Gravitational wave emission from a companion black hole in the presence of an accretion disc around a super-massive Kerr black hole

Gravitational wave signal characteristics from a binary black hole system in which the companion moves through the accretion disc of the primary are studied. We chose the primary to be a super-massive  ( M = 10⁸ M_⊙)  Kerr black hole and the companion to be a massive black hole  ( M = 10⁵ M_⊙)  to clearly demonstrate the effects. We show that the drag exerted on the companion by the disc is sufficient to reduce the coalescence time of the binary. The drag is primarily due to the fact that the accretion disc on a black hole deviates from a Keplerian disc and becomes sub-Keplerian due to inner boundary condition on the black hole horizon. We consider two types of accretion rates on to the companion. The companion is deeply immersed inside the disc and it can accrete at the Bondi rate which depends on the instantaneous density of the disc. However, an accretion disc can also form around the smaller black hole and it can accrete at its Eddington rate. Thus, this case is also studied and the results are compared. We find that the effect of the disc will be significant in reducing the coalescence time and one needs to incorporate this while interpreting gravitational wave signals emitted from such a binary system.     

Water Intake and Utilization in Mithun (Bos frontalis):Effect of Environmental Temperature, Rearing System and Concentrate Feed Supplement

Seasonal and sexual variations as well as the effect of dry feed supplement on total drinking water intake and its utilization were observed in mithun (Bos frontalis)-a semi-wild animal found in North Eastern Hill Region (NEHR) of India. In a completely randomized design, twelve adult mithuns (B. frontalis) as per their sex and body weight were assigned in two different rearing systems (free grazing and free grazing with dry concentrate feed supplementation), and ten growing male mithuns as per their body weight assigned in two different levels of dry concentrate feed supplementation (1.0 kg and 2.0 kg dry concentrate feeds on green forage based diet) and in two different seasons (summer and winter). It was observed that the environmental temperature had a significant effect on drinking water intake by mithuns. Drinking water consumption (per unit of body weight) was significantly (P < 0.05) higher in summer than in winter. Supplementation of concentrate feed on free grazing animals resulted in increase in water consumption. Total water consumption (drinking as well as performed water) was found to be 15.18 litres per 100 kg body weight by growing mithun. Feed dry matter and digestible nutrient intakes by growing mithun were observed to be increased with the increase of supplementation of dry concentrate feed. Roughage to concentrate ratio did not affect the nutrient digestibility. Mithun calves drank an average of 4.30 litres water for each kg of dry matter intake. Metabolic water was significantly (P<0.01) increased with the increase of supplementation of concentrate feed whereas water turn over, which depends upon the body weight of the animals, did not differ significantly on offering of lower or higher level of dry feed. Faecal water loss of growing mithun was decreased with the increase in intake of concentrate feed and was estimated to be 33～46% of total water intake. Excretion of water through faeces of mithun was about 3.8% of body weight. It could, therefore, be inferred that water intake by mithun varied with seasons, rearing systems and dry feed consumption. As far as the water nutrition is concerned, it is needed to give an attention while feeding mithun in summer with dry feed supplementation under semi-intensive system of rearing.     

ANALYSIS OF ROCKBOLT REINFORCEMENT USING BEAM-COLUMN THEORY

A simple analytical procedure that applies classical beam-column theory for evaluating passive rockbolt roof reinforcement is presented in this paper. The analytical model is derived from first principles and is capable of modelling any number of reinforcing bolts. Each rockbolt is modelled as a linear spring and the model allows for non-uniform bolt spacing. In this study the rock beam is assumed to be isotropic and linearly elastic for the sake of simplicity. However, the analytical model can be extended to include anisotropic rockmass as well as inelastic material behaviour. The solution to the coupled set of governing equations is obtained by using a simple numerical solution procedure. The results from the analytical model indicate that the critical buckling load of a rock beam is strongly influenced by the ambient rock modulus. For salt-rock excavations the rock modulus typically declines with time due to various phenomena, and a diminished modulus could seriously compromise roof stability. The other main conclusion of this study is that rockbolts loose their effectiveness in restraining a roof beam once its critical buckling load is approached. In such a situation, increasing bolt stiffness does not improve its reinforcing action on a roof beam but it enhances the possibility of bolt failure due to anchor pull-out. © 1997 by John Wiley & Sons, Ltd. Int. J. Numer. Anal. Meth. Geomech., vol. 21, 241–253 (1997)     

