福建福安下白石特大桥海上岩土勘察方法

下白石特大桥是同江至三亚国道主干线福鼎至宁德高速公路建设中的一项控制性工程 ,是交通部指定的三阶段设计工程 ,桥长 110 5 m,主跨采用 2× 2 6 0 m预应力混凝土连续钢构。桥位位于白马河入海口处 ,工程地质、水文地质条件复杂 ,通过采用地表大面积的综合地质调查、海上地震映像物探以及海上钻探、原位测试、岩土测试等一系列行之有效的岩土勘察方法 ,确保了岩土工程勘察质量 ,其结果切实可行 ,为后期施工单位提供科学依据。     

利用ERS-2 SAR图像纹理分析方法揭示长白山天池火山近代喷发物空间分布特征

简单介绍了SAR图像的纹理特征以及正交小波变换纹理提取方法。论述了SAR图像的纹理特征参与分类的重要性。以长白山天池火山为例,通过对ERS2SAR图像进行纹理分析,提取了SAR图像两个层次的尺度变化、时频局部化和方向性纹理特征。并将SAR纹理特征与TM图像及DEM进行复合,利用多源信息各自的优势,进行了BP神经元网络分类,从较大范围对长白山天池火山735±15aB.P.大喷发的喷发物空间分布进行评价。获取了长白山天池火山近代喷发物的空间分布及规模。这对长白山天池火山未来喷发危险性初步评价、火山地质制图及火山灾害预测有重要意义。     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。     

低温电镀孕镶金刚石石油取心钻头研制与应用

该钻头用于坚硬地层取心。河南油田以往常用园柱聚晶、三角聚晶钻头以及烧结孕镶金刚石钻头，取心效率低、钻速慢、成本高。近两年采用低温电镀孕镶金刚石钻头取心后，平均单筒进尺由原来的4．20m／筒提高到7．62m/筒，平均取心机械钻速由原来的0．21m/h提高到的0.84m/h。该钻头生产工艺完全改变原来高温（1000℃以上）烧结为低温（室温）电镀工艺，极大地避免了金刚石热损伤，采用高强度大颗粒的金刚石，提高了取心机械钻速。     

运用层序不对称性分析海平面变化特征

目前研究海平面变化的方法尚不能精确确定海平面变化，对记录海平面变化的沉积体或层序物质组成及结构特点的研究尚显薄弱。在分析层序不对称性与海平面变化的关系基础，提出层序不对称系数S0，认为海平面的升降变化对浅水沉积区影响显著，其结果必然造成层序S0的增加；海平面的升降变化对沉水沉积区影响不大，层序S0较为恒定。对进行详细研究中扬子区S0分布特点，运用S0曲线计算了中扬子区海平面变化特点，并与其他方法进行对比，认为可以用S0判断水体相对深浅，分析海平面变化。     

相对湿度对静电收集型连续测氡仪检定结果的影响

NR－667A（Ⅲ）型快速连续测氧仪是目前环境氡测量时间响应最短的一种仪器。该仪器在核工业第六研究所标准氡室进行检定时发现，环境相对相对度对仪器检定结果有很大影响。在相对湿度为80％－99％的标准氡室内分别对仪器进行检定，结果在相对湿度为80％时仪器检定合格，而在相对湿度为99％时仪器检定不合格。本从仪器工作原理对检定结果进行。并提出有效的解决方法，当相对湿度太大时，可在仪器进气口安装干燥器对进气进行除湿。     

A multi-scale study on land use and land cover quality change: The case of the Yellow River Delta in China

This paper presents a case study of the Yellow River Delta in China, to trace land use and land cover changes during the past 20 years, with an emphasis on land quality changes. Three sets of data are used in this case study: remote sensing data derived from satellite images; crop yield data from statistics; and soil data collected by the researchers in the field. Our study reveals that at the regional scale, LUCC has taken place in a positive direction: vegetation cover has been expanding and crop yields per hectare have been on rise. However, while the overall eco-environment has improved, the improvement is uneven across the Delta region. At local levels, some areas show signs of increased salinization and declining organic content. Both natural forces and human activities are responsible for the LUCC, but human activities play a more important role. While some impacts of human activities are positive, the damages are often long-lasting and irreversible. We also conclude that it is necessary to use both macro data (such as remote sensing data) and micro data (data collected in the field) to study land quality change. The former are efficient in examining land quality changes at the regional scale, the latter can serve to verify ground patterns revealed from macro data and help to identify local variations, so as to get a comprehensive understanding of LUCC and promote sustainable land use and land management. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ordovician Graptolite Rhabdosome Complication and Its Implications on Sea Level Changes

