Early In-orbit Performance of Scanning Sky Monitor Onboard AstroSat

We report the in-orbit performance of Scanning Sky Monitor (SSM) onboard AstroSat. The SSM operates in the energy range 2.5 to 10 keV and scans the sky to detect and locate transient X-ray sources. This information of any interesting phenomenon in the X-ray sky as observed by SSM is provided to the astronomical community for follow-up observations. Following the launch of AstroSat on 28th September, 2015, SSM was commissioned on October 12th, 2015. The first power ON of the instrument was with the standard X-ray source, Crab in the field-of-view. The first orbit data revealed the basic expected performance of one of the detectors of SSM, SSM1. Following this in the subsequent orbits, the other detectors were also powered ON to find them perform in good health. Quick checks of the data from the first few orbits revealed that the instrument performed with the expected angular resolution of 12’ \(\times \) 2.5\(^\circ \) and effective area in the energy range of interest. This paper discusses the instrument aspects along with few on-board results immediately after power ON.     

High‐ to ultrahigh‐temperature metamorphism in the lower crust: An example resulting from Hikurangi Plateau collision and slab rollback in New Zealand

Lower crustal xenoliths erupted from an intraplate diatreme reveal that a portion of the New Zealand Gondwana margin experienced high‐temperature (HT) to ultrahigh‐temperature (UHT) granulite facies metamorphism just after flat slab subduction ceased at c. 110–105 Ma. P–T calculations for garnet–orthopyroxene‐bearing felsic granulite xenoliths indicate equilibration at ~815 to 910°C and 0.7 to 0.8 GPa, with garnet‐bearing mafic granulite xenoliths yielding at least 900°C. Supporting evidence for the attainment of HT and UHT conditions in felsic granulite comes from re‐integration of exsolution in feldspar (~900–950°C at 0.8 GPa), Ti‐in‐zircon thermometry on Y‐depleted overgrowths on detrital zircon grains (932°C ± 24°C at aTiO₂ = 0.8 ± 0.2), and correlation of observed assemblages and mineral compositions with thermodynamic modelling results (≥850°C at 0.7 to 0.8 GPa). The thin zircon overgrowths, which were mainly targeted by drilling through the cores of grains, yield a U–Pb pooled age of 91.7 ± 2.0 Ma. The cause of Late Cretaceous HT‐UHT metamorphism on the Zealandia Gondwana margin is attributed to collision and partial subduction of the buoyant oceanic Hikurangi Plateau in the Early Cretaceous. The halt of subduction caused the fore‐running shallowly dipping slab to rollback towards the trench position and permitted the upper mantle to rapidly increase the geothermal gradient through the base of the extending (former) accretionary prism. This sequence of events provides a mechanism for achieving regional HT–UHT conditions in the lower crust with little or no sign of this event at the surface.     

Evaluation of a probabilistic approach to simulation of alkalinity and electrical conductivity at a river bank filtration site

In river bank filtration, impurities present in the river water travel with the bank filtrate towards the pumping well. During this passage, certain types of impurities, such as turbidity, total coliform, and so forth, may get attenuated; however, it is interesting to note that some of the instant raw river water quality parameters, such as alkalinity and electrical conductivity, increase after the passage of water through the porous medium. This occurs because water, when passing through the soil pores, absorbs many of the solutes that cause an increase in alkalinity and electrical conductivity. Measurements at a river bank filtration site for a year showed that alkalinity of 116–32 mg l^?1 in river water increased to 222.4–159.9 mg l^?1 in the river bank filtered water. Likewise, the electrical conductivity increased from 280–131 μS cm^?1 to 462–409.6 μS cm^?1. This study uses a probabilistic approach for investigating the variation of alkalinity and electrical conductivity of source water that varies with the natural logarithm of the concentration of influent water. The probabilistic approach has the potential of being used in simulating the variation of alkalinity and electrical conductivity in river bank filtrate. Copyright © 2011 John Wiley & Sons, Ltd.     

Abrupt behaviours of streamflow and sediment load variations of the Yangtze River basin,China

Monthly sediment load and streamflow series spanning 1963–2004 from four hydrological stations situation in the main stem of the Yangtze River, China, are analysed using scanning t‐test and the simple two‐phase linear regression scheme. Results indicate significant changes in the sediment load and streamflow from the upper reach to the lower reach of the Yangtze River. Relatively consistent positive coherency relations can be detected between streamflow and sediment load in the upper reach and negative coherency in the middle and lower reaches. Interestingly, negative coherency is found mainly for larger time scales. Changes in sediment load are the result mainly of human influence; specifically, the construction of water reservoirs may be the major cause of negative coherency. Accentuating the human influence from the upper to the lower reach results in inconsistent correlations between sediment load and streamflow. Decreasing sediment load being observed in recent years has the potential to alter the topographical properties of the river channel and the consequent development and recession of the Yangtze Delta. Results of this study are of practical significance for river channel management and evaluation of the influence of human activities on the hydrological regimes of large rivers. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluoride enrichment in aquifers of the Thar Desert: controlling factors and its geochemical modelling