Application of Agro‐Based Biomasses for Zinc Removal from Wastewater – A Review

Zinc remediation of aqueous streams is of special concern due to its highly toxic and persistent nature. Conventional treatment technologies for the removal of zinc are not economical and further generate huge quantity of toxic chemical sludge. Biosorption is emerging as a potential alternative to the existing conventional technologies for the removal of metal ions from aqueous solutions. Mechanisms involved in the biosorption process include chemisorption, complexation, adsorption–complexation on surface and pores, ion exchange, microprecipitation, heavy metal hydroxide condensation onto the bio surface, and surface adsorption. Biosorption largely depends on parameters such as pH, the initial metal ion concentration, biomass concentration, presence of various competitive metal ions in solution, and to a limited extent on temperature. Biosorption using biomass such as agricultural wastes, industrial residues, municipal solid waste, biosolids, food processing waste, aquatic plants, animal wastes, etc., is regarded as a cost‐effective technique for the treatment of high volume and low concentration complex wastewaters containing zinc metal. Very few reviews are available where readers can get an overview of the sorption capacities of agro based biomasses used for zinc remediation together with the traditional remediation methods. The purpose of this review article is to provide the scattered available information on various aspects of utilization of the agro based biomasses for zinc metal ions removal. An extensive table summarizes the sorption capacities of various adsorbents. These biosorbents can be modified using various methods for better efficiency and multiple reuses to enhance their applicability at industrial scale. We have incorporated most of the valuable available literature on zinc removal from waste water using agro based biomasses in this review.     

Geotechnical assessment of cut slopes in the landslide-prone Himalayas: rock mass characterization and simulation approach

Natural Hazards - The roadway networks serve as arteries for the ongoing socio-economic activities within the Himalayan region. The perilous conditions of geologically active and fragile terrain...     

Soil erosion potential hotspot zone identification using machine learning and statistical approaches in eastern India

Natural Hazards - Land degradation is very severe in the subtropical monsoon-dominated region due to the uncertainty of rainfall in the long term, and most of the rainfall occurs with high...     

Uncertainty of soil erosion modelling using open source high resolution and aggregated DEMs

Digital Elevation Model (DEM) is one of the important parameters for soil erosion assessment. Notable uncertainties are observed in this study while using three high resolution open source DEMs. The Revised Universal Soil Loss Equation (RUSLE) model has been applied to analysis the assessment of soil erosion uncertainty using open source DEMs (SRTM, ASTER and CARTOSAT) and their increasing grid space (pixel size) from the actual. The study area is a part of the Narmada river basin in Madhya Pradesh state, which is located in the central part of India and the area covered 20,558 km². The actual resolution of DEMs is 30 m and their increasing grid spaces are taken as 90, 150, 210, 270 and 330 m for this study. Vertical accuracy of DEMs has been assessed using actual heights of the sample points that have been taken considering planimetric survey based map (toposheet). Elevations of DEMs are converted to the same vertical datum from WGS 84 to MSL (Mean Sea Level), before the accuracy assessment and modelling. Results indicate that the accuracy of the SRTM DEM with the RMSE of 13.31, 14.51, and 18.19 m in 30, 150 and 330 m resolution respectively, is better than the ASTER and the CARTOSAT DEMs. When the grid space of the DEMs increases, the accuracy of the elevation and calculated soil erosion decreases. This study presents a potential uncertainty introduced by open source high resolution DEMs in the accuracy of the soil erosion assessment models. The research provides an analysis of errors in selecting DEMs using the original and increased grid space for soil erosion modelling.     

