Fault seal prediction of seismic-scale normal faults in porous sandstone: A case study from the eastern Gulf of Suez rift,Egypt

A study of normal faults in the Nubian Sandstone Sequence, from the eastern Gulf of Suez rift, has been conducted to investigate the relationship between the microstructure and petrophysical properties of cataclasites developed along seismic-scale faults (slip-surface cataclasites) and smaller displacement faults (deformation bands) found in their damage zones. The results help to quantify the uncertainty associated with predicting the fluid flow behaviour of seismic-scale faults by analysing small faults recovered from core, a common procedure in the petroleum industry. The microstructure of the cataclasites was analysed as well as their single-phase permeability and threshold pressure. Faulting occurred at a maximum burial depth of ∼1.2 km. The permeability of deformation band and slip-surface cataclasites varies over ∼1.5 orders of magnitude for a given fault. Our results suggest that the lowest measured deformation band permeabilities provide a good estimate for the arithmetic-mean permeability of the major slip-surface cataclasites. This is because the cataclastic permeability reduction is mostly established early in the deformation history. Stress at the time of faulting rather than final strain appears to be the critical factor determining fault rock permeability. For viable predictions it is important that the slip-surface cataclasites and deformation bands originate from the same host. On the other hand, a higher uncertainty is associated with threshold pressure predictions, as the arithmetic-mean slip-surface cataclasite threshold pressure exceeds the highest measured deformation band threshold pressure by at least a factor of 4.     

Influence of Eurasian snow on Indian summer monsoon in NCEP CFSv2 freerun

The latest version of the state-of-the-art global land–atmosphere–ocean coupled climate forecast system of NCEP has shown considerable improvement in various aspects of the Indian summer monsoon. However, climatological mean dry bias over the Indian sub-continent is further increased as compared to the previous version. Here we have attempted to link this dry bias with climatological mean bias in the Eurasian winter/spring snow, which is one of the important predictors of the Indian summer monsoon rainfall (ISMR). Simulation of interannual variability of the Eurasian snow and its teleconnection with the ISMR are quite reasonable in the model. Using composite analysis it is shown that a positive snow anomaly, which is comparable to the systematic bias in the model, results into significant decrease in the summer monsoon rainfall over the central India and part of the Equatorial Indian Ocean. Decrease in the summer monsoon rainfall is also found to be linked with weaker northward propagation of intraseasonal oscillation (ISO). A barotropic stationary wave triggered by positive snow anomaly over west Eurasia weakens the upper level monsoon circulation, which in turn reduces the zonal wind shear and hence, weakens the northward propagation of summer monsoon ISOs. A sensitivity experiment by reducing snow fall over Eurasian region causes decrease in winter and spring snow depth, which in turn leads to decrease in Indian summer monsoon rainfall. Results from the sensitivity experiment corroborate with those of composite analysis based on long free run. This study suggests that further improvements in the snow parametrization schemes as well as Arctic sea ice are needed to reduce the Eurasian snow bias during winter/spring, which may reduce the dry bias over Indian sub-continent and hence predictability aspect of the model.     

Mode I crack propagation in concrete under fatigue: microscopic observations and modelling

In this study, three‐point bending tests were carried out on notched beams to investigate mode I crack propagation in plain concrete under fatigue. The first part of the study focused on microscopic observations of the crack growth features. Microscopic observations were made using the replica method associated with scanning electron microscopy (SEM). Observations of fatigue crack growth both on the surface and inside the specimens are presented as a comparison between the observed crack lengths and those estimated by the compliance calibration method. In the second part, a finite element model of mode I crack propagation under fatigue is presented. According to the cohesive crack concept, a cohesive force distribution on the crack at various loading stages is assumed, according to both the stress‐crack opening relation worked out by Hordijk (1991; Thesis, Technische Universiteit) and a new proposed relation with hysteresis loop. Finite element computation is used to evaluate the crack extension in the bending beams. Numerical predictions are discussed in comparison with experimental results. Copyright © 2002 John Wiley & Sons, Ltd.     

Bulk motion of ultrarelativistic conical blazar jets

Allowing for the conical shape of ultrarelativistic blazar jets with opening angles of a few degrees on parsec-scales, we show that their bulk Lorentz factors and viewing angles can be much larger than the values usually inferred by combining their flux-variability and proper-motion measurements. This is in accord with our earlier finding that such ultrarelativistic (Lorentz factor,  Γ > 30  ) conical jets can reconcile the relatively slow apparent motions of Very Long Baseline Interferometry (VLBI) knots in TeV blazars with the extremely fast flows implied by their rapid γ-ray variability. This jet geometry also implies that de-projected jet opening angles will typically be significantly underestimated from VLBI measurements. In addition, de-projected jet lengths will be considerably overestimated if high Lorentz factors and significant opening angles are not taken into account.     

