ARD generation and corrosion potential of exposed roadside rockmass at Boeun and Mujoo,South Korea

Acid rock drainage (ARD) is a longstanding problem often associated with the resulting corrosion due to the acidity generated from sulfidic oxidation. To evaluate characteristics of ARD and corrosion, samples from the road side rock mass of Boeun and Mujoo were analysed using X-ray diffraction, acid/base accounting and Leaching tests. The results indicated that many samples had a pyritic origin and can be regarded as acid-generating rocks. The Leaching test showed that the average pH of the leachates of samples from both Boeun and Mujoo were moderately acidic, ranging from 3 to 4. Interestingly, as acidity increases from pH 4, the SO₄₋, Fe, Al and Mg concentrations increase abnormally. Samples from roadside slope of Mujoo showed high corrosive potential. Maximum sulfide oxidation rate of a sample taken from Mujoo was as high as 5,166 mg/kg/week.     

煤储层吸附特征研究现状及展望

从吸附机理、吸附数学模型、吸附影响因素以及多元气体吸附等几个方面，综述了国内外煤储层吸附气体研究的现状，分析了当前我国煤储层吸附研究中存在的问题和难点，对下一步煤储层吸附研究的发展趋势和需要解决的问题作了进一步的探讨。     

Geochronologic evidence for Early Cretaceous volcanic activity on Barton Peninsula, King George Island, Antarctica

Ages of six volcanic and plutonic rocks on Barton Peninsula, King George Island, were determined using ⁴⁰Ar/³⁹Ar and K-Ar isotopic systems. The ⁴⁰Ar/³⁹Ar and K-Ar ages of basaltic andesite and diorite range from 48 My to 74 My and systematically decrease toward the upper stratigraphic section. Two specimens of basaltic andesite which occur in the lowermost sequence of the peninsula, however, apparently define two distinct plateau ages of 52-53 My and 119-120 My. The latter is interpreted to represent the primary cooling age of basaltic andesite, whereas the former is interpreted as the thermally-reset age caused by the intrusion of Tertiary granitic pluton. The isochron ages calculated from the isotope correlation diagram corroborate our interpretation based on the apparent plateau ages. It is therefore likely that volcanism was active during the Early Cretaceous on Barton Peninsula. When the K-Ar ages of previous studies are taken into account with our result, the ages of basaltic andesite in the northern part of the Barton Peninsula are significantly older than those in the southern part. Across the north-west-south-east trending Barton fault bounding the two parts, there are significant differences in geochronologic and geologic aspects.     

关于天津建筑间距空间分析的探讨

首先总结了天津市新版规划放线技术报告涉及的技术规范,提出了"建筑间距空间进行分析图"标准化制作流程;然后以图例形式对居住建筑计算间距的规则进行详解;最后对其中部分重难点问题进行汇总分析.     

地电化学提取法在武山铜矿深部找矿的试验研究

选用具有极强吸附能力,并做纯化处理的高泡聚氨脂泡塑和碳棒组装成的提取器,用1 L纯水作为提取剂,采用低电压(9 V)偶极地电提取方法在江西武山铜矿区开展了地电化学技术寻找隐伏矿体可行性研究。试验结果显示,在隐伏铜矿体上方出现明显的Cu、Pb、Zn电化学异常,异常出现的位置与矿区已知矿化体出现的地质部位比较吻合,表明该方法针对本地区深部矿体指示作用较强。     

Assessment of pollution and ecological risk of heavy metals in the surface sediments of Ulsan Bay,Korea

