Distribution of the indigenous microorganisms and mechanisms of their orientational activation in Daqing Oilfield

The distribution of indigenous microorganisms was surveyed in Block 1 of Daqing Oilfield. Based on this survey, the indigenous microorganisms in the formation water were activated with different activator systems at the simulated stratum ecological environment. The changes of the number of bacteria of various physiological groups were determined during the process of activation. Also changes of pH value and composition of gas productions were analyzed at the end of culturing. The results showed that the selected block formation water contained a great number of saprophytic bacteria, hydrocarbon-oxidizing bacteria, fermentative bacteria, methane-producing bacteria and sulfate-reducing bacteria. Under the conditions that the growth of sulfate-reducing bacteria was controlled the block had the potential to enhance oil recovery by activating beneficial bacteria. The growth of sulfate-reducing bacteria can be inhibited through the activation of nitrate-reducing bacteria. The number of nitrate-reducing bacteria reached 10⁶–10⁷ cells/mL, but sulfate-reducing bacteria reached only 0–45 cells/mL in A system. Methane-producing bacteria can be activated by C, D activators. The relative content of biological methane in the light hydrocarbon gas reached 80% in C, D systems. B activator was conducive to the propagation of acid-producing bacteria, so that the pH value of the culture medium decreased from 7.5 to around 5.0. Hydrocarbon-oxidizing bacteria can be activated by various activator systems. There was low molecular light hydrocarbon in gas production according to the analysis of gas chromatograph. According to the content of methane and the number of methane-producing bacteria, methane only can be generated through activating methane-producing bacteria. By choosing different activator systems, various populations of indigenous microorganisms can be activated accordingly.     

Climatic and geographic factors affect ecosystem multifunctionality through biodiversity in the Tibetan alpine grasslands

Ecosystem multifunctionality(EMF), the simultaneous provision of multiple ecosystem functions, is often affected by biodiversity and environmental factors. We know little about how the interactions between biodiversity and environmental factors affect EMF. In this case study, a structural equation model was used to clarify climatic and geographic pathways that affect EMF by varying biodiversity in the Tibetan alpine grasslands. In addition to services related to carbon, nitrogen, and water cycling, forage supply, which is related to plantproductivity and palatability, was included in the EMF index. The results showed that 72% of the variation in EMF could be explained by biodiversity and other environmental factors. The ratio of palatable richness to all species richness explained 8.3% of the EMF variation. We found that air temperature, elevation, and latitude all affected EMF, but in different ways. Air temperature and elevation impacted the aboveground parts of the ecosystem, which included plant height, aboveground biomass, richness of palatable species, and ratio of palatable richness to all species richness. Latitude affected EMF by varying both aboveground and belowground parts of the ecosystem, which included palatable speciesrichness and belowground biomass. Our results indicated that there are still uncertainties in the biodiversity–EMF relationships related to the variable components of EMF, and climatic and geographic factors. Clarification of pathways that affect EMF using structural equation modeling techniques could elucidate the mechanisms by which environmental changes affect EMF.     

A Novel Multiple-Kernel Support Vector Regression Algorithm for Estimation of Water Quality Parameters

Natural Resources Research - The quality of surface waters plays a key role in the sustainability of ecological systems. Measuring water quality parameters (WQPs) is of high...     

Resolving the landfill siting impasse: modelling technocratic and indigenous perspectives using GIS multicriteria approach

Increase in waste generation calls for an effective waste management as this has become a necessity for environmental sustainability. Several methods are adopted in managing waste, which include waste reduction, reuse, thermal treatment, recycling and landfilling. The landfill method is recognised as the most used of all the waste management methods in developing countries such as Ghana. However, the selection of a suitable landfill site is very difficult and tedious. This is because it involves a consideration of many factors such as environmental, topographic, economic, socio-cultural and civil engineering. This research sought to identify a suitable landfill site by applying GIS multicriteria and weighted overlay approach in the Bongo District of Northern Ghana. The analysis relied on criteria and weights provided by the technocrats and the indigenes in the district as a way of demonstrating how landfill siting impasse can be resolved by incorporating the various stakeholders. The results obtained provided clear areas for landfill sites in the study area from the technocratic and the indigenous perspectives. However, the technocratic perspective failed to include an important cultural criterion, sacred groves, as a factor. The indigenous perspective also compromised on the factor related to nearness to residential areas, and is equally not sufficient on its own. The optimal landfill sites, which meets the expectations of both the technocrats and indigenes, was identified. This perspective has produced technically favourable and socio-culturally acceptable landfill site. However, it is recommended an environmental impact assessment (EIA) be conducted to identify the full environmental and social cost of the site. It is concluded that in landfill site selection much attention be given to cultural factors in the same way as the technical factors.     

