Modern Dinoflagellate Cysts Distribution off the Eastern Part of Geoje Island,Korea

Distributional characteristics of dinoflagellate cysts in surface sediments were investigated in relation to environmental factors in the eastern part of Geoje Island, Korea. Samples were collected from 10 stations in February of 2004 and water temperature and salinity were measured in February, May, September and November of 2004. Total 30 taxa of dinoflagellate cysts were identified representing 19 genera, 28 species and 2 unidentified species. Among these dinoflagellate cysts,Brigantedinium spp. of which relative proportion in the total dinoflagellate cysts was 23.5%, was the most abundant at all stations except St. 1, and was followed bySpiniferites bulloideus (8.6%),Lingulodinium machaerophorum (8.2%) andDiplopsalis lenticula (6.7%). In addition, ellipsoidal cysts of the genusAlexandrium (Alexandrium catenella - tamarense type) andGymnodinium catenatum, known to be causative organisms for PSP, occurred with high concentrations.Scrippsiella trochoidea was also found; however, its cyst concentration was low. Generally, species composition in the study area was similar to these reported from Jinhae Bay and Busan Harbor and several dinoflagellate cysts reflected the eutrophic condition. Cyst distribution in the eastern part of Geoje Island seems to be influenced by the Tsushima Warm Current flowing from the southwest. The mean water temperature was 12.0°C in February, 14.7°C in May, 20.9°C in September and 17.2°C in November, which was most favorable forAlexandrium spp. growth. The abundances of dinoflagellate cysts ranged from 528 to 2,834 cysts/g dry sediment. Higher concentrations were recognized in sediments of west area of the Jisimdo than at other stations. The cyst composition of this area was closely related to these of Jinhae Bay and Busan Harbor from which currents flow into this area. Higher cyst concentration in the west area of Jisimdo might be due to formation of the gyre.     

Flow-based seismic risk assessment of a water transmission network employing probabilistic seismic hazard analysis

Natural Hazards - In this study, a seismic risk assessment model was proposed to evaluate the seismic reliability of a water transmission network. The proposed risk assessment model involves...     

Molecular characterization and morphology of the photosynthetic dinoflagellate Bysmatrum caponii from two solar saltons in western Korea

Species belonging to the genus Bysmatrum are peridinoid, thecate, photosynthetic dinoflagellates. The plate formula of Bysmatrum spp., arranged in a Kofoidian series, is almost identical to that of Scrippsiella spp. Bysmatrum spp., which were originally classified as Scrippsiella spp., but were transferred to the genus Bysmatrum spp. because of separation of the intercalary plates 2a and 3a by plate 3??. Whether this transfer from Scrippsiella spp. to Bysmatrum spp. is reasonable should be genetically confirmed. Dinoflagellates were isolated from 2 solar saltons located in western Korea in 2009?C2010 and 3 clonal cultures from Sooseong solar saltons and 2 clonal cultures from Garolim solar saltons were successfully established. All of these dinoflagellates were identified as Bysmatrum caponii based on morphology analysis by light and electron microscopy. The plates of all Korean strains of B. caponii were arranged in a Kofoidian series of Po, X, 4??, 3a, 7??, 6c, 4s, 5?, 0 (p), and 24??. When properly aligned, the ribosomal DNA (rDNA) sequences of the 3 Sooseong strains of B. caponii were identical, as were those of the 2 Garolim strains. Furthermore, the sequences of the 3 Sooseong strains were 0.01% different from those of the Garolim strains. However, the sequences of SSU rDNA of these Korean B. caponii strains were 9% different from that of Bysmatrum subsalsum and > 10% from that of any other dinoflagellate thus far reported. In the phylogenetic trees generated using SSU and LSU rDNA sequences, these Korean B. caponii strains formed a clade with B. subsalsum which was clearly divergent from the Scrippsiella clade. However, this Bysmatrum clade was phylogenetically close to the Protoperidinium and/or Peridinium clades. The results of the present study suggest that Bysmatrum spp. are markedly different genetically from Scrippsiella spp..     

NAPL source zone depletion model and its application to railroad-tank-car spills

We developed a new semi-analytical source zone depletion model (SZDM) for multicomponent light nonaqueous phase liquids (LNAPLs) and incorporated this into an existing screening model for estimating cleanup times for chemical spills from railroad tank cars that previously considered only single-component LNAPLs. Results from the SZDM compare favorably to those from a three-dimensional numerical model, and from another semi-analytical model that does not consider source zone depletion. The model was used to evaluate groundwater contamination and cleanup times for four complex mixtures of concern in the railroad industry. Among the petroleum hydrocarbon mixtures considered, the cleanup time of diesel fuel was much longer than E95, gasoline, and crude oil. This is mainly due to the high fraction of low solubility components in diesel fuel. The results demonstrate that the updated screening model with the newly developed SZDM is computationally efficient, and provides valuable comparisons of cleanup times that can be used in assessing the health and financial risk associated with chemical mixture spills from railroad-tank-car accidents.     

