Influence of steel mechanical properties on EBF seismic behaviour

Among the resisting systems suitable for the design of ductile steel structures, Eurocode 8 proposes MRFs and EBFs. The formers are considered more efficient in terms of ductility, but they suffer a strong weakness in the lateral stiffness, with following cumbersome design procedures to avoid excessive lateral displacements maintaining a quite high ductile behaviour under seismic actions. Often, the design process leads to not optimized structural members, oversized with respect to the minimum seismic requirements due to lateral deformation limitations. EBFs combine high lateral stiffness, due to bracing elements, and high dissipative capacities, provided by the plastic hinges developed in links. Eurocode 8 proposes a design procedure for EBF structures in which iterative checks are required to design links with a defined level resistance dependent on all the other links’ strength. The present paper investigates the seismic behaviour of EBFs using Incremental Dynamic Analyses (IDA) to explore their mechanical response under increasing seismic action. IDAs are executed considering the influence of variability of steel mechanical properties on the behaviour of EBFs, using seven artificial accelerograms according to Eurocode 8. The aims of IDAs are the probabilistic assessment of the response of the system with respect to the variability of the material properties, the analysis of structural safety and the ability of the structures to internally redistribute plastic phenomena during the earthquake. Structural safety conditions will be defined according to a multi-level performance approach. The paper presents also some final suggestions for possible improvements and design simplifications.     

Cluster analysis of soil CO<Subscript>2</Subscript> data from Mt. Etna (Italy) reveals volcanic influences on temporal and spatial patterns of degassing

Soil CO₂ concentration data were collected periodically from July 2001 to June 2005 from sampling site grids in two areas located on the lower flanks of Mt. Etna volcano (Paternò and Zafferana Etnea–Santa Venerina). Cluster analysis was performed on the acquired data in order to identify possible groups of sites where soil degassing could be fed by different sources. In both areas three clusters were recognised, whose average CO₂ concentration values throughout the whole study period remained significantly different from one another. The clusters with the lowest CO₂ concentrations showed time-averaged values ranging from 980 to 1,170 ppm vol, whereas those with intermediate CO₂ concentrations showed time-averaged values ranging from 1,400 to 2,320 ppm vol, and those with the highest concentrations showed time-averaged values between 1,960 and 55,430 ppm vol. We attribute the lowest CO₂ concentrations largely to a biogenic source of CO₂. Conversely, the highest CO₂ concentrations are attributed to a magmatic source, whereas the intermediate values are due to a variable mixing of the two sources described above. The spatial distribution of the CO₂ values related to the magmatic source define a clear direction of anomalous degassing in the Zafferana Etnea–Santa Venerina area, which we attribute to the presence of a hidden fault, whereas in the Paternò area no such oriented anomalies were observed, probably because of the lower permeability of local soil. Time-series analysis shows that most of the variations observed in the soil CO₂ data from both areas were related to changes in the volcanic activity of Mt. Etna. Seasonal influences were only observed in the time patterns of the clusters characterised by low CO₂ concentrations, and no significant interdependence was found between soil CO₂ concentrations and meteorological parameters. The largest observed temporal anomalies are interpreted as release of CO₂ from magma batches that migrated from deeper to shallower portions of Etna’s feeder system. The pattern of occurrence of such episodes of anomalous gas release during the observation period was quite different between the two studied areas. This pattern highlighted an evident change in the mechanism of magma transport and storage within the volcano’s feeder system after June 2003, interpreted as magma accumulation into a shallow (<8 km depth) reservoir.     

