Synergistic Application of Optical and Radar Data for Archaeological Exploration in the Talakadu Region,Karnataka

Talakadu is a well known historic place situated on bank of the river Cauvery in Mysore district of Karnataka. The place is close to concave side of a prominent meander where large amount of sand has accumulated. It is believed that after construction of a reservoir upstream, sand was exposed to wind action burying the structures of Ganga dynasty and other later kingdoms. A number of buried sites have been identified by archaeological excavations conducted so far. Presently the area forms sand dunes with thick plantation cover. Analysis of RADAR data (fine beam RADARSAT and ENVISAT ASAR) led to identifying a hitherto unknown buried channel through the Old Talakadu town adjoining the excavated archaeological sites. The study suggests that RADAR penetration through the plantation canopy seems to have occurred as observed by comparing with corresponding optical data of LISS-IV. Below the canopy, sand and shrubs on top of the channel (topographically low area) are acting as smooth surface providing dark tone on radar imagery. During field validation GPS was extensively used to navigate through the forest canopy and locate the buried channel, excavated archaeological sites as well as other anomalous patterns. Synergistic application of optical (RESOURCESAT-1 LISS-IV and CARTOSAT-1 & 2) and radar (fine beam RADARSAT and ENVISAT ASAR) data led to identifying remote sensing based guides for archaeological exploration. Integration of known archaeological sites with the identified anomalous patterns was done in GIS environment. This study adds on to the knowledge base of the site and compliments already known information and suggested new areas for further archaeological exploration.     

Spatio-Temporal Coherence Based Technique for Near-Real Time Sea-Ice Identification from Scatterometer Data

The identification of sea-ice has frequently been cited as one of the most important tasks for deriving the sea-ice parameters and to avoid erroneous retrieval of wind vector over sea-ice infested oceans using space-borne scatterometer data. Discrimination between sea-ice and ocean is ambiguous under the high wind and/or thin/scattered ice conditions. The pre-launch technique developed for Oceansat-2, utilizes the dual-polarized QuikSCAT scatterometer data by using the spatio-temporal coherence properties of sea ice in addition to backscatter coefficient and the Active Polarization Ratio. Results were compared with the operational sea-ice products from National Snow and Ice Data Center. The threshold API value of −0.025 was found optimum for sea-ice and ocean discrimination. The overall sea-ice identification accuracy achieved was of the order of 95 per cent, ranging from 92.5% (during December in Southern Hemisphere) to 98% (during March in Northern Hemisphere). The applicability of the algorithm for both the Arctic as well as Antarctic makes it suitable for its operational use with the Oceansat-2 scatterometer data.     

A Spatial Database of Cropping System and its Characteristics to Aid Climate Change Impact Assessment Studies

Cropping system study is not only useful to understand the overall sustainability of agricultural system, but also it helps in generating many important parameters which are useful in climate change impact assessment. Considering its importance, Space Applications Centre, took up a project for mapping and characterizing major cropping systems of Indo-Gangetic Plains of India. The study area included the five states of Indo-Gangetic Plains (IGP) of India, i.e. Punjab, Haryana, Uttar Pradesh, Bihar and West Bengal. There were two aspects of the study. The first aspect included state and district level cropping system mapping using multi-date remote sensing (IRS-AWiFS and Radarsat ScanSAR) data. The second part was to characterize the cropping system using moderate spatial resolution multi-date remote sensing data (SPOT VGT NDVI) and ground survey. The remote sensing data was used to compute three cropping system performance indices (Multiple Cropping Index, Area Diversity Index and Cultivated Land Utilization Index). Ground survey was conducted using questionnaires filled up by 1,000 farmers selected from 103 villages based on the cropping systems map. Apart from ground survey, soil and water sampling and quality analysis were carried out to understand the effect of different cropping systems and their management practices. The results showed that, rice-wheat was the major cropping system of the IGP, followed by Rice-Fallow-Fallow and Maize-Wheat. Other major cropping systems of IGP included Sugarcane based, Pearl millet-Wheat, Rice-Fallow-Rice, Cotton-Wheat. The ground survey could identify 77 cropping systems, out of which 38 are rice-based systems. Out of these 77 cropping systems, there were 5 single crop systems, occupying 6.5% coverage (of all cropping system area), 56 double crop systems with 72.7% coverage, and 16 triple crop systems with 20.8% coverage. The cropping system performance analysis showed that the crop diversity was found to be highest in Haryana, while the cropping intensity was highest in Punjab state.     

