网络地图问题及其解决方案

网络地图或网上地图是指在因特网上浏览、制作和使用的地图,越来越多的人从网络上获取地图和相关信息,但是,它在方便大众的同时也存在很多问题,文章分析和总结了当前网络地图的主要特点和存在的问题,并在此基础上,讨论网络地图相关问题的解决方案以及可以采取的措施。     

河北省张家口金矿集区同位素及包裹体地质特征

张家口地区是我国重要的金矿集中区之一.自上世纪80年代以来,在崇礼县-赤城县毗邻地段的大型偏碱性二长岩杂岩体及其太古界中深变质岩系中,相继发现金矿田三个,探明金矿储量近100t.通过对该金矿集中区各类型矿床的大量同位素以及包裹体地质特征的研究,对该区金矿的成矿物质来源、矿床成因进行了探讨,这对于该区今后的金矿找矿工作具有实质性的指导意义.     

现行有关规范用于黄土地区的局限性分析

探讨了现行有关规范用于黄土地区存在的某些不足,阐明了场地条件和场地类别等因素对抗震设防参数的影响问题,强调了重视地方标准的制定的必要性。同时也展望了今后尚需开展的研究工作。     

住宅侧墙绿化的降温增湿效应研究

对住宅小区的侧墙绿化墙面与裸露墙面温湿度的对比分析发现,侧墙绿化可以有效地改善墙体的温湿度状况;同时通过观测爬墙虎的蒸腾速率,推算出其对环境的降温增湿效果;并通过有侧墙绿化与无侧墙绿化室内温湿度分析比较,说明侧墙绿化对室内温湿度的影响。     

青海高原地区近250 a来年平均气温变化及突变分析

用多条树轮重建的青海高原近250 a平均气温序列,利用线性趋势、小波变换分析和突变检测等方法对近250 a青海高原年平均气温的年际变化及突变特征进行了综合分析,结果表明:250多a来青海高原年平均气温波动明显,30 a滑动平均表现出1779～1811年和1934～2006年年平均气温偏高,其中年平均气温最高出现在1998年为1.3℃,1741～1778年和1812～1933年年平均气温偏低,其中年平均气温最低出现在1823年为-1.5℃,年气温总体呈上升趋势;在20 a以上相对大尺度上,年平均气温冷、暖交替的特征明显,经历了7个冷、暖交替阶段,在2～3 a,28 a左右,48 a和110 a时间尺度上的周期变化都比较明显。     

论旅游业和交通业的互动与整合

交通是决定旅游业发展是否具有竞争力的基本要素，而旅游业对交通的贡献率高，二者的互动作用非常明显，其互动作用表现在：旅游业拉动了交通业的发展，交通的改善为旅游业的发展提供了基础，二者相互促进，良性发展。通过理论阐述旅游业和交通业的互动关系，提出了旅游业和交通业的整合途径。     

NEAR-FAULT DISPLACEMENT AND DEFORMATION OBTAINED FROM ONE-KILOMETER-LONG FAULT-CROSSING BASELINE MEASUREMENTS-A PRELIMINARY EXPERIMENT AT 2 SITES ON THE EASTERN BOUNDARY OF THE SICHUAN-YUNNAN BLOCK

