S, O and Sr isotope systematics of active vent materials from the Mariana backarc basin spreading axis at 18°N

Stable isotope ratios of S, O and Sr have been measured for active vent materials which were first found and sampled in April 1987 from the Mariana backarc spreading axis at 18°N. Chimneys consisted mostly of barite with a lesser proportion of sulfide minerals such as sphalerite, galena, chalcopyrite and pyrite. Theδ³⁴S values of sphalerite and galena taken from several chimneys and various parts of a chimney showed a narrow range from 2.1 to 3.1‰, suggesting uniform conditions of fluid chemistry during chimney growth. The sulfur isotopic results imply a contribution of hydrogen sulfide reduced from seawater sulfate in the deep hydrothermal reaction zone, considering that fresh glasses of the Mariana Trough basalts haveδ³⁴S= −0.6 ± 0.3‰. Sulfur isotopic compositions of hydrogen sulfide in the high temperature vent fluids (δ³⁴S= 3.6–4.8‰) which are higher than those of the sulfide minerals suggest the secondary addition of hydrogen sulfide partially reduced from entrained seawater SO₄²⁻ at a basal part of the chimneys. This interpretation is consistent with theδ³⁴S values of barite (21–22‰) that are higher than those of seawater sulfate. The residence time of the entrained SO₄²⁻ was an order of an hour on a basis of oxygen isotopic disequilibrium of barite. Strontium isotopic variations of barite and vent waters indicated that Sr in barite was mostly derived from the Mariana Trough basalts with a slight contribution from Sr in circulating sea-water, and that 10–20% mixing of seawater with ascending hydrothermal fluids induced precipitation of barite at the sea-floor.     

Strontium, oxygen, and hydrogen isotope geochemistry of hydrothermally altered and weathered rocks in DSDP Hole 504B, Costa Rica Rift

DSDP Hole 504B was drilled into 6 Ma crust, about 200 km south of the Costa Rica Rift, Galapagos Spreading Center, penetrating 1.35 km into a section that can be divided into four zones—Zone I: oxic submarine weathering; Zone II: anoxic alteration; Zones III and IV: hydrothermal alteration to greenschist facies. In Zone III there is intense veining of pillow basalts. Zone IV consists of altered sheeted dikes. Isotopic geochemical signatures in relation to the alteration zones are recorded in Hole 504B, as follows:

Zone	Depth(m)	Average87Sr/86Sr	Average δ18O (%o)	Average δD (%o)
I	275–550	0.7032	7.3	−63
II	550–890	0.7029	6.5	−45
III	890–1050	0.7035	5.6	−31
IV	1050–1350	0.7032	5.5	−36

Full-size table

Alteration temperatures are as low as 10°C in Zones I and II based on oxygen isotope fractionation. Strontium isotopic data indicate that a circulation of seawater is much more restricted in Zone II than in Zone I. Fluid inclusion measurements of vein quartz indicate the alteration temperature was mainly 300 ± 20°C in Zones III and IV, which is consistent with secondary mineral assemblages.The strontium, oxygen, and hydrogen isotopic compositions of hydrothermal fluids which were responsible for the greenschist facies alteration in Zones III and IV are estimated to be 0.7037, 2‰, and 3‰, respectively. Strontium and oxygen isotope data indicate that completely altered portions of greenstones and vein minerals were in equilibrium with modified seawater under low water/rock ratios (in weight) of about 1.6. This value is close to that of the end-member hydrothermal fluids issuing at 21°N EPR.Basement rocks are not completely hydrothermally altered. About 32% of the greenstones in Zones III and IV have escaped alteration. Thus 1 g of fresh basalt including the 32% unaltered portion are required in order to make 1 g of end-member solution from fresh seawater in water-rock reactions.     

