The aperiodic broad-band X-ray variability of Cygnus X-3

We study the soft X-ray variability of Cygnus X-3. By combining data from the All-Sky Monitor and Proportional Counter Array instruments on the RXTE satellite with EXOSAT /Medium Energy (ME) detector observations, we are able to analyse the power density spectrum (PDS) of the source from 10⁻⁹ to 0.1 Hz, thus covering time-scales from seconds to years. As the data on the longer time-scales are unevenly sampled, we combine traditional power spectral techniques with simulations to analyse the variability in this range. The PDS at higher frequencies  (≳10⁻³ Hz)  are for the first time compared for all states of this source. We find that it is for all states well described by a power law, with index  ∼−2  in the soft states and a tendency for a less steep power law in the hard state. At longer time-scales, we study the effect of the state transitions on the PDS, and find that the variability below  ∼10⁻⁷ Hz  is dominated by the transitions. Furthermore, we find no correlation between the length of a high/soft-state episode and the time since the previous high/soft state. On intermediate time-scales, we find evidence for a break in the PDS at time-scales of the order of the orbital period. This may be interpreted as evidence for the existence of a tidal resonance in the accretion disc around the compact object, and constraining the mass ratio to   M ₂/ M ₁≲ 0.3  .     

A multiphysics and multiscale software environment for modeling astrophysical systems

We present MUSE, a software framework for combining existing computational tools for different astrophysical domains into a single multiphysics, multiscale application. MUSE facilitates the coupling of existing codes written in different languages by providing inter-language tools and by specifying an interface between each module and the framework that represents a balance between generality and computational efficiency. This approach allows scientists to use combinations of codes to solve highly coupled problems without the need to write new codes for other domains or significantly alter their existing codes. MUSE currently incorporates the domains of stellar dynamics, stellar evolution and stellar hydrodynamics for studying generalized stellar systems. We have now reached a “Noah’s Ark” milestone, with (at least) two available numerical solvers for each domain. MUSE can treat multiscale and multiphysics systems in which the time- and size-scales are well separated, like simulating the evolution of planetary systems, small stellar associations, dense stellar clusters, galaxies and galactic nuclei. In this paper we describe three examples calculated using MUSE: the merger of two galaxies, the merger of two evolving stars, and a hybrid N-body simulation. In addition, we demonstrate an implementation of MUSE on a distributed computer which may also include special-purpose hardware, such as GRAPEs or GPUs, to accelerate computations. The current MUSE code base is publicly available as open source at http://muse.li.     

Optimal Compensation and Implementation for Adaptive Optics Systems

This paper develops a compensation algorithm based on Linear–Quadratic–Gaussian (LQG) control system design whose parameters are determined (in part) by a model of the atmosphere. The model for the atmosphere is based on the open-loop statistics of the atmosphere as observed by the wavefront sensor, and is identified from these using an auto-regressive, moving average (ARMA) model. The (LQG) control design is compared with an existing compensation algorithm for a simulation developed at ESO that represents the operation of MACAO adaptive optics system on the 8.2 m telescopes at Paranal, Chile. This revised version was published online in July 2006 with corrections to the Cover Date.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

Simulated Climate Change Effects on Year-Round Water Temperatures in Temperate Zone Lakes

