Characterization and cycling of atmospheric mercury along the central US Gulf Coast

Concentrations of atmospheric Hg species, elemental Hg (Hg^°), reactive gaseous Hg (RGM), and fine particulate Hg (Hg-PM_2.5) were measured at a coastal site near Weeks Bay, Alabama from April to August, 2005 and January to May, 2006. Mean concentrations of the species were 1.6 ± 0.3 ng m⁻³, 4.0 ± 7.5 pg m⁻³ and 2.7 ± 3.4 pg m⁻³, respectively. A strong diel pattern was observed for RGM (midday maximum concentrations were up to 92.7 pg m⁻³), but not for Hg^° or Hg-PM_2.5. Elevated RGM concentrations (>25 pg m⁻³) in April and May of 2005 correlated with elevated average daytime O₃ concentrations (>55 ppbv) and high light intensity (>500 W m⁻²). These conditions generally corresponded with mixed continental-Gulf and exclusively continental air mass trajectories. Generally lower, but still elevated, RGM peaks observed in August, 2005 and January–March, 2006 correlated significantly (p < 0.05) with peaks in SO₂ concentration and corresponded to periods of high light intensity and lower average daytime O₃ concentrations. During these times air masses were dominated by trajectories that originated over the continent. Elevated RGM concentrations likely resulted from photochemical oxidation of Hg^° by atmospheric oxidants. This process may have been enhanced in and by the near-shore environment relative to inland sites. The marine boundary layer itself was not found to be a significant source of RGM.     

Biofacies analysis of Upper Cretaceous deposits in the Ust-Yenisei region: Implications of palynomorphs

The results of palynomorph biofacies analysis in the Upper Cretaceous deposits of the Ust-Yenisei region are presented. The established facies confinement and indicative features of separate palynomorph groups are used, along with identified dinocyst morphotypes and taxa, in paleogeographic reconstructions. Seven palynomorph associations characterizing continental, coastal-marine, shallow-and deep-water facies are distinguished based on quantitative proportions between morphological groupings and individual taxa. As boundaries between distinguishable biostratigraphic and facies subdivisions do not coincide, dinocysts were likely insignificantly dependent in distribution on facies in the West Siberian epicontinental basin at least. On the other hand, distribution trends of particular dinocyst morphotypes and other microphytofossils are correlative with transgressive-regressive cycles and can be used for reconstruction of paleoenvironments.     

Correlation of the Jurassic-Cretaceous siliceous-volcanogenic sediments in northwestern surroundings of the Pacific (Koryak Upland)

In distribution areas of the Pekul’neiveem and Chirynai formations customary distinguishable in the Koryak Upland, complicated tectonostratigraphic units are composed of alternating thrust sheets of different lithologic composition and age, which are juxtaposed because of widespread thrust faulting, as is proved by the radiolarian analysis. Nineteen radiolarian assemblages of different age are first established here in the Lower Jurassic-Hauterivian succession of siliceous-volcanogenic sediments. In the Lower Jurassic interval, the lower and upper Hettangian, lower and upper Sinemurian, and Pliensbachian beds are recognized. Paleontological characterization is also presented for the Aalenian (or Toarcian?-Aalenian), upper Bajocian, lower and upper Bathonian, and Callovian beds of the Middle Jurassic. Within the Upper Jurassic, the Oxfordian-early Kimmeridgian, late Kimmeridgian-early Tithonian, Tithonian, and late Tithonian-early Berriasian radiolarian assemblages are distinguished. The late Berriasian-early Valanginian, middle-late Valanginian, and Hauterivian radiolarian assemblages are first recognized or compositionally revised. Radiolarians and lithofacies data are used to correlate the tectonostratigraphic units and individualize the jasper-alkali basaltic (lower Hettangian), chert-terrigenous (Hettangian-Sinemurian), jasper-cherty (Pliensbachian-Aalenian), jasper (Bajocian-Hauterivian), jasper-basaltic (upper Bajocian-Valanginian), Fe-Ti basaltic (upper Bajocian-Bathonian), tuffitejasper-basaltic (Bathonian-Hauterivian), and terrigenous-volcanogenic (Bajocian-Valanginian) sequences. The correlation results are extrapolated into other continental areas flanking the Pacific, i.e., to the western Kamchatka, northern and northwestern coastal areas of the Sea of Okhotsk, where the analogous radiolarian assemblages are characteristic of comparable allochthonous units of terrigenous-siliceous-volcanogenic sediments.     

