The generation of coastal undercurrents

Equilibrium conditions in anf-plane ocean evolve as follows after the sudden onset of winds parallel to a coast. At first the flow is two-dimensional-spatial variations are confined to a plane perpendicular to the coast-and the salient features in the forcing region are acceleration of a coastal jet in the surface layers in the wind direction, and offshore Ekman drift that causes coastal upwelling. Kelvin waves excited at the edge of the forced region establish equilibrium conditions by creating an alongshore pressure gradient that balances the wind so that the acceleration stops. The vertical structure corresponding to each vertical mode differs from that of the wind-driven coastal jet so that the arrival of the barotropic Kelvin wave starts to accelerate a coastal undercurrent in a direction opposite to that of the wind. Subsequent baroclinic Kelvin waves modify the vertical structure of the coastal current so that the undercurrent in the subsurface layer is accelerated. In an inviscid model there is a singularity in the surface layers at the coast ast→∞ because the Kelvin modes with small offshore and vertical scales travel slowly and take a very long time to make their contribution to the establishment of equilibrium conditions. A modest amount of friction eliminates this problem. Nonlinearities are important in the heat equation and affect sea surface temperatures significantly but their effect on the momentum balance is secondary.     

The Current Structure of the Tsushima Warm Current along the Japanese Coast

The branching of the Tsushima Warm Current (TWC) along the Japanese coast is studied based upon intensive ADCP and CTD measurements conducted off the Wakasa Bay in every early summer of 1995–1998, the analysis of the temperature distribution at 100 m depth and the tracks of the surface drifters (Ishii and Michida, 1996; Lee et al., 1997). The first branch of TWC (FBTWC) exists throughout the year. It starts from the eastern channel of the Tsushima Straits, flows along the isobath shallower than 200 m along the Japanese coast and flows out through the Tsugaru Strait. The current flowing through the western channel of the Tsushima Straits feeds the second branch of TWC (SBTWC) which develops from spring to fall. The development of SBTWC propagates from the Tsushima Straits to Noto Peninsula at a speed of about 7 cm sec⁻¹ following the continental shelf break with a strong baroclinicity. However, SBTWC cannot be always found around the shelf break because its path is influenced by the development of eddies. It is concluded that SBTWC is a topographically steered current; a current steered by the continental shelf break. Salient features at intermediate depth are the southwestward subsurface counter current (SWSCC) between 150 m and 300 m depths over the shelf region in 1995–1998 with the velocity exceeding about 5 cm sec⁻¹, although discrepancies of the velocity and its location are observed between the ADCP data and the geostrophic currents. This revised version was published online in August 2006 with corrections to the Cover Date.     

Depositional environment of near-surface sediments,King George Basin,Bransfield Strait,Antarctica

Four sediment cores were collected to determine the depositional environments of the King George Basin northeast of Bransfield Strait, Antarctica. The cored section revealed three distinct lithofacies: laminated siliceous ooze derived from an increased paleoproductivity near the receding sea-ice edges, massive muds that resulted from hemipelagic sedimentation in open water, and graded sediments that originated from nearby local seamounts by turbidity currents. Clay mineral data of the cores indicate a decreasing importance of volcanic activity through time. Active volcanism and hydrothermal activity appear to be responsible for the enrichment of smectite near the Penguin and Bridgeman Islands.     

Spatial modeling of the highest daily maximum temperature in Korea via max-stable processes

This paper examines the annual highest daily maximum temperature （DMT） in Korea by using data from 56 weather stations and employing spatial extreme modeling. Our approach is based on max-stable processes （MSP） with Schlather＇s characterization. We divide the country into four regions for a better model fit and identify the best model for each region. We show that regional MSP modeling is more suitable than MSP modeling for the entire region and the pointwise generalized extreme value distribution approach. The advantage of spatial extreme modeling is that more precise and robust return levels and some indices of the highest temperatures can be obtained for observation stations and for locations with no observed data, and so help to determine the effects and assessment of vulnerability as well as to downscale extreme events.     

THE N／P RATIO IN THE NORTHERN SOUTH YELLOW SEA IN AUTUMN

Study of horizontal and vertical distributions of the N/P(nitrogen versus phosphate)atom ratio in the northem South Yellow Sea showed that the ratio varied greatly in upper waters of the in-vestigated area and was always much greater than the theoretical Redfield ratio of 16:1 found below the thermocline zone.It was in general higher near the coast and lower in the central part.With increasing depth,the ratio became smaller and smaller.This distribution pattem is attributed to :1)the anthropo-genic influence of the surface N and P which makes the N/P ratio differ from the normal value;2)the easy adsorption of P on particles hinders P trasport to the central part;3)below the thermocline zone,the N and P mainly come from the remineralization of the sedimented phytoplankton residues which have almost the theoretical Redfield value and;4)the existence of the Yellow Sea Bottom Cold Water which inhibits the vertical exchange of the water.     

