Zircon sensitive high mass-resolution ion microprobe U–Pb and fission-track ages for gabbros and sheeted dykes of the Taitao ophiolite, Southern Chile, and their tectonic implications

Abstract   The Late Miocene–Pliocene Taitao ophiolite is composed of a complete sequence of classic oceanic lithosphere and is exposed approximately 50 km southeast of the Chile triple junction, where the Chile Ridge subducts beneath the South American Plate. Gabbros and ultramafic rocks are folded into a complex pattern, but only evidence for block rotation has been reported in the overriding sheeted dyke complex. In the present study, sensitive high mass-resolution ion microprobe U–Pb and fission-track dating methods were applied to zircon crystals separated from gabbros and sheeted dykes. Two sets of radiometric ages of gabbros range between 5.9 ± 0.4 and 5.6 ± 0.1 Ma. These ages coincide within their error ranges and imply rapid intrusion and cooling of gabbros. The U–Pb age of a dacite dyke intruded into the sheeted dyke complex was determined to be 5.2 ± 0.2 Ma. These data indicate that the magmas of the Taitao ophiolite were formed during the 6 Ma Chile Ridge collision event and emplaced in a shorter period than previously thought. A short segment of the Chile Mid-oceanic Ridge must have been emplaced during the 6 Ma event.     

Paleoclimatic Change Inferred from Carbon Isotope Composition of Organic Matter in Sediments of Dabusu Lake, Jilin Province, China

Study on the organic compounds and stable isotope composition of a sediment section in Dabusu Lake revealed that the organic materials in the sediments came mainly from terrestrial plants brought into the lake by rtmoff.The δ^13 C of the organic materials had high values during warm-dry climatic stages and decreased in cold-wet stages.Analysis of data on carbonate content and ^14C age showed that the lake basin had experienced several wet-cold and warm-dry climatic cycles since 15000 a BP. Since 6700 a BP, the climate reached a relatively stable warm-dry stage,so that the lake water was gradually condensed and finally a saline lake was formed.     

Lithology, Biostratigraphy, and Magneto stratigraphy of Gas Hydrate-Bearing Sediments in the Eastern Nankai Trough

Abstract: Stratigraphic controls on the formation and distribution of gas hydrates were examined for sediments from a BH-1 well drilled in the landward slope of the Nankai Trough, approximately 60 km off Omaezaki, Japan. Three lithologic units were recognized in the 250 m-thick sequence of sediments: Unit 1 (0–70 mbsf) consists of calcareous silt and clay with thin volcanic ash layers, Unit 2 (70–150 mbsf) consists of calcareous silt and clay with volcanic ash and thin sand layers, and Unit 3 (150–250 mbsf) consists of weakly consolidated calcareous silt and clay with thick and frequent sand layers. Soupy structures and gas bubbles in the sediments indicate the presence of two hydrate zones between 40 and 130 mbsf and below 195 mbsf. Nannofossil biostratigraphy and magnetostratigraphy indicate that the sequence recovered at the BH-1 well is mostly continuous and represents sediments deposited from 0 to 1.5 Ma. Calculation of the sedimentation rate reveals a condensed section between 65 and 90 mbsf. The inferred distribution of gas hydrates in the BH-1 well appears to be strongly controlled by the stratigraphy and lithology of the sediments. Thick, gently inclined sand layers in Unit 3 provide a conduit for the migration of gases from deeper regions, and are considered responsible for the formation of the hydrate zone below 195 mbsf. At shallower levels, thin, gently inclined sand layers are also considered to allow for the migration of gases, leading to the formation of the upper hydrate zone between 40 and 130 mbsf. The overlying sub-horizontal silt and clay of the condensed section, truncating the underlying gently inclined sand and silt/clay layers, may provide an effective trap for gases supplied through the sand layers, further contributing to hydrate formation in the upper hydrate zone.     

Dibenzofurans a greater global pollutant than dioxins ? : Evidence from analyses of open ocean killer whale

Three specimens of killer whales (Orcinus orca), an open ocean carnivore, were analysed for extremely toxic polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) to understand their long-range distribution patterns. Several PCDF congeners, including the highly toxic 2,3,7,8-tetra- and 2,3,4,7,8-penta-CDFs were identified in the blubber of those specimens. The PCDF isomeric pattern in killer whale is more complex than the reported patterns in humans and birds, indicating the weaker metabolic potency of killer whales for these toxic compounds. High levels of PCBs (about 400 mg kg⁻¹) have also been detected in those specimens. The 2,3,7,8-substituted PCDF congeners identified in commercial PCBs were also found in killer whale, indicating PCBs as the possible source. Isomer-specific and trace level determinations of PCDD in killer whale, revealed no detectable quantities. The detection of comparatively high levels ( > 300 ng kg⁻¹) of PCDFs and undetection of PCDDs in open ocean killer whales suggest that PCDFs are more ubiquitous than PCDDs.     

