Recolonization and recovery dynamics of the macrozoobenthos after sand extraction in relict sand bottoms of the Northern Adriatic Sea

The long-term effects of sand extraction on macrozoobenthic communities were investigated in an offshore area in the Northern Adriatic Sea characterised by relict sands formed during the last Adriatic post-glacial transgression. Surveys were carried out before, during and 1, 6, 12, 18, 24 and 30 months after extraction at three impacted and seven reference stations. The operations did not influence the physical characteristics of the sediment, but they caused almost complete defaunation at dredged sites. Univariate and multivariate analyses highlighted that the macrozoobenthic community responses to the dredging operations were (1) a rapid initial recolonisation phase by the dominant taxa present before dredging, which took place 6-12 months after sand extraction; (2) a slower recovery phase, that ended 30 months after the operations, when the composition and structure of the communities were similar in the dredged and reference areas. This pattern of recolonisation-recovery fits well with the commonly encountered scenario where the substratum merely remains unchanged after marine aggregate extraction.     

Coordination of boron in nominally boron-free rock forming silicates: Evidence for incorporation of BO3 groups in clinopyroxene

To explore mechanisms of B-incorporation in common chain silicates we have investigated synthetic diopside samples produced under boron-saturated conditions by ¹¹B and ²⁹Si magic-angle spinning (MAS) NMR and single-crystal NRA, FTIR, EMP and XRD/SREF techniques. Our samples contain 0.14-0.65 wt.% B₂O₃. NMR reveals that B is predominantly present in trigonal coordination in the clinopyroxene structure. This observation is supported by vibrational bands characteristic for B-O stretching in BO₃ groups in the range 1250-1400 cm⁻¹ in polarised single crystal FTIR-spectra. Single crystal structure refinements suggest that boron replaces Si at the T site. Combined, these results suggest that boron replacement for Si at the T-site leads to disruption of one of the T-O bonds of the nominal clinopyroxene structure resulting in replacement of SiO₄ tetrahedra by BO₃ groups. Our results show that high concentrations of boron can be incorporated in the nominally boron-free diopside. Elevated B-concentrations in the present calcic clinopyroxenes are accompanied by modifications of the diopside crystal structure involving the breaking of one T-O bond and simultaneous formation of vacancies at the octahedral M2 site. These structural modifications destabilize the structure and constitute thereby limiting factors for incorporating higher boron concentrations in diopside.     

Weathering of Valle Ricca stiff and jointed clay

The study proposes a weathering model of Pliocene–Pleistocene stiff and jointed blue-grey clay transforming into yellow clay. Physical, mineralogical, chemical and textural changes, as well as the weathering profile were investigated in a quarry of central Italy. Based on geological records and inferences, these changes are likely to have occurred within a time-span of about 50,000 years BP, upon overburden stress unloading and in a stress regime that is locally controlled by suction. Weathering propagated into the clay at a rate of about 0.3 mm/year and was enhanced by the enlargement of the pre-existing tectonic discontinuities and by the formation of new joints. A mass loss of about 22–25 wt.% was calculated. Considering Fe and P as immobile elements, the individual oxides contribute to mass loss in the following order: SiO₂ > CaO = CO₂ > Al₂O₃ > MgO > K₂O > S > Na₂O > TiO₂ > MnO. The Fe₂O₃ / (Fe₂O₃ + FeO) ratio varies from 9–29% in the blue-grey clay to 75–82% in the yellow one. Oxidation and/or dissolution of 7 Å-Fe²⁺-bearing clay minerals, mica-like minerals and calcite and parallel increase of smectite and Fe-hydroxides play a critical role in the chemical changes and explain the higher plasticity of the yellow clay with respect to the blue-grey one. The role of water during the weathering process was inferred to occur in cyclical steps: 1) seepage of meteoric water; 2) dissemination of highly oxidizing meteoric water; 3) triggering of oxidation and dissolution of minerals; 4) water evaporation; 5) partial migration of the elements contained in the aqueous solution and consequent deposition of minerals in the joints.     

