated mine tailings. Specifically, an As concentration less than 1 mg L⁻¹ was obtained following COS treatment at 25 and 30 wt%. However, all the samples subjected to NOS treatments failed the Korean warning standard of 1.2 mg L⁻¹ after 28 days of curing. All of the COS-PC treatments were successful meeting the Korean warning standard after 7 days of curing. However, the PC-only treatment failed to meet the Korean warning standard. Similarly, the CKD-only treatment was failed to meet the Korean warning standard after 7 days of curing. However, the COS-CKD treatment showed that when the COS content was greater than 20 wt%, less than 1 mg L⁻¹ of As leachability was obtained. Scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDX) showed needle-like and torpedo-like Ca–As phases in the COS-treated samples suggesting that As was strongly associated with Ca and O. X-ray absorption near edge structure (XANES) analyses confirmed that As(V) was prevalent in the tailings and that there were no changes in As speciation following NOS or COS treatment.     

Evaluation of multiphase flotation models in grid turbulence via Particle Image Velocimetry

Industrial processes involving multi-phase flows such as flotation require understanding of the relationships between bubbles, solid particles and the flow. Modern experimental tools are employed in this effort to measure with great accuracy the basic features of the motion of all three phases in turbulent flow. We employed a unique Digital Particle Image Velocimeter (DPIV) that can record with great accuracy and kHz temporal resolution, velocity vectors of all three phases, namely the fluid, the solid particles and the air bubbles. The interaction of these three phases was studied in homogeneous isotropic turbulence generated by cylindrical grids. Particles and bubbles were released into the turbulence and the motions of the three phases were monitored. The experimental results obtained in the present work were compared with the predictions of the models published in the literature.     

New insights into the crustal structure of the North German Basin from reprocessing of seismic reflection data using the Common Reflection Surface stack

The influence of deep crustal processes on basin formation and evolution and its relation to current morphology is not well understood yet. A key feature to unravel these issues is a detailed seismic image of the crust. A part of the data recorded by the hydrocarbon industry in the late 1970s and 1980s in the North German Basin were released to the public recently. The seismic reflection data were recorded down to 15 s two-way travel time. The mean Common Midpoint fold of about 20 is relatively low compared to contemporary seismic acquisitions. The processing of the 1980s focussed on the sedimentary structures to explore the hydrocarbon potential of this area. We applied the Common Reflection Surface stack technique to the data sets, which is well suited for low-fold data. The reprocessing was focussed on the imaging of the subsedimentary crustal range. The reprocessed images show enhanced reflections, especially in the mid and lower crustal part. Also, the image of the salt structures in the graben area was improved. Furthermore, the reprocessed images indicate an almost flat Moho topography in the area of the Glückstadt Graben and an additional lower crustal structure, which can be correlated with a high-density body found in recent gravity modeling studies.     

Development and application of a novel miniature in situ microprofiler (NAFRI BelpI)

We have developed a novel miniature in situ microprofiler (NAFRI BelpI) for coastal and deep-sea studies. The BelpI can carry up to three oxygen microsensors, and it allows for simultaneous replicate measurements in a relatively small area. All functions can be controlled and programmed via a small magnetic bar and three reed switches; this feature facilitates the initial setup both onboard and underwater. The large LCD window shows basic information such as the movement intervals of the linear stage, number of replicate measurements, waiting time between measurements, and the pA from the microsensors. From high-resolution vertical profiles of oxygen in coastal sediment measured using the microsensors, the diffusivity boundary layer thicknesses was determined to be in the range 0.30–0.35 mm. In addition, the time-series measurement of oxygen profiles in permeable sandy sediment showed advective transport of oxygen into pore water by tidal agitation. Two examples of in situ measurement using a BelpI suggest that it can be widely applied to the study of the sediment-water interface.