Prediction of creep characteristic of rock under varying environment

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.     

Application of magnetic susceptibility anisotropy technique to the study of geological structures in the Armorican massif, France

Magnetic susceptibility anisotropy analyses have been carried out on 300 samples of rock from various metamorphosed regions of Normandy and Brittany, within the northern half of the Armorican massif, to test the ability of the magnetic fabric method (in a relatively complex region where structures have been well charted) to delineate regional structures. The two major structural directions to emerge from the study were a ENE—WSW striking magnetic foliation plane, conforming to a Variscan direction of the Bocaine syncline in the Granville region of Normandy and a ESE—WNW striking magnetic foliation plane conforming to the Armorican direction in the Chateaulin syncline region of Brittany. The magnetic fabric of sites elsewhere confirmed localised structures and minor synclinal structures.

The major advantages of the technique of studying magnetic fabric over petrofabric are the speed at which magnetic fabric can be measured (2 minutes per sample compared with up to 24 h using X-ray goniometry techniques) and the sensitivity of the magnetic fabric to very slight stresses.     

Correlation between point load index and compressive strength for quartzite rocks

Summary The relationship of the point load test with uniaxial compressive strength was examined using quartzite rocks to substantiate the existing correlations.     

Effect of excavation stages on stress and pore pressure changes for an underground nuclear repository

This paper provides a brief overview of evolution of deformations, stresses, and pore pressures due to different excavation stages during construction of an URL. Excavation of a rockmass develops damage zone of finite width around the excavated zone which is associated with changes in permeability and affect the fluid flow mechanism. In this study, a coupled hydromechanical (HM) analysis for a water saturated porous rock mass has been done which is caused by sequential excavation and backfill of vertical disposal pit of an URL. For this purpose, an Atomic Energy of Canada Limited’s in-floor concept for a deep geologic repository suitable for Indian condition has been used. Changes in rock deformations, stresses, strains and mechanically induced pore pressure in an undrained condition, during excavation, as well as those caused by mechanically induced rock deformations after backfill of the disposal pit have been modeled. A three-dimensional finite difference tool FLAC^3D (Itasca Consulting Group Inc. FLAC-3D 1997) has been used for the analysis.     

Temporal change of glaciers area and geomorphometric parameters in Parbati valley,Himachal Pradesh,India

Temporal change in the glacier coverage is analyzed for the period between 1962 and 2003 in Parbati valley, Himachal Pradesh. It is observed that the total glacier cover has been decreased by 17% ranging between 8 and 100% for individual glacier. The pattern of de-glaciation shows a high degree of shrinkage in outer zone of Parbati valley, while least shrinkage is observed in the inner valley. The present study is conducted to establish relationship between glacio-geomorphic parameters and glaciers shrinkage pattern to predict the future glacier cover in warming scenario. A systematic change is observed for glacio-geomorphic parameters associated with temporal change in glacier cover. It is observed that mean and minimum elevation, slope, relief and duration of insolation have changed substantially. Maximum elevation, plan/profile curvatures and aspect have shown less change from 1962 to 2003. A correlation matrix between glacio-geomorphic parameters for glaciers between 1962 and 2003 shows that the recent glaciers are much more controlled by terrain characteristics than that in the recent past.     

The imprinting of aridity upon a lateritic landscape: an illustration from southwestern Australia

The southwestern region of Australia contains the Yilgarn Craton that has been exposed to subaerial weathering since mid-Proterozoic. The gently undulating landscape experienced lateritic weathering so that today variably dissected, deep in situ isovolumetrically weathered regolith is widespread. Imposition of a more arid climate since the Miocene with the cessation of effective external drainage has resulted in substantial geochemical modification of the highly porous regolith. This vast pore volume acts as a reservoir for complex solutions that may be highly saline, extremely acid to alkaline and reducing. Diverse precipitates have formed in the regolith including widespread occurrence of silcrete, calcrete, dolocrete, ferricrete and gypcrete together with localised occurrences of pyrite, alunite, jarosite, barite, halite and other salts. Clearing of bush land for agriculture in the 20th century increased recharge so that rising chemically active groundwaters are damaging farmland and infrastructure throughout the region. To cite this article: B. Gilkes et al., C. R. Geoscience 335 (2003).     

Cosmogenic and bomb-produced7Be in stratospheric air

Concentration of⁷Be has been measured in 15 air filters flown at 18·3 km in the latitudes 10 to 25°N and longitudes 80 to 96°W. Testing of nuclear weapons in atmosphere increased⁷Be considerably, on two occasions, above the expected cosmic-ray production level in the stratosphere. This provides evidence for the existence of interhemispheric mixing,via stratosphere.     