Numerical simulations using momentum source wave-maker applied to RANS equation model

For Navier-Stokes equation model using the VOF scheme, Lin and Liu (Lin, P. and Liu, P.L.-F. (1999). Internal wave-maker for Navier-Stokes equations models. J. Waterw. Port Coast. Ocean Eng., 125 (4), 207–215.) developed an internal wave-maker method for which a mass source function of the continuity equation was used to generate target wave trains. Using this internal wave-maker method, various numerical experiments have been conducted without any problems due to waves reflected by a wave-maker. In this study, an internal wave-maker method using a momentum source function was proposed. Various numerical simulations in two and three dimensions were performed using the momentum source wave-maker applied to the RANS equation model in a CFD code, FLUENT. To verify their applicability in 2 dimensions, the computational results obtained using the momentum source wave-maker in a channel of constant depth were compared with the results obtained by using the mass source wave-maker and with the analytical solutions. And the results of the present numerical simulations of hydraulic experiments, which represent nonlinear waves on a submerged shoal and breaking waves on a plane beach, were compared with measurements. The comparisons showed good agreements between them. To see their applicability into 3-dimensional cases, the present results in a basin of constant depth were compared with the analytical solutions, and they agreed well with each other. In addition, vertical variation of longshore current was presented by using the 3-dimensional simulation results.     

Evolution of waves and currents over a submerged laboratory shoal

The vertically-integrated effect of interaction between waves and wave-induced currents on wave transformation over a submerged elliptic shoal was investigated based on numerical simulations of the Vincent and Briggs experiment [Vincent, C.L., Briggs, M.J., 1989. Refraction- diffraction of irregular waves over a mound. Journal of Waterway, Port, Coastal and Ocean Engineering, 115(2), pp. 269–284.]. The numerical simulations were performed using two numerical wave-current model systems: one, a combination of the wave model SWAN and the current model SHORECIRC, and the other, a combination of the wave model REF/DIF and the same current model. A time-dependent, phase-resolving wave and current model, FUNWAVE, was also utilized to simulate the experiment. In the simulations, the developed wave-induced currents defocused waves behind the shoal and brought on a wave shadow zone that showed relatively low wave height distributions. For the breaking case of monochromatic waves, the wave heights computed using FUNWAVE showed good agreement with the measurements and the resulting wave-induced currents showed a jet-like velocity distribution in transverse direction. And the computed results of the two model combinations agreed better with the measurements than the computed results obtained by neglecting wave-current interaction. However, it was found that for the case in which transverse interference pattern caused by refracted waves was strong, REF/DIF-SHORECIRC did not correctly evaluate radiation stresses, the gradients of which generate wave-induced currents. SWAN-SHORECIRC, which cannot deal with the interference patterns, predicted a jet-like wave-induced current. For breaking random wave cases, the computed results of the two model combinations and FUNWAVE agreed well with the measurements. The agreements indicate that it is necessary to take into account the effect of wave-induced current on wave refraction when wave breaking occurs over a submerged shoal.     

Effects of humic acid on heavy metal uptake by herbaceous plants in soils simultaneously contaminated by petroleum hydrocarbons

The effects of humic acid (HA) on heavy metal uptake by herbaceous plants in soil simultaneously contaminated with heavy metals and petroleum hydrocarbons were investigated. The results showed that HA reduced readily soluble and exchangeable forms of heavy metals in the contaminated soil but increased their plant-available forms. Potential bioavailability and leachability factors became larger than 1 after adding HA to the soil, except for those of Ni, suggesting that more heavy metals could be potentially phytoavailable for plant uptake. Furthermore, HA increased the accumulation of Pb, Cu, Cd, and Ni in the shoots and roots of selected plants. The greatest increase in the accumulation of heavy metals was 264.7 % in the shoot of Festuca arundinacea, with the bioconcentration factor (BCF) increasing from 0.30 to 1.10. Humic acid also increased the BCFs of the roots of Brassica campestris for Ni and Pb. These results suggest that HA amendment could enhance plant uptake of heavy metals, while concurrently reducing heavy metal leachability and preventing subsurface contamination, even in soils simultaneously contaminated with petroleum hydrocarbons.     

Two different geomentalities,two different gardens: the French and the Japanese cases

The French Renaissance gardens and Japanese hill gardens have constrasting garden landscapes. Japanese gardens are naturalistic and intend to give illusions that they are the beautiful spots of unspoilt nature. In contrast, the appearances of French gardens are not an imitation of nature but boldly reorganised landscapes in geometric forms. These two contrasting types of garden landscapes represent two different sets of geomentalities (frames of mind regarding geographical environment).An earlier draft of this paper was presented at the Ninth New Zealand International Conference on Asian Studies, Hamilton, 23–26 August 1991. Its abridged version is published in D. Bing and K. Henshell (ed.)Japanese Perceptions of Nature and the Natural Order (Hamilton, NZ 1992), pp. 1–11. The present paper was developed from the first half of the conference paper, and was completed during my three month's tenure in 1993 as a Japan Foundation fellow. I am grateful to the Japan Foundation for their generous support of my research on the Japanese geomentality.