Incorporation of Be isotopes and other trace metals into marine ferromanganese deposits

Two-to threefold inward increase of ¹⁰Be, ⁹Be, Cu and Ni have been found in surface layers of marine ferromanganese deposits. We interpret this phenomenon as reflecting the manner in which the Be isotopes and probably other trace metals (e.g. Cu and Ni) are incorporated. On reaching the sea floor exchangeable Be is released from its carrier phase to the pore water of the ferromanganese deposits, diffuses inward and gets fixed into the deposits. The fixation process may be related to the mineralogical reorganizations suggested by previous studies. We have modeled this concept and applied it to a Mn crust on which detailed analyses of Cu, Ni and natural decay-series nuclides, as well as Be isotopes are made. Post-depositional fixation of Th isotopes may also occur. The redistributions of Be and Th isotopes are confined to regions very close to the surface of the deposits. For all practical purposes, they will not affect growth rate determinations conventionally done using these isotopes. The “linearly” extrapolated ${}^{10}\text{Be}{}^9\text{Be}$ ratio to the surface from deep layers of a Mn deposit does not necessarily represent that ratio in sea water.     

P-wave velocity structure of the margin of the southeastern Tsushima Basin in the Japan Sea using ocean bottom seismometers and airguns

The Tsushima Basin is located in the southwestern Japan Sea, which is a back-arc basin in the northwestern Pacific. Although some geophysical surveys had been conducted to investigate the formation process of the Tsushima Basin, it remains unclear. In 2000, to clarify the formation process of the Tsushima Basin, the seismic velocity structure survey with ocean bottom seismometers and airguns was carried out at the southeastern Tsushima Basin and its margin, which are presumed to be the transition zone of the crustal structure of the southwestern Japan Island Arc. The crustal thickness under the southeastern Tsushima Basin is about 17 km including a 5 km thick sedimentary layer, and 20 km including a 1.5 km thick sedimentary layer under its margin. The whole crustal thickness and thickness of the upper part of the crust increase towards the southwestern Japan Island Arc. On the other hand, thickness of the lower part of the crust seems more uniform than that of the upper part. The crust in the southeastern Tsushima Basin has about 6 km/s layer with the large velocity gradient. Shallow structures of the continental bank show that the accumulation of the sediments started from lower Miocene in the southeastern Tsushima Basin. The crustal structure in southeastern Tsushima Basin is not the oceanic crust, which is formed ocean floor spreading or affected by mantle plume, but the rifted/extended island arc crust because magnitudes of the whole crustal and the upper part of the crustal thickening are larger than that of the lower part of the crustal thickening towards the southwestern Japan Island Arc. In the margin of the southeastern Tsushima Basin, high velocity material does not exist in the lowermost crust. For that reason, the margin is inferred to be a non-volcanic rifted margin. The asymmetric structure in the both margins of the southeastern and Korean Peninsula of the Tsushima Basin indicates that the formation process of the Tsushima Basin may be simple shear style rather than pure shear style.     

Gender analysis of fear and mobility in the context of ethnic conflict in Kayah State,Myanmar

Kayah State has faced prolonged conflict for the past six decades. The conflict has affected all the people of Kayah, though the nature and extent of the impact varies by age, gender and class. Caught between the ethnic armed groups and military and brutalized by both, the people of Kayah have struggled to survive. The conflict has further restricted the mobility of an already isolated people. This lack of mobility has affected every aspect of their lives including livelihood, access to education and markets, and religious and social networks. Women's mobility is more restricted than that of men, and the different levels of mobility have in turn led to different strategies to survive the conflict. While men can leave the area for work and education, women cannot. Staying in the conflict zone increases both their vulnerability and isolation. The increased isolation affects their position within the family and community, as they have less confidence, voice and decision‐making power. Women use silence and submissiveness to escape from both the military and the ethnic armed groups. However, such strategies, in the long term, continue to perpetuate women's subordinate position in society. They also reinforce women's powerlessness and maintain the current power structures and hierarchies.     

Geochemistry of the magmatic–hydrothermal system of Kawah Ijen volcano, East Java, Indonesia