Heavy metal concentrations in the surface sediments of specially managed Ulsan Bay were investigated to determine metal distribution, pollution status and its ecological risk using pollution indices (enrichment factor and geo-accumulation index), potential ecological risk index and sediment quality guidelines (SQGs). The order of mean concentration (mg/kg) of metals was Zn (361.9) > Cu (95.6) > Pb (90.7) > Cr (64.7) > Ni (32.2) > Co (16.6) > As (15.8) > Cd (0.40) > Hg (0.16) in sediments of Ulsan Bay. Spatial distribution of metals in sediments showed a significantly higher concentration near industrial complexes, indicating that metal pollution is caused by anthropogenic sources. The results of enrichment factor (EF) and geo-accumulation index (I_geo) showed that sediments were significantly accumulated with Cu, Zn, As, Cd, Pb and Hg, indicating moderate to very severe enrichment (pollution) by these metals. Based on the potential ecological risk index, Hg and Cd posed a very high and a considerable potential ecological risk. Cu and As posed a moderate potential ecological risk, while, other metals (Cr, Co, Ni, Zn and Pb) rarely posed any potential ecological risk to the coastal environments. The sediments in Ulsan Bay showed a very high level of ecological risk, dominated by Hg and Cd. Metal concentrations in sediments were 80% for Cu, 96.7% for Zn, 50% for As, 70% for Pb and 50% for Hg above the threshold effects level (TEL), respectively.     

The impact of changing environments on the runoff regimes of the arid Heihe River basin, China

This study analyzed the inter- and inner-annual variations of discharge regimes in the upper and mid reaches of the Heihe River basin. These variations then correlated with temperature and precipitation variations in the area. The differences between the runoff regimes at the upper and mid reaches were compared, and the human impacts on discharge variations in the Heihe River were discussed. The results indicate that in the upper reaches, the long-term trends and periods of discharge and precipitation correlate well. In the mid reaches, the discharge and temperature trends correlate well, and the short discharge and precipitation periods correlate well. Precipitation increases would generate more runoff in both the upper and mid reaches, but the effects of temperature increases on discharge are different in the upper and mid reaches. Temperature increases would enhance the glacial ablation processes and increase runoff in the upper reaches. However, temperature increases would increase the evaporation and decrease runoff in the mid reaches. After the 1980s, higher temperature enhanced snow and glacial melt, and increasing precipitation increased the discharge in the upper reaches. Although increasing precipitation increased some discharge, great human activities caused a notable discharge decrease in the 1990s in the mid reaches, especially during the spring to autumn when large amounts of water resources were used for irrigation. In summary, both precipitation and temperature impact the availability of water resources in the study area, and active and effective adaptation strategies should be developed to improve the efficiency of water resource exploration and to prevent the desertification processes in the arid Heihe River basin.     

Effects of the Changjiang river discharge on sea surface warming in the Yellow and East China Seas in summer

This study explores the effects of the Changjiang (also called the Yangtze River) river discharge (CRD) on the density stratifications and associated sea surface temperature (SST) changes using a global ocean general circulation model with regional focus on the Yellow and East China Seas (YECS). It is found that CRD increases the SST in summer through a barrier layer (BL) formation that tends to enhance stratification at the mixed layer base, and thus reduces both vertical mixing and entrainment. This process is effective, particularly in August, after the CRD reaches its maximum in July. The SST difference between the composites of flood and drought years confirms that the surface warming is related to surface freshening by the CRD. This result suggests that the BL induced by the CRD is an important contributor to the surface heat budget in the YECS.     

Polychlorinated biphenyls (PCBs) in a benthic ecosystem in Gwangyang Bay, South Korea

Benthic ecosystem in Gwangyang Bay, a fast developing industrial area with steel production, port container handling, petroleum and other chemical processing in South Korea was studied. The average levels of polychlorinated biphenyls (ΣPCB) in the benthic components were: seawater 2.99 ± 0.13 (ng/L); sediment 294 ± 118 (ng/g TOC); [biota=ng/g lipid] starfish 92; prawn 131 ± 2; mussels 127 ± 22; crab 182 ± 114; clam 187; polychaeta 215; sea cucumber 497 ± 90; squill 603 ± 38; fish 396 ± 159. Levels in the inner bay samples were higher than the outer bay samples suggesting land based pollution. Good correlation (r(2)=0.79; p<0.05) existed between PCB concentration and lipid content indicating partitioning processes in action. PCB signature in the abiotic and biotic components shows enrichment of lower chlorinated congeners emitted by a unique source nearby, viz. steel manufacturing plant.