Landslide Susceptibility Analysis of Shiv-Khola Watershed, Darjiling: A Remote Sensing & GIS Based Analytical Hierarchy Process (AHP)

In the present study, Remote Sensing Technique and GIS tools were used to prepare landslide susceptibility map of Shiv-khola watershed, one of the landslide prone part of Darjiling Himalaya, based on 9 landslide inducing parameters like lithology, slope gradient, slope aspect, slope curvature, drainage density, upslope contributing area, land use and land cover, road contributing area and settlement density applying Analytical Hierarchy Approach (AHA). In this approach, quantification of the factors was executed on priority basis by pair-wise comparison of the factors. Couple comparing matrix of the factors were being made with reasonable consistency for understanding relative dominance of the factors as well as for assigning weighted mean/prioritized factor rating value for each landslide triggering factors through arithmetic mean method using MATLAB Software. The factor maps/thematic data layers were generated with the help of SOI Topo-sheet, LIIS-III Satellite Image (IRS P6/Sensor-LISS-III, Path-107, Row-052, date-18/03/2010) by using Erdas Imagine 8.5, PCI Geomatica, Arc View and ARC GIS Software. Landslide frequency (%) for each class of all the thematic data layers was calculated to assign the class weight value/rank value. Then, weighted linear combination (WLC) model was implied to determine the landslide susceptibility coefficient value (LSCV or ??M??) integrating factors weight and assigned class weight on GIS platform. Greater the value of M, higher is the propensity of landslide susceptibility over the space. Then Shivkhola watershed was classified into seven landslide susceptibility zones and the result was verified by ground truth assessment of existing landslide location where the classification accuracy was 92.86 and overall Kappa statistics was 0.8919.     

Evaluation and augmentation of safe drinking water supply schemes in Salur Mandal,Vizainagaram district,Andhra Pradesh

In order to assess the groundwater potentiality and augmentation of water supply schemes, estimation of the safe yield, well loss, formation loss, horse power of pump, depth of pump installation and duration of the pumping are essential. These parameters are estimated either by means of in-situ test or laboratory test. But the applicability of result from the laboratory test has limitations while in-situ tests give real representation of individual well of aquifer. The most common in-situ test is pumping test performed on well, which involves measurement of the fall and rise of water level with respect to time. The changes in water level (drawdown/recovery) and its quality are caused due to pumping of water from the well. Such study was carried out in Salur Mandal, Vizainagaram, Andhra Pradesh, India.     

Microbial mat structures in profile: The Neoproterozoic Sonia Sandstone,Rajasthan, India

Ubiquitous microorganisms, especially cyanobacteria preferably grow on the sediment surface thereby producing microbial mats. In the absence of grazers and bioturbators, microbial mat is a unique feature of the Proterozoic. Most of the papers so far published described a wide variety of bed surface microbial mat structures with rare illustrations from sections perpendicular to bedding. Nonetheless, bed surface exposures are relatively rare in rock records. This limitation of bed surface exposures in rock records suggest that a study of microbial mats in bed-across sections is needed. The 60 m thick coastal marine interval of the Sonia Sandstone Formation is bounded between two terrestrial intervals, a transgressive lag at the base and an unconformity at the top, and has been chosen for exploration of microbial mat structures in bed-across sections. A wide variety of microbial mat-induced structures in bed-across sections are preserved within the coastal interval of the Sonia Sandstone. Though many of these structures are similar in some aspects with bed surface structures, some of those presented here are new. The palaeogeographic range of these microbial structures extends from supralittoral to neritic. Diagenetic alterations of microbial mats produce pyrite and those zones are suitable for the preservation of microbial remains. SEM and EDAX analyses show fossil preservation of filamentous microbial remains that confirm the presence of microbial mats within the coastal interval of the Sonia Sandstone. Effects of proliferation of microbial mats in the siliciclastic depositional setting are numerous. The mat-cover on sediment surfaces hinders reworking and/or erosion of the sediments thereby increases the net sedimentation rate. Successive deposition and preservation of thick microbial mat layer under reducing environments should have a great potential for hydrocarbon production and preservation and therefore these Proterozoic formations could be a target for exploration.