Field velocity resistivity probe for estimating stiffness and void ratio

Elastic and electromagnetic waves are commonly used to investigate various soil characteristics. The goal of this study is to estimate the elastic moduli and the void ratio based on both the compressional and shear wave velocities, and the electrical resistivity measured by field velocity resistivity probe (FVRP). The compressional and shear waves are measured by piezoelectric disk elements and bender elements installed at the end of the FVRP frame tip. The electrical resistivity is determined by the electrical resistivity probe installed at the tip of the FVRP frame. The FVRP tests are carried out in a clay–sand mixture prepared in a calibration chamber and in silty sand to silty clay soils in the field. The elastic waves and electrical resistivity are measured at every 1 cm. The field tests are carried out at a depth of 6–20 m, at 10 cm intervals, at the Southern coastal area of the Korean peninsula. The measured data are converted into the constraint and shear moduli based on the elastic waves. Void ratios are evaluated based on the elastic wave velocities and the electrical resistivity, and these void ratios match the volumetric void ratio well. This study suggests that the FVRP may effectively determine the elastic moduli and void ratio.     

Assimilation of TOPEX/POSEIDON Altimeter Data with a Reduced Gravity Model of the Japan Sea

Sea level data measured by TOPEX/POSEIDON over the Japan Sea from 1993 to 1994 is analyzed by assimilation using an approximate Kalman filter with a 1.5 layer (reduced-gravity) shallow water model. The study aims to extract signals associated with the first baroclinic mode and to determine the extent of its significance. The assimilation dramatically improves the model south of the Polar Front where as much as 20 cm² of the observed sea level variance can be accounted for. In comparison, little variability in the northern cold water region is found consistent with the model dynamics, possibly due to significant differences in stratification.     

The Current Structure of the Tsushima Warm Current along the Japanese Coast

The branching of the Tsushima Warm Current (TWC) along the Japanese coast is studied based upon intensive ADCP and CTD measurements conducted off the Wakasa Bay in every early summer of 1995–1998, the analysis of the temperature distribution at 100 m depth and the tracks of the surface drifters (Ishii and Michida, 1996; Lee et al., 1997). The first branch of TWC (FBTWC) exists throughout the year. It starts from the eastern channel of the Tsushima Straits, flows along the isobath shallower than 200 m along the Japanese coast and flows out through the Tsugaru Strait. The current flowing through the western channel of the Tsushima Straits feeds the second branch of TWC (SBTWC) which develops from spring to fall. The development of SBTWC propagates from the Tsushima Straits to Noto Peninsula at a speed of about 7 cm sec⁻¹ following the continental shelf break with a strong baroclinicity. However, SBTWC cannot be always found around the shelf break because its path is influenced by the development of eddies. It is concluded that SBTWC is a topographically steered current; a current steered by the continental shelf break. Salient features at intermediate depth are the southwestward subsurface counter current (SWSCC) between 150 m and 300 m depths over the shelf region in 1995–1998 with the velocity exceeding about 5 cm sec⁻¹, although discrepancies of the velocity and its location are observed between the ADCP data and the geostrophic currents. This revised version was published online in August 2006 with corrections to the Cover Date.     

Seismic stratigraphy of the western South Korea Plateau,East Sea: implications for tectonic history and sequence development during back-arc evolution

The western South Korea Plateau in the East Sea (Sea of Japan) is occupied by rifted continental fragments formed in association with the early phase of back-arc opening. The present study focuses on the seismic stratigraphy of the sedimentary succession and the underlying acoustic basement in this region, based on closely spaced multichannel seismic reflection profiles. The sedimentary succession occurs mainly within a series of subparallel basement troughs (grabens or half grabens) bounded by faulted continental blocks (horsts) or volcanic ridges, and commonly floored by extrusive volcanic rocks showing hyperbolic reflectors. These features are strongly suggestive of continental rifting accompanied by normal faulting, volcanic activity and high rates of basin subsidence. The sedimentary succession can be subdivided into four seismic units. Unit 1 is characterized by short and irregular high-amplitude reflectors and interpreted as a syn-rift deposit consisting of a non-marine volcanics/sediment complex in topographic lows. Units 2 and 3 formed in an open marine environment during the Middle Miocene to Early Pliocene, characterized by an onlap-fill and later draping marine sedimentary succession dominantly composed of hemipelagic sediments and turbidites with frequent intercalation of mass-flow deposits. Along the western margin of the plateau, these units were deformed under a compressional regime in the Early Pliocene, associated with the back-arc closing phase. Unit 4 (deposited since the Early Pliocene) comprises hemipelagic sediments and turbidites with evidence of sporadic slides/slumps.     

Numerical simulations using momentum source wave-maker applied to RANS equation model

For Navier-Stokes equation model using the VOF scheme, Lin and Liu (Lin, P. and Liu, P.L.-F. (1999). Internal wave-maker for Navier-Stokes equations models. J. Waterw. Port Coast. Ocean Eng., 125 (4), 207–215.) developed an internal wave-maker method for which a mass source function of the continuity equation was used to generate target wave trains. Using this internal wave-maker method, various numerical experiments have been conducted without any problems due to waves reflected by a wave-maker. In this study, an internal wave-maker method using a momentum source function was proposed. Various numerical simulations in two and three dimensions were performed using the momentum source wave-maker applied to the RANS equation model in a CFD code, FLUENT. To verify their applicability in 2 dimensions, the computational results obtained using the momentum source wave-maker in a channel of constant depth were compared with the results obtained by using the mass source wave-maker and with the analytical solutions. And the results of the present numerical simulations of hydraulic experiments, which represent nonlinear waves on a submerged shoal and breaking waves on a plane beach, were compared with measurements. The comparisons showed good agreements between them. To see their applicability into 3-dimensional cases, the present results in a basin of constant depth were compared with the analytical solutions, and they agreed well with each other. In addition, vertical variation of longshore current was presented by using the 3-dimensional simulation results.