A deterministic, one-dimensional model is presented to simulate daily water temperature profiles and associated ice and snow covers for dimictic and polymictic lakes of the temperate zone. The lake parameters required as model input are surface area (A_s), maximum depth (H_MAX), and Secchi depth (z_s), the latter, used as a measure of light attenuation and trophic state. The model is driven by daily weather data and operates year-round over multiple years. The model has been tested with extensive data (over 5,000 temperature points). Standard error between simulated and measured water temperatures is 1.4°C in the open water season and 0.5°C in the ice cover season. The model is applied to simulate the sensitivity of Minnesota lake water temperature characteristics to climate change. The projected climate changes due to a doubling of atmospheric CO₂ are obtained from the output of the Canadian Climate Center General Circulation Model (CCC GCM) and the Goddard Institute of Space Studies General Circulation Model (GISS GCM). Simulated lake temperature characteristics have been plotted in a coordinate system with a lake geometry ratio (A _s ^0.25 /H_MAX) on one axis and Secchi depth on the other. The lake geometry ratio expresses a lake's susceptibility to stratification. By interpolation, the sensitivity of lake temperature characteristics to changes of water depth and Secchi depth under the projected climate scenarios can therefore be obtained. Selected lake temperature characteristics simulated with past climate conditions (1961–1979) and with a projected 2 × CO₂ climate scenario as input are presented herein in graphical form. The simulation results show that under the 2 × CO₂ climate scenario ice formation is delayed and ice cover period is shortened. These changes cause water temperature modifications throughout the year.     

Assessment of agri-spillways as a soil erosion protection measure in Mediterranean sloping vineyards

Suitable vineyard soils enhance soil stability and biodiversity which in turn protects roots against erosion and nutrient losses. There is a lack of information related to inexpensive and suitable methods and tools to protect the soil in Mediterranean sloping vineyards(25° of slope inclination). In the vineyards of the Montes de Málaga(southern Spain), a sustainable land management practice that controls soil erosion is actually achieved by tilling rills in the down-slope direction to canalize water and sediments. Because of their design and use, we call them agri-spillways. In this research, we assessed two agri-spillways(between 10 m and 15 m length, and slopes between 25.8° and 35°) by performing runoff experiments under extreme conditions(a motor driven pump that discharged water flows up to 1.33 l s~(-1) for 12 to 15 minutes: ≈1000 l). The final results showed: i) a great capacity by these rills to canalize large amounts of water and sediments; and, ii) higher water flow speeds(between 0.16 m s-1 and 0.28 m s~(-1)) and sediment concentrationrates(up to 1538.6 g l~(-1)) than typically found in other Mediterranean areas and land uses(such as badlands, rangelands or extensive crops of olives and almonds). The speed of water flow and the sediment concentration were much higher in the shorter and steeper rill. We concluded that agri-spillways, given correct planning and maintenance, can be a potential solution as an inexpensive method to protect the soil in sloping Mediterranean vineyards.     

Thermophysical properties of Almahata Sitta meteorites (asteroid 2008 TC3) for high‐fidelity entry modeling

Asteroid 2008 TC₃ was characterized in a unique manner prior to impacting Earth's atmosphere, making its October 7, 2008, impact a suitable field test for or validating the application of high‐fidelity re‐entry modeling to asteroid entry. The accurate modeling of the behavior of 2008 TC₃ during its entry in Earth's atmosphere requires detailed information about the thermophysical properties of the asteroid's meteoritic materials at temperatures ranging from room temperature up to the point of ablation (T ~ 1400 K). Here, we present measurements of the thermophysical properties up to these temperatures (in a 1 atm. pressure of argon) for two samples of the Almahata Sitta meteorites from asteroid 2008 TC₃: a thick flat‐faced ureilite suitably shaped for emissivity measurements and a thin flat‐faced EL6 enstatite chondrite suitable for diffusivity measurements. Heat capacity was determined from the elemental composition and density from a 3‐D laser scan of the sample. We find that the thermal conductivity of the enstatite chondrite material decreases more gradually as a function of temperature than expected, while the emissivity of the ureilitic material decreases at a rate of 9.5 × 10^?5 K^?1 above 770 K. The entry scenario is the result of the actual flight path being the boundary to the load the meteorite will be affected with when entering. An accurate heat load prediction depends on the thermophysical properties. Finally, based on these data, the breakup can be calculated accurately leading to a risk assessment for ground damage.     