Geochronology of Pliocene volcanism in the Dzhavakheti Highland (the Lesser Caucasus). Part 1: Western part of the Dzhavakheti Highland

Isotopic-geochronological study of the Pliocene magmatic activity in western part of the Dzhavakheti Highland (northwestern region of the Lesser Caucasus) is carried out. The results obtained imply that the Pliocene magmatic activity lasted in this part of the highland approximately 2 million years from 3.75 to 1.75–1.55 Ma. As is established, the studied volcanic rocks correspond in composition mostly to K-Na subalkaline and more abundant normal basalts. Time constraints of main phases in development of basic volcanism within the study region are figured out. We assume that individual pulses of silicic to moderately silicic volcanism presumably took place in the Dzhavakheti Highland about 3.2 and 2.5 Ma ago.     

Planktonic foraminifers in the southern Bering Sea: Changes in composition and productivity during the Late Pleistocene-Holocene

Taxonomic composition and distribution of planktonic foraminifers are studied in section of Core GC-11 that penetrated through Upper Quaternary sediments of the Bowers Ridge western slope, the southern Bering Sea. As is shown, structure of foraminiferal assemblage and productivity have varied substantially during the last 32000 calendar years in response to changes in surface water temperatures and water mass circulation in the northern part of the Pacific, the Bering Sea included. The productivity was maximal during deglaciation epoch, being notably lower in the Holocene and minimal at the glaciation time.     

The Ruiga intrusion: A typical example of a shallow-facies paleoproterozoic peridotite-gabbro-komatiite-basaltic association of the Vetreny Belt,Southeastern Fennoscandia

The Ruiga differentiated mafic-ultramafic intrusion in the northwestern part of the Vetreny Belt paleorift was described for the first time based on geological, petrological, geochronological, and geochemical data. The massif (20 km² in exposed area) is a typical example of shallow-facies peridotite-gabbro-komatiite-basalt associations and consists of three zones up to 810 m in total thickness (from bottom to top): melanogab-bronorite, peridotite, and gabbro. In spite of pervasive greenschist metamorphism, the rocks contain locally preserved primary minerals: olivine (Fo _75–86), bronzite, augite of variable composition, labradorite, and Cr-spinels. A mineral Sm-Nd isochron on olivine melanogabbronorite from the Ruiga Massif defines an age of 2.39 ± 0.05 Ga, while komatiitic basalts of the Vetreny Belt Formation were dated at 2.40–2.41 Ga (Puchtel et al., 1997). The rocks of the Ruiga intrusion and lava flows of Mt. Golets have similar major, rare-earth, and trace element composition, which suggests their derivation from a single deep-seated source. Their parent magma was presumably a high-Mg komatiitic basalt. In transitional crustal chambers, its composition was modified by olivine-controlled fractionation and crustal contamination, with the most contaminated first portions of the ejected melt. In terms of geology and geochemistry, the considered magmatic rocks of the Vetreny Belt are comparable with the Raglan Ni-PGE komatiite gabbro-peridotite complex in Canada (Naldrett, 2003).     

Neoproterozoic Volhynia-Brest magmatic province in the western East European craton: Within-plate magmatism in an ancient suture zone