Samples from Kawah Ijen crater lake, spring and fumarole discharges were collected between 1990 and 1996 for chemical and isotopic analysis. An extremely low pH (<0.3) lake contains SO₄–Cl waters produced during absorption of magmatic volatiles into shallow ground water. The acidic waters dissolve the rock isochemically to produce “immature” solutions. The strong D and ¹⁸O enrichment of the lake is mainly due to enhanced evaporation at elevated temperature, but involvement of a magmatic component with heavy isotopic ratios also modifies the lake D and ¹⁸O content. The large Δ_SO4–S⁰ (23.8–26.4‰) measured in the lake suggest that dissolved SO₄ forms during disproportionation of magmatic SO₂ in the hydrothermal conduit at temperatures of 250280°C. The lake δ¹⁸O_SO4 and δ¹⁸O_H2O values may reflect equilibration during subsurface circulation of the water at temperatures near 150°C. Significant variations in the lake's bulk composition from 1990 to 1996 were not detected. However, we interpret a change in the distribution and concentration of polythionate species in 1996 as a result of increased SO₂-rich gas input to the lake system.Thermal springs at Kawah Ijen consist of acidic SO₄–Cl waters on the lakeshore and neutral pH HCO₃–SO₄–Cl–Na waters in Blawan village, 17 km from the crater. The cation contents of these discharges are diluted compared to the crater lake but still do not represent equilibrium with the rock. The SO₄/Cl ratios and water and sulfur isotopic compositions support the idea that these springs are mixtures of summit acidic SO₄–Cl water and ground water.The lakeshore fumarole discharges (T=170245°C) have both a magmatic and a hydrothermal component and are supersaturated with respect to elemental sulfur. The apparent equilibrium temperature of the gas is 260°C. The proportions of the oxidized, SO₂-dominated magmatic vapor and of the reduced, H₂S-dominated hydrothermal vapor in the fumaroles varied between 1979 and 1996. This may be the result of interaction of SO₂-bearing magmatic vapors with the summit acidic hydrothermal reservoir. This idea is supported by the lower H₂S/SO₂ ratio deduced for the gas producing the SO₄–Cl reservoir feeding the lake compared with that observed in the subaerial gas discharges. The condensing gas may have equilibrated in a liquid–vapor zone at about 350°C.Elemental sulfur occurs in the crater lake environment as banded sediments exposed on the lakeshore and as a subaqueous molten body on the crater floor. The sediments were precipitated in the past during inorganic oxidation of H₂S in the lake water. This process was not continuous, but was interrupted by periods of massive silica (poorly crystallized) precipitation, similar to the present-day lake conditions. We suggest that the factor controlling the type of deposition is related to whether H₂S- or silica-rich volcanic discharges enter the lake. This could depend on the efficiency with which the lake water circulates in the hydrothermal cell beneath the crater. Quenched liquid sulfur products show δ³⁴S values similar to those found in the banded deposits, suggesting that the subaqueous molten body simply consists of melted sediments previously accumulated at the lake bottom.     

Subduction of the Woodlark Basin at New Britain Trench, Solomon Islands region

The Woodlark Basin, located south of the Solomon Islands arc region, is a young (5 Ma) oceanic basin that subducts beneath the New Britain Trench. This region is one of only a few subduction zones in the world where it is possible to study a young plate subduction of several Ma. To obtain the image of the subducting slab at the western side of the Woodlark Basin, a 40-day Ocean Bottom Seismometer (OBS) survey was conducted in 1998 to detect the micro-seismic activity. It was the first time such a survey had been performed in this location and over 600 hypocenters were located. The seismic activity is concentrated at the 10–60 km depth range along the plate boundary. The upper limit just about coincides with the leading edge of the accretionary wedge. The upper limit boundary was identified as the up-dip limit of the seismogenic zone, whereas the down-dip limit of the seismogenic zone was difficult to define. The dip angle of the plate at the high seismicity zone was found to average about 30°. Using the Cascadia subduction zone for comparison, which is a typical example of a young plate subduction, suggests that the subduction of the Woodlark Basin was differentiated by a high dip angle and rather landward location of the seismic front from the trench axis (30 km landward from the trench axis). Furthermore, as pointed out by previous researchers, the convergent margin of the Solomon Islands region is imposed with a high stress state, probably due to the collision of the Ontong Java Plateau and a rather rapid convergence rate (10 cm/year). The results of the high angle plate subduction and inner crust earthquakes beneath the Shortland Basin strongly support the high stress state. The collision of the Ontong Java Plateau, the relatively rapid convergence rate, and moderately cold slab as evidenced by low heat flow, rather than the plate age, may be dominantly responsible for the geometry of the seismogenic zone in the western part of the Woodlark Basin subduction zone.     