Evaluating a thermal image sharpening model over a mixed agricultural landscape in India

Fine spatial resolution (e.g., <300 m) thermal data are needed regularly to characterise the temporal pattern of surface moisture status, water stress, and to forecast agriculture drought and famine. However, current optical sensors do not provide frequent thermal data at a fine spatial resolution. The TsHARP model provides a possibility to generate fine spatial resolution thermal data from coarse spatial resolution (≥1 km) data on the basis of an anticipated inverse linear relationship between the normalised difference vegetation index (NDVI) at fine spatial resolution and land surface temperature at coarse spatial resolution. The current study utilised the TsHARP model over a mixed agricultural landscape in the northern part of India. Five variants of the model were analysed, including the original model, for their efficiency. Those five variants were the global model (original); the resolution-adjusted global model; the piecewise regression model; the stratified model; and the local model. The models were first evaluated using Advanced Space-borne Thermal Emission Reflection Radiometer (ASTER) thermal data (90 m) aggregated to the following spatial resolutions: 180 m, 270 m, 450 m, 630 m, 810 m and 990 m. Although sharpening was undertaken for spatial resolutions from 990 m to 90 m, root mean square error (RMSE) of <2 K could, on average, be achieved only for 990–270 m in the ASTER data. The RMSE of the sharpened images at 270 m, using ASTER data, from the global, resolution-adjusted global, piecewise regression, stratification and local models were 1.91, 1.89, 1.96, 1.91, 1.70 K, respectively. The global model, resolution-adjusted global model and local model yielded higher accuracy, and were applied to sharpen MODIS thermal data (1 km) to the target spatial resolutions. Aggregated ASTER thermal data were considered as a reference at the respective target spatial resolutions to assess the prediction results from MODIS data. The RMSE of the predicted sharpened image from MODIS using the global, resolution-adjusted global and local models at 250 m were 3.08, 2.92 and 1.98 K, respectively. The local model consistently led to more accurate sharpened predictions by comparison to other variants.     

Evaluation of classifiers for processing Hyperion (EO-1) data of tropical vegetation

There is an urgent necessity to monitor changes in the natural surface features of earth. Compared to broadband multispectral data, hyperspectral data provides a better option with high spectral resolution. Classification of vegetation with the use of hyperspectral remote sensing generates a classical problem of high dimensional inputs. Complexity gets compounded as we move from airborne hyperspectral to Spaceborne technology. It is unclear how different classification algorithms will perform on a complex scene of tropical forests collected by spaceborne hyperspectral sensor. The present study was carried out to evaluate the performance of three different classifiers (Artificial Neural Network, Spectral Angle Mapper, Support Vector Machine) over highly diverse tropical forest vegetation utilizing hyperspectral (EO-1) data. Appropriate band selection was done by Stepwise Discriminant Analysis. The Stepwise Discriminant Analysis resulted in identifying 22 best bands to discriminate the eight identified tropical vegetation classes. Maximum numbers of bands came from SWIR region. ANN classifier gave highest OAA values of 81% with the help of 22 selected bands from SDA. The image classified with the help SVM showed OAA of 71%, whereas the SAM showed the lowest OAA of 66%. All the three classifiers were also tested to check their efficiency in classifying spectra coming from 165 processed bands. SVM showed highest OAA of 80%. Classified subset images coming from ANN (from 22 bands) and SVM (from 165 bands) are quite similar in showing the distribution of eight vegetation classes. Both the images appeared close to the actual distribution of vegetation seen in the study area. OAA levels obtained in this study by ANN and SVM classifiers identify the suitability of these classifiers for tropical vegetation discrimination.     

