The Potential for Environmentally Sound Development of Marine Deposits of Potassic and Phosphatic Minerals Offshore, Southern Africa

Extensive potassium and phosphorous-rich mineralization occurs on the outer continental shelf of the southern and west coasts of South Africa and Nambia. This article reviews the potential of exploiting these deposits in an environmentally sound manner for the manufacture of fertilizer. At present, reserves of potash and phosphate fertilizer are exploited from terresterial deposits, the majority being surface mined. The use of fertilizer in South Africa has shown no growth in the past 13 years, and, in some years, usage has even declined. On average, over the last decade, South Africa has consumed 2 million Mt of fertilizer (including nitrogen) per annum, the vast majority of phosphate fertilizer being produced by FOSKOR from the Phalaborwa Igneous Complex. Potash fertilizer is imported into South Africa. Although fertilizer consumption is expected to decrease in the short-term, there are good future prospects for the domestic and international fertilizer market. Considerable research into both glauconitic (containing K 2 O) and phosphatic deposits along the southern African continental shelf indicate that these sedimentary deposits have a complex genesis and mineralization. Of the total K 2 O reserves of 1300 million Mt on the southern African margin, 1000 million Mt is located off the southern African west coast, and the remainder situated on the Agulhas Bank. The largest glauconite concentration ( ±300 million Mt K 2 O) off southern Africa lies west of Saldanha Bay, South Africa. The distribution of P 2 O 5 off southern Africa is dominated by the vast deposit between Walvis Bay and Luderitz, Nambia. This reserve is estimated to contain 1000 million Mt of greater than 5% P 2 O 5 in a relatively small area of about 10000 km2. The phosphorite deposit south of Saldanha Bay constitutes a reserve of ±3500 million Mt of apatite and the deposit on the Agulhas Bank comprises 5500 million Mt. The phosphate deposit off Saldanha Bay occurs as an extensive, low to medium grade deposit. Although vast resources of potash and phosphatic minerals occur along the southern African outer continental shelf the expensive nature of marine exploitation may render most of these deposits, especially the phosphates, subeconomic. The low price of fertilizer andextensive natureontheonland deposits, although confined to asmallnumber of countries, mean that it will not be financially viable to extract these deposits. Assuming high grade glauconitic sand with the right composition can be located, the high market price indicates good future prospects for these potash deposits.     

Usefulness of classification and index properties of clay-rich sediments in evaluating sea-bed environmental conditions

A comprehensive study of undisturbed, mostly silty clay samples, taken from large-diameter surface cores collected in the North Atlantic and its bordering seas, shows that measurement of the Atterberg limits, water content, specific gravity of grains and grain-size distribution can provide the basis for predicting many seabed geotechnical and geophysical properties which can lead to a quick assessment of environmental conditions. Thus, the sediment compression curve can be reconstructed, acoustic properties assessed, electrical and thermal resistivities deduced and an indication of the shearing forces, which have affected the sediment, inferred.     

Oxidative stress in ecotoxicology: from the analysis of individual antioxidants to a more integrated approach

An integrate approach will be discussed for investigations on oxidative stress in xenobiotic toxicity. While the analysis of individual antioxidants is useful for their sensitivity and to understand the mode of action of a stressor, the integration with the analysis of the total antioxidant capacity provides a more holistic assessment of the overall biological significance of such variations. TOSC has a greater predictive value on the health condition of the organisms and allows to discriminate the different role of specific ROS in oxidative stress syndrome.     

Regeneration of sand waves after dredging

Sand waves are large bed waves on the seabed, being a few metres high and lying hundreds of metres apart. In some cases, these sand waves occur in navigation channels. If these sand waves reduce the water depth to an unacceptable level and hinder navigation, they need to be dredged. It has been observed in the Bisanseto Channel in Japan that the sand waves tend to regain their shape after dredging. In this paper, we address modelling of this regeneration of sand waves, aiming to predict this process. For this purpose, we combine a very simple, yet effective, amplitude-evolution model based on the Landau equation, with measurements in the Bisanseto Channel. The model parameters are tuned to the measured data using a genetic algorithm, a stochastic optimization routine. The results are good. The tuned model accurately reproduces the measured growth of the sand waves. The differences between the measured weave heights and the model results are smaller than the measurement noise. Furthermore, the resulting parameters are surprisingly consistent, given the large variations in the sediment characteristics, the water depth and the flow field. This approach was tested on its predictive capacity using a synthetic test case. The model was tuned based on constructed predredging data and the amplitude evolution as measured for over 2 years. After tuning, the predictions were accurate for about 10 years. Thus, it is shown that the approach could be a useful tool in the optimization of dredging strategies in case of dredging of sand waves.     

Effect of free surface and strut on fins attached to a strut

An extensive experimental and computational investigation of the combined and separate effects of free surface and body on the lift characteristics of a pair of fins attached to a strut and fin alone is conducted. The results reveal that the free-surface effect becomes significant when the depth of submergence to chord ratio (H/c) is less than three. The effect of the strut is also realized for shallower depth of submergence of the fins through free-surface deformation leading to a significant change in the incidence angle of the flow to the fins. The numerical results based on the Higher Order Boundary Element Method with the linearized free-surface condition show good agreement with the experimental results for fin (foil) alone even at shallow submergence, but some discrepancies appear for the fin attached to the strut at higher speeds mostly due to the neglect of the nonlinear free-surface effect.     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

Impact of Satellite Altimetry on Simulations of Sea Level Variability by an Indian Ocean Model

This article describes the impact of satellite altimeter data on the simulations of sea level variability (SLV) by a nonlinear reduced gravity model of the entire Indian Ocean. The model has been forced by 6-hourly analyzed wind stress data containing SSM/I observations and has been able to produce realistic circulation features. However, SLV values observed by Topex/Poseidon altimeter do not fit these simulations because of imperfect initial data. Hence an attempt has been made to initialize the model using altimeter data. The initialized model-generated SLVvalues have been compared with SLV derived by altimeter for monsoon as well as nonmonsoon months of 1996. Experimental runs have been performed for 10 days, 20 days, and one month. It has been found that the initialized model results on the final day of these experiments are in very good agreement with altimeter data of the same day. It is thus possible, in principle, to hindcast and forecast sea level variations in the time scale of 10 days to one month with the availability of good quality wind data for forcing the model and altimeter observations of sea level for initializing it.