Comparison of sinking particles in the upper 200 m between subarctic station K2 and subtropical station S1 based on drifting sediment trap experiments

Drifting sediment trap experiments were conducted during various seasons to elucidate the characteristics of particles sinking through the upper 200 m of the water column in the western Pacific at subarctic station K2 and subtropical station S1. The sinking particle flux increased when primary productivity was high at each station, during June–July at K2 and during February at S1. Biogenic opal (Opal) and CaCO₃ were the major components of the fluxes at K2 and S1, respectively. Contrary to the expectation of a high flux at the eutrophic station K2 and low flux at the oligotrophic station S1, the annual average organic carbon fluxes at 100 m were comparable at both stations: 62.7 mg C m^?2 day^?1 at K2 and 56.1 mg C m^?2 day^?1 at S1. The similarity of the fluxes was perhaps a reflection of the unexpectedly high primary production at S1. At K2, the organic carbon export ratio (organic carbon flux/primary productivity) was significantly and negatively correlated with primary production and tended to decrease with depth. The magnitude of the rate of attenuation of the organic carbon flux with depth was larger at S1 than at K2. This rate of attenuation tended to decrease and increase with primary production at K2 and S1, respectively. The explanation for these patterns may be that the flux of labile organic carbon at relatively shallow depths decreased with increasing primary production at K2, and zooplankton grazing pressure increased with increasing primary productivity at S1.     

Organochlorine contamination in some odontoceti species from the North Pacific and Indian Ocean

Concentrations of persistent organochlorines were determined in the blubber and melon of 11 species of adult male odontocetis collected from the North Pacific, Indian Ocean and nearby seas. Mean concentrations of DDs (33 μg/g wet wt) were the highest followed by PCBs (32 μg/g wet wt), chlordane compounds (CHLs: 3.7 μg/g wet wt), HCHs (1.1 μg/g wet wt), and HCB (0.32 μg/g wet wt). Odontoceti species inhabiting temperate waters revealed maximum residual concentrations of these contaminants, and the elevated DDT and PCB residues detected seem to suggest that some of the present species might potentially be at high risk. Relatively high DDT concentrations were found in tropical water species, which could be attributed to the current usage of DDT in the tropics and the less movable nature of this compound via long-range atmospheric transport. The HCH levels in animals inhabiting cold and temperate waters were higher than those inhabiting tropical waters, a result that was perhaps reflective of atmospheric transport from the tropical source to the northern sinks. A similar pattern was also observed in PCBs, CHLs and HCB, probably indicating the ongoing discharge of these compounds from mid-latitudes as well as those originating in tropical regions.     

Vertical transport and residence time of chlorinated hydrocarbons in the open ocean water column

The vertical transport of PCBs and chlorinated hydrocarbon pesticides such as DDT compounds and HCH (BHC) isomers in the deep sea are discussed on basis of their vertical profiles and the proportion of their adsorbed and dissolved fractions in surface water surveyed in the Western Pacific, Eastern Indian and Antarctic Oceans.All chlorinated hydrocarbons determined were detected with measurable concentrations throughout the water column, even at depths of several thousand meters. The vertical distributions of PCBs and DDT compounds were found to show small variations in concentration throughout the water column, whereas HCH isomer concentrations decreased systematically with depth. A large portion of DDT compounds in surface water was adsorbed on suspended solids, while most of the HCH isomers were present in the filtered water. The proportion of PCBs adsorbed on suspended solids was smaller than the proportion of DDT compounds, but was much greater than that of HCH isomers. These observations suggest that HCH isomers have been slowly scavenged from the surface to the deeper layers in the water column, while PCBs and DDT compounds have been rapidly and abundantly transported downward by sinking particles.The percentages of chlorinated hydrocarbons adsorbed on suspended solids in surface water increased towards the high latitude locations, and the percentage seemed to be proportional to the concentration of suspended solids in the surface water. This implies that the residence time of chlorinated hydrocarbons in the water column will differ significantly among oceans that differ in primary productivity. According to our estimation based on the data presented in this study, the residence time ofHCH in the euphotic zone, the top 100 m of the water column, is more than 2 years, whereas those of PCBs andDDT are less than 1 year. The longest residence time, of from 5 to 10 years, was obtained forHCH in oligotrophic water of the western North Pacific. The shortest value, only 11 to 19 days, was estimated forDDT in the Antarctic Ocean.     