Assessment of shallow groundwater in Lake Nyos catchment (Cameroon,Central-Africa): implications for hydrogeochemical controls and uses

In 1986, carbon dioxide gas exploded from Lake Nyos and killed about 1,800 people. After that disaster, various administrative and research activities have been conducted to mitigate subsequent disasters. However, none of those endeavors have characterized the groundwater chemistry to identify hydrogeochemical processes that control the water chemistry, and the quality of the water for domestic and agricultural uses that support the lives of un-official resettlers around Lake Nyos. Conventional hydrochemical techniques coupled with statistical and graphical analysis were therefore employed to establish the baseline hydrochemical conditions, assess processes controlling solutes distribution in shallow groundwater in the Lake Nyos catchment and explore its usability. Groundwater samples were analyzed for their physical and chemical properties. The wide ranges of electrical conductivity and total dissolved solid values reveal the heterogeneous distribution of groundwater within the watershed. The relative abundance of major dissolved species was Ca > Mg > Na > K for cations and HCO₃ >>> Cl > SO₄ > NO₃ for anions. Piper diagram classified almost all water samples into mixed CaMg–HCO₃ water type. Major ion geochemistry reveals that, in addition to silicates weathering (water–rock interaction), ion exchange processes regulate the groundwater chemistry. Principal component analysis supports the occurrence of water rock interaction. Hierarchical cluster analysis showed that the chemistry of groundwater in the study area is controlled by three main factors, and suggests no hydraulic connectivity between deep lake water and groundwater in the catchment. The quality assessment of the groundwater showed that groundwater parameters are within the acceptable limit of the World Health Organization and Nigeria guidelines for drinking and domestic uses, and water found to be good for irrigation.     

Unstructured grid generation using LiDAR data for urban flood inundation modelling

Inundation disasters, caused by sudden water level rise or rapid flow, occur frequently in various parts of the world. Such catastrophes strike not only in thinly populated flood plains or farmland but also in highly populated villages or urban areas. Inundation of the populated areas causes severe damage to the economy, injury, and loss of life; therefore, a proper management scheme for the disaster has to be developed. To predict and manage such adversity, an understanding of the dynamic processes of inundation flow is necessary because risk estimation is performed based on inundation flow information. In this study, we developed a comprehensive method to conduct detailed inundation flow simulations for a populated area with quite complex topographical features using LiDAR (Light Detection and Ranging) data. Detailed geospatial information including the location and shape of each building was extracted from the LiDAR data and used for the grid generation. The developed approach can distinguish buildings from vegetation and treat them differently in the flow model. With this method, a fine unstructured grid can be generated representing the complicated urban land features precisely without exhausting labour for data preparation. The accuracy of the generated grid with different grid spacing and grid type is discussed and the optimal range of grid spacing for direct representation of urban topography is investigated. The developed method is applied to the estimation of inundation flows, which occurred in the basin of the Shin‐minato River. A detailed inundation flow structure is represented by the flow model, and the flow characteristics with respect to topographic features are discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Chemical and isotopic characteristics of fluids along the Cameroon Volcanic Line, Cameroon

Results of the chemical and isotopic analysis of the water and gases discharged from volcanic crater lakes and soda springs located along the Cameroon Volcanic Line were used to characterize and infer their genetic relationships. Variations in the solute compositions of the waters indicate the dominant influence of silicate hydrolysis. Na⁺ (40–95%) constitutes the major cation in the springs while Fe²⁺ + Mg²⁺ (70%) dominate in the CO₂-rich lakes. The principal anion is HCO₃ (>90%), except in the coastal springs where Cl-predominates. Lakes Nyos and Monoun have FeMgCaHCO₃⁻ type signatures; the soda springs are essentially NaHCO₃⁻ type, while all other lakes show similar ionic compositions to dilute surface waters. Dissolved gases show essentially CO₂ (>90%), with small amounts of Ar and N₂, while CH₄ constitutes the principal component in the non-gassy lakes. Active volcanic gases are generally absent, except in the Lobe spring with detectable H₂S. Stable isotope ratio evidence indicates that the bicarbonate waters are essentially of meteoric origin. CO₂ (δ¹³C = −2 to −8%₀ and He (³He/⁴He = 1 to 5.6R_a) infer a mantle contribution to the total CO₂. CH₄ has a biogenic source, while Ar and N₂ are essentially atmospheric in origin, but mixing is quite common.