The current and conventional fault-crossing short baseline measurement has a relatively high precision, but its measurement arrays usually fail to or cannot completely span major active fault zones due to the short length of the baselines, which are only tens to 100 meters. GNSS measurement has relatively low resolution on near-fault deformation and hence is not suitable for monitoring those faults with low motion and deformation rates, due to sparse stations and relatively low accuracy of the GNSS observation. We recently built up two experimental sites on the eastern boundary of the active Sichuan-Yunnan block, one crossing the Daqing section of the Zemuhe Fault and the other crossing the Longshu section of the Zhaotong Fault, aiming to test the measurement of near-fault motion and deformation by using fault-crossing arrays of one-kilometer-long baselines. In this paper, from a three-year-long data set we firstly introduce the selection of the sites and the methods of the measurement. We then calculate and analyze the near-field displacement and strain of the two sites by using three hypothetical models, the rigid body, elastic and composed models, proposed by previous researchers. In the rigid body model, we assume that an observed fault is located between two rigid blocks and the observed variances in baseline lengths result from the relative motion of the blocks. In the elastic model, we assume that a fault deforms uniformly within the fault zone over which a baseline array spans, and in the array baselines in different directions may play roles as strainmeters whose observations allow us to calculate three components of near-fault horizontal strain. In the composed model, we assume that both displacement and strain are accumulated within the fault zone that a baseline array spans, and both contribute to the observed variances in baseline lengths. Our results show that, from the rigid body model, variations in horizontal fault-parallel displacement component of the Zemuhe Fault at the Daqing site fluctuate within 3mm without obvious tendencies. The displacement variation in the fault-normal component keeps dropping in 2015 and 2016 with a cumulative decrease of 6mm, reflecting transverse horizontal compression, and it turns to rise slightly(suggesting extension)in 2017. From the elastic model, the variation in horizontal fault-normal strain component of the fault at Daqing shows mainly compression, with an annual variation close to 10^-5, and variations in the other two strain components are at the order of 10^-6. For the Longshu Fault, the rigid-body displacement of the fault varies totally within a few millimeters, but shows a dextral strike-slip tendency that is consistent with the fault motion known from geological investigation, and the observed dextral-slip rate is about 0.7mm/a on average. The fault-parallel strain component of the Longshu Fault is compressional within 2×10^-6, and the fault-normal strain component is mainly extensional. Restricted by the assumption of rigid-body model, we have to ignore homolateral deformation on either side of an observed fault and attribute such deformation to the fault displacement, resulting in an upper limit estimate of the fault displacement. The elastic model emphasizes more the deformation on an observed fault zone and may give us information about localizations of near-fault strain. The results of the two sites from the composed model suggest that it needs caution when using this model due to that big uncertainty would be introduced in solving relevant equations. Level surveying has also been carried out at the meantime at the two sites. The leveling series of the Daqing site fluctuates within 4mm and shows no tendency, meaning little vertical component of fault motion has been observed at this site; while, from the rigid-body model, the fault-normal motion shows transverse-horizontal compression of up to 6mm, indicating that the motion of the Zemuhe Fault at Daqing is dominantly horizontal. The leveling series of the Longshu site shows a variation with amplitude comparable with that observed from the baseline series here, suggesting a minor component of thrust faulting; while the baseline series of the same site do not present tendencies of fault-normal displacement. Since the steep-dip faults at the two sites are dominantly strike-slip in geological time scale, we ignore probable vertical movement temporarily. In addition, lengths of homolateral baselines on either side of the faults change somewhat over time, and this makes us consider the existence of minor faults on either side of the main faults. These probable minor faults may not reach to the surface and have not been identified through geological mapping; they might result in the observed variances in lengths of homolateral baselines, fortunately such variations are small relative to those in fault-crossing baselines. In summary, the fault-crossing measurement using arrays with one-kilometer-long baselines provides us information about near-fault movement and strain, and has a slightly higher resolution relative to current GNSS observation at similar time and space scales, and therefore this geodetic technology will be used until GNSS networks with dense near-fault stations are available in the future.     

激光雷达点云树木建模研究进展与展望

三维树木几何模型是数字城市与数字林业工程的重要组成部分.针对点云树木建模,深入分析了基于广义(泛在)激光雷达点云的树木模型重建方法,提出了聚类思想建模、图论方法建模、先验假设建模、拉普拉斯算子建模与轻量化表达建模5类建模体系,归纳总结了不同建模体系在树冠枝干的细节表达、建模算法性能、树木模型的多层次细节表达、建模体系综...     

PHREEQC在研究地浸溶质迁移过程中的应用

应用地球化学模式PHREEQC，揭示地浸过程中溶质迁移的存在形式及各种形式之间的转化关系。通过计算饱和指数，确定溶质水解沉淀的水文地球化学条件临界值。     

Model Test Study of Dynamic Ice Force on Compliant Conical Structures

To study ice-induced vibration of a compliant conical structure,a series of model tests were performed from 2004 to 2005.In the tests,the ice sheet before the compliant conical structure was found to fail in two-time breaking.From 2005 to 2006,this type of ice failure was studied through more groups of tests.The tests show that two-time breaking is the typical failure of ice before steep conical structures,and is controlled by other factors at the same time,such as ice speed and the angle of the cone.