The Influence of Aircraft Speed Variations on Sensible Heat-Flux Measurements by Different Airborne Systems

Crawford et al. (Boundary-Layer Meteorol 66:237–245, 1993) showed that the time average is inappropriate for airborne eddy-covariance flux calculations. The aircraft’s ground speed through a turbulent field is not constant. One reason can be a correlation with vertical air motion, so that some types of structures are sampled more densely than others. To avoid this, the time-sampled data are adjusted for the varying ground speed so that the modified estimates are equivalent to spatially-sampled data. A comparison of sensible heat-flux calculations using temporal and spatial averaging methods is presented and discussed. Data of the airborne measurement systems $\hbox {M}^2\hbox {AV}$ , Helipod and Dornier 128-6 are used for the analysis. These systems vary in size, weight and aerodynamic characteristics, since the $\hbox {M}^2\hbox {AV}$ is a small unmanned aerial vehicle (UAV), the Helipod a helicopter-borne turbulence probe and the Dornier 128-6 a manned research aircraft. The systematic bias anticipated in covariance computations due to speed variations was neither found when averaging over Dornier, Helipod nor UAV flight legs. However, the random differences between spatial and temporal averaging fluxes were found to be up to 30 % on the individual flight legs.     

Rapid spread of the wasp spider Argiope bruennichi across Europe: a consequence of climate change?

Numerous species are expanding their ranges towards the North Pole, a pattern that is usually explained with climate change. However, few studies have actually tested the potential role of climate in such range expansions. Here, we studied the wasp spider Argiope bruennichi, which has multiplied its range in Central and Northern Europe during the 20th century and is still spreading. Using current and historical climate data, we analysed whether this spread can be explained by climate warming, increasing cold tolerance or if it is unrelated to temperature. Spatial partial regression showed that the spread of A. bruennichi into formerly cooler areas is independent of spatial autocorrelation, indicating that it is driven by temperature. Some aspects of the spread, as e.g. the patchy distribution at the beginning of the century are likely to be relicts of climate fluctuations before our study period. From the middle of the 20th century until the 1980s, A. bruennichi was recorded from gradually cooler climates, while temperature was relatively constant. This indicates that A. bruennichi either increased its cold tolerance or that the spread continued with a time lag following an earlier warming event, due to dispersal limitation. In the last two decades, temperature rose sharply. The temperatures at which A. bruennichi was newly recorded increased as well, indicating that the spider is dispersal limited and that the spread will continue even in the absence of further climate warming.     

Vertical-axis rotations and deformation along the active strike-slip El Tigre Fault (Precordillera of San Juan,Argentina) assessed through palaeomagnetism and anisotropy of magnetic susceptibility

International Journal of Earth Sciences - Palaeomagnetic data from poorly consolidated to non-consolidated late Cenozoic sediments along the central segment of the active El Tigre Fault...     

Anhysteretic remanent magnetization: model of grain size distribution of spherical magnetite grains

A phenomenological model based on a linear relationship between the magnetic coercivity field and the reciprocal of the grain diameter is applied to explain the anhysteretic remanent magnetization (ARM) imparted to artificial samples with different concentrations of a very well characterized magnetite powder. By analyses of scanning electron microscopy images, the spherically shaped single domain synthetic magnetite is found to follow a lognormal grain size distribution with ~86 nm of mean diameter. The proposed model, fitted to ARM measurements up to a peak alternating field of 100 mT, yields a very good agreement. The coercivity behaviour predicted by micromagnetism theory disagrees with the experimental results of this work. A likely explanation for the discrepancy is that the magnetite particles, which consist of a mixture of grains in coherent rotation and curling modes, produce similar observations as domain processes.     

Reconstruction of the Sunspot Number Source Database and the 1947 Zurich Discontinuity

Solar Physics - The final version (V.19) of the total solar irradiance data from the SOlar Radiation and Climate Experiment (SORCE) Total Irradiance Monitor has been released. This version includes...