The lunar geochemistry of chromium and vanadium

Crystal/liquid partition coefficients for Cr, V, Mn, and Fe have been determined experimentally between olivine, orthopyroxene, clinopyroxene and silicate melt possesing the composition of a primitive lunar green glass, at oxygen fugacities appropriate to the lunar interior. These species all behave essentially as compatible elements and possess crystal/liquid partition coefficients mostly between 0.3 and 0.9. Partition coefficients for Cr, V, and Mn are generally similar to those of Fe. This implies that crystal/liquid fractionation processes in the lunar interior which do not involve the participation of spinels would not have been effective in fractionating MnO, CrO, and VO from FeO. The well-known constancy of FeO/MnO ratios in nearly all lunar rocks is a reflection of this behaviour. It is shown that comparably strong correlations between CrO-;FeO and VO-;FeO exist for lunar highland breccias and soils from all sites and that these correlations extend to primitive lunar volcanic glasses associated with mare volcanism, strongly suggesting that the CrO/FeO and VO/FeO ratios so derived are of global importance. The observed ratios characterizing differentiated regions of the Moon can be combined with the corresponding ratios for residual refractory portions of the Moon, using measured partition coefficients for Fe, Mg, Cr, V, and Mn between olivine, orthopyroxene and liquid. Bulk Moon abundances for Cr and V have been calculated for a range of reasonable assumptions concerning the petrogenetic relationships between differentiated portions of the Moon and complementary refractory residua consisting of olivine and orthopyroxene mineralogies. Because of the small differences in crystal liquid partition coefficients between FeO, CrO, and VO, these estimates are insensitive to large variations in the models. The bulk Moon is accordingly estimated to contain 2190–2463 ppm Cr and 79–95 ppm V. These values are very similar to the Cr and V contents of the Earth's mantle, estimated as 3010 ppm Cr and 81 ppm V by Sun (1982). The geochemical implications of these similarities are discussed.     

Stable Cu and Zn isotope ratios as tracers of sources and transport of Cu and Zn in contaminated soil

Copper and Zn metals are produced in large quantities for different applications. During Cu production, large amounts of Cu and Zn can be released to the environment. Therefore, the surroundings of Cu smelters are frequently metal-polluted. We determined Cu and Zn concentrations and Cu and Zn stable isotope ratios (δ⁶⁵Cu, δ⁶⁶Zn) in three soils at distances of 1.1, 3.8, and 5.3 km from a Slovak Cu smelter and in smelter wastes (slag, sludge, ash) to trace sources and transport of Cu and Zn in soils. Stable isotope ratios were measured by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) in total digests. Soils were heavily contaminated with concentrations up to 8087 μg g⁻¹ Cu and 2084 μg g⁻¹ Zn in the organic horizons. The δ⁶⁵Cu values varied little (−0.12‰ to 0.36‰) in soils and most wastes and therefore no source identification was possible. In soils, Cu became isotopically lighter with increasing depth down to 0.4 m, likely because of equilibrium reactions between dissolved and adsorbed Cu species during transport of smelter-derived Cu through the soil. The δ⁶⁶Zn_IRMM values were isotopically lighter in ash (−0.41‰) and organic horizons (−0.85‰ to −0.47‰) than in bedrock (−0.28‰) and slag (0.18‰) likely mainly because of kinetic fractionation during evaporation and thus allowed for separation of smelter-Zn from native Zn in soil. In particular in the organic horizons large variations in δ⁶⁶Zn values occur, probably caused by biogeochemical fractionation in the soil-plant system. In the mineral horizons, Zn isotopes showed only minor shifts to heavier δ⁶⁶Zn values with depth mainly because of the mixing of smelter-derived Zn and native Zn in the soils. In contrast to Cu, Zn isotope fractionation between dissolved and adsorbed species was probably only a minor driver in producing the observed variations in δ⁶⁶Zn values. Our results demonstrate that metal stable isotope ratios may serve as tracer of sources, vertical dislocation, and biogeochemical behavior in contaminated soil.