Quantized Ray Theory for Non-Zero Focal Depths

The relation between p-Δcurves for surface and deep focus sources is investigated in order to construct synthetic body wave seismograms for non-zero focal depths by the quantized ray theory algorithm. The transformation of a surface focus p-Δ curve into a deep focus p-Δ curve is denned in terms of that curve which corresponds to surface focus rays reflected from the depth at which the deep focus is located. By analogy with the geometry of the surface focus formulation, paths of integration to obtain absolute travel-time and velocity-depth curves can be denned in the p-Δ plane. Explicit inversion from deep focus data is possible only when the velocity-depth structure above the depth of focus is known. Through a comparison of short period quantized ray theory synthetic seismograms with similar Cagniard-de Hoop computations, it is shown that quantized ray theory can be used for accurate predictions of body wave amplitude behaviour corresponding to a wide range of focal depths.     

Hydrogeology,water quality,and microbial assessment of a coastal alluvial aquifer in western Saudi Arabia: potential use of coastal wadi aquifers for desalination water supplies

Wadi alluvial aquifers located along coastal areas of the Middle East have been assumed to be suitable sources of feed water for seawater reverse osmosis facilities based on high productivity, connectedness to the sea for recharge, and the occurrence of seawater with chemistry similar to that in the adjacent Red Sea. An investigation of the intersection of Wadi Wasimi with the Red Sea in western Saudi Arabia has revealed that the associated predominantly unconfined alluvial aquifer divides into two sand-and-gravel aquifers at the coast, each with high productivity (transmissivity?=?42,000 m²/day). This aquifer system becomes confined near the coast and contains hypersaline water. The hydrogeology of Wadi Wasimi shows that two of the assumptions are incorrect in that the aquifer is not well connected to the sea because of confinement by very low hydraulic conductivity terrigenous and marine muds and the aquifer contains hypersaline water as a result of a hydraulic connection to a coastal sabkha. A supplemental study shows that the aquifer system contains a diverse microbial community composed of predominantly of Proteobacteria with accompanying high percentages of Gammaproteobacteria, Alphaproteobacteria and Deltaproteobacteria.     

Palaeoenvironments of the Continental Intercalaire fossil from the Late Cretaceous (Barremian-Albian) in North Africa: a case study of southern Tunisia

Through the Late Cretaceous, the southern shore of the Tethys Ocean migrated north and south over short distances. These vicissitudes are documented in the Continental Intercalaire, a long series of mainly non-marine sediments deposited in which dinosaur or other reptiles tracks and floral fossils are common across southern Tunisia (North Africa). A combined taxonomic, climatological, and palaentological studies provides independent lines of evidence for reconstruction of palaeoenvironments. The Bou Hedma/Boulouha and Sidi Aïch/Douiret Formations from southern Tunisia span the later part of the Late Cretaceous. During the Late Cretaceous the Tunisian territory was an archipelago, thus a particularly suitable area for a more detailed study. We investigated the area’s plant palaeo-biogeography, using fossil wood, with information from both a literature survey and investigation of new samples. The presence of fossils at great depths and distances from the present coastline, without signs of abrasion and far from areas of fluvial discharges does indicate that these remains have not been transported from the continent to the shelf, but have been preserved directly on the area that today correspond to the continental shelf. The climate during the accumulation of Barremian-Albian deposits in this region is inferred to have been warm and humid.     

Effect of diagenesis on clay mineralogy and organic matter in the Tunisian southern subsurface

This study aims to follow the effect of the diagenetic transformations on the clayey fraction and the organic matter of the Tunisian southern sub-surface. 61 samples from oil well named NWA-1 were recuperated for series of analyses. This study follows a comparative approach between the mineralogical, geochemical and petrographic studies. To discuss results from a statistical viewpoint, the Principal Component Analysis (PCA) was applied in order to find out any correlation between different components. The associated minerals quartz, feldspar, calcite, pyrite, anhydrite, gypsum, dolomite and olivine are also detected. These associated minerals remove by-products by the illitization reaction. The Index of Crystallinity (IC) of illite shows that, except some anomalies, the studied samples are between the epizone and the anchizone. Downward, samples show the effect of diagenetic processes and weak signs of low-grade metamorphism. As regards to the organic matter, values of Tmax range between 333°C and 463°C. On the other hand, potential hydrocarbon compounds (S2) show low values compared to those of (S1); but they maintain a similar variability from 0.63 to 21.12. SEM observations and X-ray microanalyses supported the formation of authigenic micro-quartz. The PCA of clay minerals, chemical components, and the depth shows three different populations. Feldspar, chlorite and quartz make up a population positively correlated with the depth. The second population seems to be indifferent to depth variation; it is made up of two sub-populations: the population of illite, gypsum and anhydrite, which is obtained by a counter clock rotation of depth population; and the population of pyrite, kaolinite, olivine phyllosilicate, which is obtained by an anticlockwise rotation of depth population. Third, the population of smectite, calcite and dolomite is inversely proportional to the depth variation. On the other hand, the PCA of TOC, Tmax, HI, S1, S2 and the depth make up a homogenous statistical population following the depth evolution.