A total of four times of rhabdosome complication events, i.e., the lateral branching of graptolite stipes during the Late Middle Ordovician, the secondary branching of graptolite stipes at the earliest Upper Ordovician, the early Qiantangjiangian of Upper Ordovician and the middle Qiantangjiangian, respectively, is discussed in this paper. These events and other adaptation events demonstrate close relationships between a diverse graptolite fauna and sea level changes, and consequently can be employed to study sea level fluctuations. It is safe to conclude that the complication of rhabdosome started at the maximum flooding surface (MFS) and terminated at the beginning of regression.     

Division of Gas Accumulation System and Laws Controlling Distribution of Natural Gas in Typical Petroliferous Basins of China

Considering the existing problems of the petroleum system, this paper brings forward the concept of natural gas accumulation system and presents the dividing principles. Then detailed statistics on the accumulation factors of the 32 typical natural gas accumulation systems in China and studies on the laws controlling distribution of gas are collected. The research shows that the petroleum accumulation system is the basic unit controlling petroleum generation, migration and accumulation. Generating intensity, generating amount, accumulating efficiency and migration distance plays an important role in the distribution of natural gas. Through analysis on results of resources evaluation, discovered reserves and residual reserves, potential areas in middle-scaled petroliferous basins in China are forecasted in this paper. Ordos, Sichuan, Tarim and Qaidam basins are found out to be the main basins developing and enriching gas accumulation systems.     

Carbonate platform evolution: from a bioconstructed platform margin to a sand-shoal system (Devonian, Guilin, South China)

ABSTRACT The depositional organization and architecture of the middle–late Devonian Yangdi rimmed carbonate platform margin in the Guilin area of South China were related to oblique, extensional faulting in a strike‐slip setting. The platform margin shows two main stages of construction in the late Givetian to Frasnian, with a bioconstructed margin evolving into a sand‐shoal system. In the late Givetian, the platform margin was rimmed with microbial buildups composed mainly of cyanobacterial colonies (mostly Renalcis and Epiphyton). These grew upwards and produced an aggradational (locally slightly retrogradational) architecture with steep foreslope clinoforms. Three depositional sequences (S3–S5) are recognized in the upper Givetian strata, which are dominated by extensive microbialites. Metre‐scale depositional cyclicity occurs in most facies associations, except in the platform‐margin buildups and upper foreslope facies. In the latest Givetian (at the top of sequence S5), relative platform uplift (± subaerial exposure) and associated rapid basin subsidence (probably a block‐tilting effect) caused large‐scale platform collapse and slope erosion to give local scalloped embayments along the platform margin and the synchronous demise of microbial buildups. Subsequently, sand shoals and banks composed of ooids and peloids and, a little later, stromatoporoid buildups on the palaeohighs, developed along the platform margin, from which abundant loose sediment was transported downslope to form gravity‐flow deposits. Another strong tectonic episode caused further platform collapse in the early Frasnian (at the top of sequence S6), leading to large‐scale breccia release and the death of the stromatoporoid buildups. Siliceous facies (banded cherts and siliceous shales) were then deposited extensively in the basin centre as a result of the influx of hydrothermal fluids. The platform‐margin sand‐shoal/bank system, possibly with gullies on the slope, persisted into the latest Frasnian until the restoration of microbial buildups. Four sequences (S6–S9), characterized by abundant sand‐shoal deposits on the margin and gravity‐flow and hemipelagic deposits on the slope, are distinguished in the Frasnian strata. Smaller‐scale depositional cyclicity is evident in all facies associations across the platform–slope–basin transect. The distinctive depositional architecture and evolution of this Yangdi Platform are interpreted as having been controlled mainly by regional tectonics with contributions from eustasy, environmental factors, oceanographic setting, biotic and sedimentary fabrics.