Electrical Resistivity Imaging technique to delineate coal seam barrier thickness and demarcate water filled voids

Exploration and exploitation of coal seams is one of the major resources for the energy sector in any country but at the same time water filled voids/water logged areas in the old workings of these seams are very critical problems for the coal mining industry. In such situations, disasters like inundation, landslides, collapsing of the old seams may occur. In this regard, it is necessary to find out the water saturated/water filled voids and zones in the mining areas. Since no established technique is available to find such zones, an experimental study using Electrical Resistivity Imaging (ERI) has been carried out in one of the coal mining areas near Dhanbad, to find out the feasibility of finding the barrier thickness and the water logged area in underground coal mines. The area under study forms part of Jharia coalfield in Dhanbad district, Jharkhand state. The coal bearing rocks of Barakar Formation of Lower Permian age (Gondwana period) occur in the area under a thin cover (10 m to15 m) of soil and or alluvium. Coal bearing Barakar Formations consist mainly of sandstone of varying grain size, intercalation of shale and sandstone, grey and carbonaceous-shale and coal seams. Since the water saturation reduces the resistivity of a formation to a large extent, water filled voids and old coal workings are expected to have significant resistivity contrast with the surrounding host rock. Hence, ERI technique was applied in such an environment as this technique uses high-density data acquisition both laterally and vertically by using multiple number of electrodes. Along with ERI, mise-à-la-masse (also called charged body) technique was also employed at one of the promising sites to find out the connectivity of water logged areas and also detection of these old workings from the surface measurements was analyzed. The interpreted 2D resistivity sections have clearly indicated the water bearing zone(s) along the profile which was well confirmed with the existing water level in the nearby borewells. On the other hand, this technique did not identify the size of the coal pillar and gallery (air filled voids), which might be due to the small size of the voids (i.e. about 2 m × 2 m) below a depth of 15m and more but have indicated altogether as a high resistive zone ranging from 600–1000 Ohm-m.     

Hydrogeochemical Characterization and Groundwater Quality of Jamshedpur Urban Agglomeration in Precambrian Terrain,Eastern India

This paper reports petrography, geochemistry and Rb-Sr age data on the rare metal bearing Neoarchean fertile (Nb-Ta) granite at Allapatna and elucidates its petrogenesis and role in Nb-Ta-Li-Be mineralization. The Allapatna granite (AG) intrudes the Tonalitic-Trondhjemitic - Granodioritic (TTG) Peninsular Gneiss and analysed SiO₂ (72.3-75.6 wt%), K₂O (4.0-5.7wt%), Na2O (3.0-4.4wt%), CaO (0.7-1wt%), MgO (0.13-0.25wt%) and K₂O/Na₂O (>1) indicating evolved nature. The presence of muscovite, biotite and garnet in the mode, peraluminous nature and high initial ⁸⁷Sr/⁸⁶Sr ratio (0.7284±0.0083) attest to their S-type characteristics. Varying Nb/Ta ratio and high Li with moderate abundance of Cs further indicate affinity to Li-Cs-Ta (LCT) type granite-pegmatite system. TheAG showing whole rock Rb-Sr isochron age of 2803± 68 Ma, is the oldest reported fertile granite in India parental to rare metal pegmatites hosting Nb-Ta, Be, and Li resources. Partial melting of a mixed source consisting of both basement TTG rocks and metapelites has generated such type of granitic magma. Fractionation of such granitic magma possibly has given rise to the rare metal (Ta-Nb-Li-Be) bearing pegmatites intruding the nearby schist belt.     

Floral biodiversity and geology of the Talcher Basin,Orissa, India during the Permian–Triassic interval

The review paper provides an updated account of the previous and recently published records concerning the palaeobiology and the geology of the Talcher Basin of Orissa State, India. We conclude that fossil floral species in this basin originated in the earliest Permian Talchir Formation and evolved and diversified through the Karharbari Fm., Barakar Fm., Barren Measures Fm. and the uppermost Kamthi Fm. (Late Permian–Triassic). The megaflora and the palynology of the different formations of the basin are also discussed briefly. The geological setting of the basin along with the status of different formations (especially the Kamthi Formation) has been redefined. The post‐Barakar Fm. rocks, earlier retained in the Raniganj/Kamthi, Panchet and Mahadeva formations in this basin, have been critically assessed and redefined as the Lower and Upper Kamthi formations of Late Permian and Triassic ages, respectively. Accordingly, the geological map of the basin has been modified. Permian deposits (particularly the Barakar and the lower Kamthi formations) not only have the best preserved flora but also possess the highest diversity, whereas the upper Kamthi Triassic sediments have a meagre number of taxa. The plant diversity of the basin has been discussed in detail to interpret the development of the flora, evolutionary trends and palaeoenvironments of the basin. The patchy Gangamopteris vegetation of the Talchir glacial phase has ultimately evolved and diversified through time (Karharbari Fm. to Lower Kamthi Fm.) and gave rise to the thick dense swampy forests consisting of large Glossopteris trees and other shade‐loving under‐storied pteridophytes. Several groups of plants including spores and pollen have disappeared in a ladder pattern during the Permian–Triassic interval (Lower Kamthi–Upper Kamthi Fm.) and, similarly, in steps, many new fore‐runners appeared in the Upper Kamthi Formation. Records of marine acritarchs and ichnofossils in this basin at various Permian–Triassic levels demonstrate that there were marine influences. These features suggest a paralic (coastal marine to deltaic) mode of origin of the coal beds and associated sediments in the basin. The present study also advocates the continued survival of plants, rather than a mass extinction near the vicinity of the Permian–Triassic (P–T) boundary in this basin. Copyright © 2012 John Wiley & Sons, Ltd.