Time-space variation of volcano-seismic events at La Fossa (Vulcano, Aeolian Islands, Italy): new insights into seismic sources in a hydrothermal system

We investigated the relationship between volcano-seismic events, recorded at La Fossa crater of Vulcano (Aeolian Islands, Italy) during 2004-2006, and the dynamics of the hydrothermal system. During the period of study, three episodes of increasing numbers of volcano-seismic events took place at the same time as geothermal and geochemical anomalies were observed. These geothermal and geochemical anomalies have been interpreted as resulting from an increasing deep magmatic component of the hydrothermal fluids. Three classes of seismic events (long period, high frequency and monochromatic events), characterised by different spectral content and various similarity of the waveforms, have been recognised. These events, clustered mainly below La Fossa crater area at depths of 0.5–1.1 km b.s.l., were space-distributed according to the classes. Based on their features, we can infer that such events at Vulcano are related to two different source mechanisms: (1) fracturing processes of rocks and (2) resonance of cracks (or conduits) filled with hydrothermal fluid. In the light of these source mechanisms, the increase in the number of events, at the same time as geochemical and geothermal anomalies were observed, was interpreted as the result of an increasing magmatic component of the hydrothermal fluids, implying an increase of their flux. Indeed, such variation caused an increase of both the pore pressure within the rocks of the volcanic system and the amount of ascending fluids. Increased pore pressures gave rise to fracturing processes, while the increased fluid flux favoured resonance and vibration processes in cracks and conduits. Finally, a gradual temporal variation of the waveform of the hybrid events (one of the subclasses of long period events) was observed, likely caused by heating and drying of the hydrothermal system.     

Exploiting the use of physical information for the calibration of a lumped hydrological model

In hydrological modelling, the challenge is to identify an optimal strategy to exploit tools and available observations in order to enhance model reliability. The increasing availability of data promotes the use of new calibration techniques able to make use of additional information on river basins. In the present study, a lumped hydrological model—designed with the aim of utilizing remotely sensed data—is introduced and calibrated, adopting four different schemes that adopt, to varying extents, available physical information. The physically consistent conceptualization of the hydrological model used allowed development of a step by step calibration based on a combination of information, such as remotely sensed data describing snow cover, recession curves obtained from streamflow measurements, and time series of surface run‐off obtained with a baseflow mathematical filter applied to the streamflow time‐series. Results suggest that the use of physical information in the calibration procedure tends to increase model reliability with respect to approaches where the parameters are calibrated using an overall statistic based, considerably or exclusively, on streamflow data.     

Chemical and isotopic compositions of thermal springs,fumaroles and bubbling gases at Tacaná Volcano (Mexico–Guatemala): implications for volcanic surveillance

This study presents baseline data for future geochemical monitoring of the active Tacaná volcano–hydrothermal system (Mexico–Guatemala). Seven groups of thermal springs, related to a NW/SE-oriented fault scarp cutting the summit area (4,100m a.s.l.), discharge at the northwest foot of the volcano (1,500–2,000m a.s.l.); another one on the southern ends of Tacaná (La Calera). The near-neutral (pH from 5.8 to 6.9) thermal (T from 25.7°C to 63.0°C) HCO₃–SO₄ waters are thought to have formed by the absorption of a H₂S/SO₂–CO₂-enriched steam into a Cl-rich geothermal aquifer, afterwards mixed by Na/HCO₃-enriched meteoric waters originating from the higher elevations of the volcano as stated by the isotopic composition (δD and δ¹⁸O) of meteoric and spring waters. Boiling temperature fumaroles (89°C at ~3,600m a.s.l. NW of the summit), formed after the May 1986 phreatic explosion, emit isotopically light vapour (δD and δ¹⁸O as low as −128 and −19.9‰, respectively) resulting from steam separation from the summit aquifer. Fumarolic as well as bubbling gases at five springs are CO₂-dominated. The δ¹³C_CO2 for all gases show typical magmatic values of −3.6 ± 1.3‰ vs V-PDB. The large range in ³He/⁴He ratios for bubbling, dissolved and fumarolic gases [from 1.3 to 6.9 atmospheric ³He/⁴He ratio (R _A)] is ascribed to a different degree of near-surface boiling processes inside a heterogeneous aquifer at the contact between the volcanic edifice and the crystalline basement (⁴He source). Tacaná volcano offers a unique opportunity to give insight into shallow hydrothermal and deep magmatic processes affecting the CO₂/³He ratio of gases: bubbling springs with lower gas/water ratios show higher ³He/⁴He ratios and consequently lower CO₂/³He ratios (e.g. Zarco spring). Typical Central American CO₂/³He and ³He/⁴He ratios are found for the fumarolic Agua Caliente and Zarco gases (3.1 ± 1.6 × 10¹⁰ and 6.0 ± 0.9 R _A, respectively). The L/S (5.9 ± 0.5) and (L + S)/M ratios (9.2 ± 0.7) for the same gases are almost identical to the ones calculated for gases in El Salvador, suggesting an enhanced slab contribution as far as the northern extreme of the Central American Volcanic Arc, Tacaná.     