Experimental studies on the possible influences of composition changes of pore water on the stability conditions of methane hydrate in marine sediments

Experiments with a set of electrolyte solutions have been carried out to investigate the effects of pore water composition changes on the stability conditions of methane hydrate in marine sediments. The results reveal that (1) SO₄²⁻ and Cl⁻ concentration changes can affect hydrate stability slightly, (2) the changes in both the type and the concentration of cations, which occur in normal diagenetic processes, do not exert a significant influence on the methane hydrate stability conditions, and (3) the shift of hydrate stability in pore water can be expressed as a function of the Cl⁻ concentration only. Based on the results above, an empirical equation ΔT (K)=0.00206 Cl⁻ (mmol/dm³) has been obtained for estimating the shift in the equilibrium temperature of methane hydrate in pore water at a given pressure.     

Variations in the thermal conductivities of surface sediments in the Nankai subduction zone off Tokai, central Japan

We investigated the relationship between variations in the thermal conductivity of surface sediments and the topography in the Nankai subduction zone off Tokai, central Japan, the easternmost part of the Nankai subduction zone, which has an accretionary prism with varied topography. We analyzed sediment thermal conductivity data obtained from the trough floor and accretionary prism. Variations in the thermal conductivity of sediments were related to the topographic features formed by accretionary prism development. Thermal conductivities of 1.1?W/m?K were measured on the trough floor where thick terrigenous turbidites have been deposited. The thermal conductivity of Nankai Trough floor sediments decreases from northeast to southwest along the trough, probably because of the decreased grain size and/or changes in sediment mineral composition. High thermal conductivities (??1.0?W/m?K) were measured in fault scarps on the accretionary prism. A landward increase in these values on the prism may be explained by decreased porosity of the sediments attributable to tectonic deformation during accretionary prism development. At the base of the fault scarp of the frontal thrust, low thermal conductivities (<0.9?W/m?K) were measured, likely reflecting the high porosity of the talus deposits. Low thermal conductivity (0.9?W/m?K) was also measured in slope basins on the accretionary prism, likely also related to the high porosity of the sediments. Our results demonstrate that, for accurate heat flow measurement in an area of varied topography, the geothermal gradient and the thermal conductivity of the sediments must be measured within regions with similar topographic features.     

Kinematic analysis of ultrahigh-pressure–high-pressure metamorphic rocks in the Chaglinka–Kulet area of the Kokchetav Massif, Kazakhstan

Abstract The central part of the Kokchetav Massif is exposed in the Chaglinka–Kulet area, northern Kazakhstan. The ultrahigh-pressure–high-pressure (UHP–HP) metamorphic belt in this area is composed of four subhorizontal lithological units (Unit I–IV) metamorphosed under different pressure–temperature (P–T) conditions. The coesite- and diamond-bearing Unit II, which consists mainly of whiteschist and eclogite blocks, is tectonically sandwiched between the amphibolite-dominant Unit I on the bottom and the orthogneiss-dominant Unit III on the top. Total combined thickness of these units is less than 2 km. The rocks of the UHP–HP metamorphic belt are affected by at least four deformational events post-dating peak metamorphism: (i) The earliest penetrative deformation is characterized by non-coaxial ductile flow in a NW–SE direction. The shear sense indicators in oriented samples from Unit I provide consistent top-to-the-northwest motions and those from Unit III provide top-to-the-southeast, south or south-west motions; (ii) Upright folds with subhorizontal enveloping surface refold earlier foliations including shear-indicators throughout the metamorphic belt; (iii) The third stage of deformation is denoted by large-scale bending around a subvertical axis; and (iv) Late localized fault (or shear) zones cut all earlier structures. The fault zones have subvertical shear planes and their displacements are essentially strike-slip in manner. The subhorizontal structure and opposite shear directions between Unit I and Unit III during the earlier deformation stage suggest north-westward extrusion of UHP Unit II.