The groundwater is the only source of drinking water in the Jaisalmer district of Rajasthan, India. The study area is a part of the Thar Desert. It has low and scattered population and no industries; hence, the possibility of anthropogenic input of fluoride is almost negligible. Thus, the enrichment of fluoride is only possible due to geochemical processes taking place in the groundwater of the region. A total of 100 groundwater samples, 34 samples from Jaisalmer and 66 samples from the Pokharan administrative blocks, were collected. It was observed that the concentration of fluoride ranged from 0.08 mg/l to 4.56 mg/l in the groundwater of Jaisalmer and from 0.56 mg/l to 6.60 mg/l in the samples of the Pokharan block. The alkaline condition (average pH, 7.7 ± 0.22 and 8.01 ± 0.25 in Jaisalmer and the Pokharan administrative block, respectively) in the region favours fluorite dissolution. Ion exchange, dissolution of calcite, semi‐arid climate, alkaline conditions and weathering are responsible for fluoride enrichment in the groundwater of the study area. Copyright © 2012 John Wiley & Sons, Ltd.     

The influence of dam and lakes on the Yangtze River streamflow: long‐range correlation and complexity analyses

Employing long‐range correlation, complexity features and clustering, this study investigated the influence of dam and lake‐river systems on the Yangtze River flow. The impact of the Gezhouba Dam and the lake systems on streamflow was evaluated by analysing daily streamflow records at the Cuntan, the Yichang and the Datong station. Results indicated no evident influence of the Gezhouba Dam on streamflow changes. Distinct differences in scaling behaviour, long‐range correlation and clustering of streamflow at the Datong station when compared with those at the Cuntan and Yichang stations undoubtedly showed the influence of water storage and the buffering effect of the lake systems between the Datong station and other two hydrological stations on streamflow in the lower Yangtze River basin. Decreased regularity, enhanced long‐range correlation and increased clustering of streamflow in the lower Yangtze River basin due to the effect of water storage of the lake systems were corroborated. Copyright © 2011 John Wiley & Sons, Ltd.     

Breach erosion of earthfill dams (BEED) model

A computer model has been developed for simulation of breach erosion of earthfill dams (BEED). The model incorporates the processes of surface erosion and slope sloughing to simulate breach enlargement. Depletion of reservoir water is approximated by a volume continuity equation while broad-crested weir hydraulics is utilized to describe flow over and through the breach. Due to the implicit form of these equations, an iterative solution is proposed with convergence achieved within only a few iterations. The BEED model is written in both FORTRAN 77 and BASIC computer languages. Testing of the model using historical data of the failures of Teton and Huaccoto dams showed that timing, shape, and magnitude of the predicted outflow hydrograph were adequately simulated by this model. The same is true for the dimensions of the terminal breach. A sensitivity analysis indicated that internal friction angle and the relation for surface erosion were the major factors affecting the model results.     

A simple criterion for the machinability of hard rocks

Conclusions The application of mechanical methods for rapid excavation requires more detailed and precise knowledge of the site, but there is no single parameter which can provide a comprehensive measure for the selection and performance of a tunnel boring machine.The machinability index proposed in this paper is based on four different parameters which influence the performance of a tunnelling machine and are widely accepted by the engineers and geologists. In order to develop a comprehensive measure regarding the borability of rocks,in situ conditions must be evaluated. The machinability index coupled with thein situ information would facilitate judicious decisions regarding the application and selection of tunnel boring machines.The geological conditions and rock characteristics cannot be controlled but their knowledge can prevent costly mistakes in equipment selection and assist in identifying alternative excavation systems, therefore a thorough site investigation can substantially reduce the economic and technical risks associated with tunnelling and mine development.     

Temporal change detection in river courses and flood plains in an arid environment through satellite remote sensing

Temporal changes in ephemeral river courses and associated flood plains, which could not be detected by Landsat MSS due to its poor spatial resolution of 80m, have been identified and mapped within 10% accuracy by Landsat TM False colour composite because of its higher spectral and spatial resolution of 30 m. Over a period of 28 years (1958–86) the river courses widened upto 1.8 times through bank erosion due to the recurring flash floods. The flash floods have also caused morphological, soil fertility and landuse changes in the associated flood plains, which could also be monitored by the Landsat TM.