Three‐dimensional vorticity and time‐constrained evolution of the Main Central Thrust zone,Garhwal Himalaya (NW India)

Vorticity estimates based on porphyroclasts analysis are limited by the extrapolation to three dimensions of two‐dimensional data. We describe a 3D approach based on the use of X‐ray micro‐computed tomography that better reflects the real 3D geometry of the porphyroclasts population. This new approach for kinematic vorticity analysis in the Munsiari Thrust mylonites, the lower boundary of the Main Central Thrust zone (MCTz) in Indian Himalaya, indicates a large pure shear component during non‐coaxial shearing. ⁴⁰Ar/³⁹Ar ages of micas along the mylonitic foliation of the Munsiari and Vaikrita thrusts (the upper boundary of the MCTz) constrain thrust activity to 5–4 and 8–9 Ma, respectively. Available kinematic vorticity analyses of the Vaikrita mylonites suggest the dominance of a simple shear component. Combining these data, we suggest that the southward and structurally downward shift of deformation along the MCTz was accompanied by a progressive increase in the pure shear component in a general shear flow.     

Rare earth elements absorption patterns in grapevine “<Emphasis Type="Italic">Vitis vinifera</Emphasis> L.” cultivated in carbonate terrains (south-eastern Sicily,Italy)

Vitis vinifera L. vineyards grown on carbonate soil (Hyblean Plateau, SE Sicily) have been characterized in terms of rare earth elements (REEs) distribution. Results highlighted that the absorption of REEs by plants depends on the composition of the underlying soil, which in this case derives from limestone parent rock, allowing us to recognize the area of origin. Indeed, even slight differences in REEs content in soils may affect the absorption pattern of each grapevine cultivar. Importantly, the various parts of the plants showed differences in REEs absorption; such REEs fractionation is particularly evident in the leaf and juice samples. In general, the uptake and concentrations of REEs in plant tissues may be related to many factors such as geographical, climatic and lithological features. This is also pointed out by the statistical investigation, which took into account either the grapevine variety or each part of the plant. By taking into consideration both the grape variety and the type of soil, the present “multi-elemental” approach aims to provide a useful geochemical tool for assessing the geographical origin of the production area of wine.     

A physical analogue model to analyse interactions between tensile stresses and dissolution in carbonate slopes

A physical analogue model was developed to analyse the relationship between tensional states in rock masses, seepage and karst processes. Use was made of an experimental apparatus consisting of two hydraulic circuits realized by drilling two holes into each of two blocks of sampled limestone from the central Apennines (Italy). A static load (208.85 kg) was applied to one of the blocks in order to elicit tensile stresses within it. Physical and chemical monitoring data showed that the main process involved was temperature-dependent CaCO₃ dissolution. This process was more marked in the loaded block circuit, as Ca⁺⁺ concentration in circulated water reached 54 mg/L, whereas only 28 mg/L was reached in the unloaded one. The interaction between load and dissolution caused the observed opening of microcracks, as confirmed by further increase of water loss and by dilution in the loaded block circuit, resulting in a decrease of Ca⁺⁺ concentration. These findings were confirmed by recording additional water losses after increasing the load up to 445.05 kg. A finite difference numerical model showed that tensile stresses (max 20 kPa) within the loaded block were clustered at the intersection of the main joints with the flowpaths, thus representing points of preferential and accelerated dissolution.This study is part of a research project on analogical and numerical modelling for geological risk mitigation being conducted at CERI, Research Centre for Geological Risks of the University of Rome “La Sapienza” (Valmontone, Roma, Italy; http://www.ceri@uniroma1.it).