The reasons for the isotopic and geochemical heterogeneity of magmatism of the Neoproterozoic large Volhynia-Brest igneous province (VBP) are considered. The province was formed at 550 Ma in response to the break up of the Rodinia supercontinent and extends along the western margin of the East European craton, being discordant to the Paleoproterozoic mobile zone that separates Sarmatia and Fennoscandia and the Mesoproterozoic Volhynia-Orsha aulacogen. The basalts of VBP show prominent spatiotemporal geochemical zoning. Based on petrographic, mineralogical, geochemical, and isotopic data, the following types of basalts can be distinguished: olivine-normative subalkaline basalts consisting of low-Ti (sLT, < 1.10–2.0 wt % TiO₂; ε_Nd(550) from ?6.6 to ?2.7) and medium-Ti (sMT, 2.0–3.0 wt % TiO₂, occasionally up to 3.6 wt % TiO₂; ε_Nd(550) from ?3.55 to + 0.6) varieties; normal quartz-normative basalts (tholeiites) including low-Ti (tLT, < 1.75–2.0 wt % TiO₂) and medium-to-high-Ti (tHT1, 2.0–3.6 wt % TiO₂, ε_Nd(550) from ?1.3 to + 1.0) varieties. The hypabyssal bodies are made up of subalkaline low-Ti olivine dolerites (LT, 1.2–1.5 wt % TiO₂; ε_Nd(550) = ?5.8) and subalkaline high-Ti olivine gabbrodolerites (HT2, 3.0–4.5 wt % TiO₂; ε_Nd(550) = ?2.5). Felsic rocks of VBP are classed as volcanic rocks of normal (andesidacites, dacites, and rhyodacites) and subalkaline (trachyrhyodacites) series with TiO₂ 0.72–0.77 wt% and ε_Nd(550) of ?12. The central part of VBP is underlain by a Paleoproterozoic domain formed by continent-arc accretion and contains widespread sills of HT2 dolerites and lavas of LT basalts; the northern part of the province is underlain by the juvenile Paleoproterozoic crust dominated by MT and HT1 basalts. MT and LT basalts underwent significant AFC-style upper crustal contamination. During their long residence in the upper crustal magmatic chambers, the basaltic melts fractionated and caused notable heating of the wall rocks and, correspondingly, nonmodal melting of the upper crustal protolith containing high-Rb phase (biotite), thus producing the most felsic rocks of the province. The basalts of VBP were derived from geochemically different sources: probably, the lithosphere and a deep-seated plume (PREMA type). The HT2 dolerites were generated mainly from a lithospheric source: by 3–4% melting of the geochemically enriched garnet lherzolite mantle. LT dolerites were obtained by partial melting of the modally metasomatized mantle containing volatile-bearing phases. The concepts of VBP formation were summarized in the model of three-stage plume-lithosphere interaction.     

Dissolved and labile concentrations of Cd, Cu, Pb, and Zn in the South Fork Coeur d’Alene River, Idaho: Comparisons among chemical equilibrium models and implications for biotic ligand models

In order to evaluate thermodynamic speciation calculations inherent in biotic ligand models, the speciation of dissolved Cd, Cu, Pb, and Zn in aquatic systems influenced by historical mining activities is examined using equilibrium computer models and the diffusive gradients in thin films (DGT) technique. Several metal/organic-matter complexation models, including WHAM VI, NICA-Donnan, and Stockholm Humic model (SHM), are used in combination with inorganic speciation models to calculate the thermodynamic speciation of dissolved metals and concentrations of metal associated with biotic ligands (e.g., fish gills). Maximum dynamic metal concentrations, determined from total dissolved metal concentrations and thermodynamic speciation calculations, are compared with labile metal concentrations measured by DGT to assess which metal/organic-matter complexation model best describes metal speciation and, thereby, biotic ligand speciation, in the studied systems. Results indicate that the choice of model that defines metal/organic-matter interactions does not affect calculated concentrations of Cd and Zn associated with biotic ligands for geochemical conditions in the study area, whereas concentrations of Cu and Pb associated with biotic ligands depend on whether the speciation calculations use WHAM VI, NICA-Donnan, or SHM. Agreement between labile metal concentrations and dynamic metal concentrations occurs when WHAM VI is used to calculate Cu speciation and SHM is used to calculate Pb speciation. Additional work in systems that contain wide ranges in concentrations of multiple metals should incorporate analytical speciation methods, such as DGT, to constrain the speciation component of biotic ligand models.     

The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H₂SO₄, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L⁻¹, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe–oxyhydroxysulfates (Fe(III)–SO₄–H⁺ solutions) or Fe–oxyhydroxychlorides (Fe(III)–Cl–H⁺ solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to 6–7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)–SO₄–H⁺ solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)–Cl–H⁺ solutions.