Uncertainty in GPS Networks due to Remaining Systematic Errors: The Interval Approach

A realistic assessment of the total uncertainty budget of Global Positioning System (GPS) observations and its adequate mathematical treatment is a basic requirement for all analysis and interpretation of GPS-derived point positions, in particular GPS heights, and their respective changes. This implies not only the random variability but also the remaining systematic errors. At present in geodesy, the main focus is on stochastic approaches in which errors are modeled by means of random variables. Here, an alternative approach based on interval mathematics is presented. It allows us to model and to quantify the impact of remaining systematic errors in GPS carrier-phase observations on the final results using deterministic error bands. In this paper, emphasis is given to the derivation of the observation intervals based on influence parameters and to the study of the complex linear transfer of this type of uncertainty to estimated point positions yielding zonotopes. From the presented simulation studies of GPS baselines, it turns out that the uncertainty due to remaining systematic effects dominates the total uncertainty budget for baselines longer than 200 km.     

Simulation of the Ku-band Radar altimeter sea ice effective scattering surface

A radiative transfer model is used to simulate the sea ice radar altimeter effective scattering surface variability as a function of snow depth and density. Under dry snow conditions without layering these are the primary snow parameters affecting the scattering surface variability. The model is initialized with in situ data collected during the May 2004 GreenIce ice camp in the Lincoln Sea (73/spl deg/W; 85/spl deg/N). Our results show that the snow cover is important for the effective scattering surface depth in sea ice and thus for the range measurement, ice freeboard, and ice thickness estimation.     

The Global Impact of Clouds on the Production of MODIS Bidirectional Reflectance Model-Based Composites for Terrestrial Monitoring

A global data set of cloud occurrence probability derived from Moderate Resolution Imaging Spectroradiometer (MODIS) Terra and Aqua gridded daily data is analyzed to investigate the probability of obtaining at least a minimum number of cloud-free observations within various compositing periods. The probabilities derived from Terra and Aqua, with morning and afternoon overpass times, respectively, are similar and increase with compositing period. Compositing both Terra and Aqua observations results in considerably higher probabilities of obtaining a sufficient number of observations for bidirectional reflectance model-based compositing. Given that the only alternative to obtaining sufficient samples is to extend the observation period, which can cause significant problems when the surface state changes, it is concluded that using data from the two MODIS sensors provides the most effective way of generating composited products. Findings with respect to the availability of cloud-free composites when n-day composites are generated on a temporally overlapping daily rolling basis, i.e., every day, rather than every n-days, are also discussed for regional and global applications     

The Potential of the Maximum Cross-Correlation Technique to Estimate Surface Currents From Thermal AVHRR Global Area Coverage Data

Having already shown its potential of deriving the vector fields representing the ocean-surface advection from sequential 1.1-km-resolution local area coverage (LAC) Advanced Very High Resolution Radiometer (AVHRR) images, the maximum cross-correlation (MCC) technique here is applied to four 4.4-km-resolution global area coverage (GAC) AVHRR images. The resulting three vector fields are compared to the vector fields obtained from the LAC imagery corresponding to the same satellite passages. To quantify the reduction in accuracy inevitable when applying the method to the lower resolution imagery, the LAC vector fields were assumed to be error free. The deviation of the GAC vectors from the LAC vectors is expressed as percentage errors of the signal variance of meridional u and zonal v velocity components, and they are 16%/30%, respectively, for the best case and 62%/117% and 92%/111% for the other two cases. These results indicate that, in its present state, the GAC data do not allow the MCC technique to extract reliable current-vector information from it