Understanding the implications of the EU-LULUCF regulation for the wood supply from EU forests to the EU

Background

In June 2018, the European Parliament and Council of the European Union adopted a legislative regulation for incorporating greenhouse gas emissions and removals from Land Use, Land Use Change and Forestry (EU-LULUCF) under its 2030 Climate and Energy Framework. The LULUCF regulation aim to incentivise EU Member States to decrease greenhouse gas emissions and increase removals in the LULUCF sector. The regulation, however, does not set a target for increasing the LULUCF carbon sink, but rather includes a ‘no net debit’ target for LULUCF (Forests and Agricultural soils). For Managed Forest Land (MFL) an accounting framework with capped credits for additional mitigation against a set forest reference level (FRL) was agreed for 2021–2030. The FRL gives the projected future carbon sink in the two compliance periods 2021–2025 and 2026–2030 under “continuation of forest management practices as they were in the reference period 2000–2009”. This FRL was disputed by some Member States as it was perceived to put a limit on their future wood harvesting from MFL. Here we simulated with the EFISCEN European forest model the “continuation of forest management practices” and determined the corresponding wood harvest for 26 EU countries under progressing age classes.

Results

The simulations showed that under “continuation of forest management practices” the harvest (wood removals) in the 26 EU countries as a whole can increase from 420 million m³/year in 2000–2009 to 560 million m³/year in 2050 due to progressing age classes. This implies there is a possibility to increase absolute wood harvests without creating debits compared to the forest reference level. However, the manner in which ‘continuation of forest management’ developed with a progressing age class development over time, meant that in some countries the future harvesting exceeded 90% of the increment. Since this generally is considered to be unsustainable we additionally set a harvesting cut-off as max 90% of increment to be harvested for each individual country as a possible interpretation of sustainability criteria that are included in the regulation. Using this additional limit the projected harvest will only increase to 493 million m³/year.

Conclusions

The worry from Member States (MS) that the FRL will prevent any additional harvesting seems unwarranted. Due to differences between Member States concerning the state of their forest resources, the FRL as a baseline for harvesting works out very differently for the different Member States. The FRL may have other unforeseen consequences which we discuss. Under all scenarios the living forest biomass sink shows a decline. This can be counteracted through incentivising measures under Climate Smart Forestry.

     

High-resolution satellite image segmentation using Hölder exponents

Texture in high-resolution satellite images requires substantial amendment in the conventional segmentation algorithms. A measure is proposed to compute the Hölder exponent (HE) to assess the roughness or smoothness around each pixel of the image. The localized singularity information is incorporated in computing the HE. An optimum window size is evaluated so that HE reacts to localized singularity. A two-step iterative procedure for clustering the transformed HE image is adapted to identify the range of HE, densely occupied in the kernel and to partition Hölder exponents into a cluster that matches with the range. Hölder exponent values (noise or not associated with the other cluster) are clubbed to a nearest possible cluster using the local maximum likelihood analysis.     

Automated mapping of rock slope geometry,kinematics and stability with RSS-GIS

A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For such computations, different approaches for the analysis and regionalization of available structural directional information applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different test sites in Germany.     

Singular value decomposition and cluster analysis as regression diagnostics tools for geodetic applications

It is well known that high-leverage observations significantly affect the estimation of parameters. In geodetic literature, mainly redundancy numbers are used for the detection of single high-leverage observations or of single redundant observations. In this paper a further objective method for the detection of groups of important and less important (and thus redundant) observations is developed. In addition, the parameters which are predominantly affected by these groups of observations are identified. This method thus complements other diagnostics tools, such as, e.g., multiple row diagnostics methods as described in statistical literature (see, e.g., Belsley et al. in Regression diagnostics: identifying influential data and sources of collinearity. Wiley, New York, 1980). The method proposed in this paper is based on geometric aspects of adjustment theory and uses the singular value decomposition of the design matrix of an adjustment problem together with cluster analysis methods for regression diagnostics. It can be applied to any geodetic adjustment problem and can be used for the detection of (groups of) observations that significantly affect the estimated parameters or that are of negligible impact. One of the advantages of the proposed method is the improvement of the reliability of observation plans and thus the reduction of the impact of individual observations (and outliers) on the estimated parameters. This is of particular importance for the very long baseline interferometry technique which serves as an application example of the regression diagnostics tool.     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.