Comparison of macrobenthos collected with cores and suction sampler in vegetated and unvegetated marine habitas

A comparison of shallow water benthic macrofauna collected with hand-held cores and a suction sampler shoed that the core method provided the best estimate of macrofaunal density and composition. In a bare sand habitat, suction methods collected 72.8% fewer individuals per unit surface area of sediment. The difference was 32.6% in a seagrass (Halodule wrightii) habitat. At each site the number of species collected with the two devices was similar; however, population densities of numerically important species were underestimated with the suction device resulting in effects on community statistics. In addition to high sampling efficiency and statistical advantages associated with the use of the multiple cores, ease of operation and low construction cost make simple core tubes the preferred gear for sampling small macrobenthos in soft sediments, with or without vegetation.     

Investigation of recreational boats as a source of copper at anchorage sites using time-integrated diffusive gradients in thin film and sediment measurements

Antifouling paints on small to medium recreational vessels were first recognized as an important source of pollution in the 1970s. One of the principle biocides in these paints is Cu. Results from a field program in the Gold Coast Broadwater, Queensland, demonstrate a clear correlation between recreational boat numbers at anchorage sites and water column Cu concentrations, for both time-integrated 24 h DGT measurements (n=14, r=0.815, p<0.001) and measurements on composite 0.45 mum-filtered grab samples (n=14, r=0.698, p<0.01) collected every 4 h over 24 h. At boat numbers above 30 the 0.45 microm-filterable Cu concentrations were mostly above the relevant guideline value (1.3 microgl(-1)) but the DGT-reactive Cu concentrations were well below this value at all boat numbers studied. For three-day DGT deployments in Moreton Bay, Queensland, correlations between Cu levels and vessel numbers were not observed, possibly because of uncertain estimates of boat numbers. However, using a multi-factorial ANOVA, DGT-reactive Cu concentrations showed a significant effect for 'sites with vessels vs. sites without vessels' (alpha=0.10, p=0.077) and for 'sampling period' (non-holiday weekdays, weekends, holiday weekdays, holiday weekends) at alpha=0.10, p=0.02. Cu levels in sediments at the same sites were strongly influenced by fraction of clay (<63 microm) material but also by whether the samples were collected at an anchorage or control site. Results from this study further support the view that Cu emissions from antifouling paints may become an important source in waters with high boat numbers and should be taken into account when designing management instruments for coastal waterways.     

Estimation of seismic demands on isolators in asymmetric buildings using non‐linear analysis

A procedure based on rigorous non‐linear analysis is presented that estimates the peak deformation among all isolators in an asymmetric building due to strong ground motion. The governing equations are reduced to a form such that the median normalized deformation due to an ensemble of ground motions with given corner period T_d depends primarily on four global parameters of the isolation system: the isolation period T_b, the normalized strength η, the torsional‐to‐lateral frequency ratio Ω_θ, and the normalized stiffness eccentricity e_b/r. The median ratio of the deformations of the asymmetric and corresponding symmetric systems is shown to depend only weakly on T_b, η, and Ω_θ, but increases with e_b/r. The equation developed to estimate the largest ratio among all isolators depends only on the stiffness eccentricity and the distance from the center of mass to the outlying isolator. This equation, multiplied by an earlier equation for the deformation of the corresponding symmetric system, provides a design equation to estimate the deformations of asymmetric systems. This design equation conservatively estimates the peak deformation among all isolators, but is generally within 10% of the ‘exact’ value. Relative to the non‐linear procedure presented, the peak isolator deformation is shown to be significantly underestimated by the U.S. building code procedures. Copyright © 2003 John Wiley & Sons, Ltd.     

Coarse sediment transport in mountain streams in Colorado and Wyoming,USA

Since the early 1990s, US Forest Service researchers have made thousands of bedload measurements in steep, coarse‐grained channels in Colorado and Wyoming, USA. In this paper we use data from 19 of those sites to characterize patterns and rates of coarse sediment transport for a range of channel types and sizes, including step–pool, plane‐bed, pool–riffle, and near‐braided channels. This effort builds upon previous work where we applied a piecewise regression model to (1) relate flow to rates of bedload transport and (2) define phases of transport in coarse‐grained channels. Earlier, the model was tested using bedload data from eight sites on the Fraser Experimental Forest near Fraser, Colorado. The analysis showed good application to those data and to data from four supplementary channels to which the procedure was applied. The earlier results were, however, derived from data collected at sites that, for the most part, have quite similar geology and runoff regimes. In this paper we evaluate further the application of piecewise regression to data from channels with a wider range of geomorphic conditions. The results corroborate with those from the earlier work in that there is a relatively narrow range of discharges at which a substantial change in the nature of bedload transport occurs. The transition from primarily low rates of sand transport (phase I) to higher rates of sand and coarse gravel transport (phase II) occurs, on average, at about 80 per cent of the bankfull (1·5‐year return interval) discharge. A comparison of grain sizes moved during the two phases showed that coarse gravel is rarely trapped in the samplers during phase I transport. Moreover, the movement and capture of the D₁₆ to D₂₅ grain size of the bed surface seems to correspond with the onset of phase II transport, particularly in systems with largely static channel surfaces. However, while there were many similarities in observed patterns of bedload transport at the 19 studied sites, each had its own ‘bedload signal’ in that the rate and size of materials transported largely reflected the nature of flow and sediment particular to that system. Published in 2005 by John Wiley & Sons, Ltd.     

Cu isotopic fractionation in the supergene environment with and without bacteria

The isotopic composition of dissolved Cu and solid Cu-rich minerals [δ⁶⁵Cu (‰) = (⁶⁵Cu/⁶³Cu_sample/⁶⁵Cu/⁶³Cu_std) - 1)*1000] were monitored in batch oxidative dissolution experiments with and without Thiobacillus ferrooxidans. Aqueous copper in leach fluids released during abiotic oxidation of both chalcocite and chalcopyrite was isotopically heavier (δ⁶⁵Cu = 5.34‰ and δ⁶⁵Cu = 1.90‰, respectively, [±0.16 at 2σ]) than the initial starting material (δ⁶⁵Cu = 2.60 ± 0.16‰ and δ⁶⁵Cu = 0.58 ± 0.16‰, respectively). Isotopic mass balance between the starting material, aqueous copper, and secondary minerals precipitated in these experiments explains the heavier isotopic values of aqueous copper. In contrast, aqueous copper from leached chalcocite and chalcopyrite inoculated with Thiobacillus ferrooxidans was isotopically similar to the starting material. The lack of fractionation of the aqueous copper in the biotic experiments can best be explained by assuming a sink for isotopically heavy copper present in the bacteria cells with δ⁶⁵Cu = 5.59 ± 0.16‰. Consistent with this inference, amorphous Cu-Fe oxide minerals are observed surrounding cell membranes of Thiobacillus grown in the presence of dissolved Cu and Fe.Extrapolating these experiments to natural supergene environments implies that release of isotopically heavy aqueous Cu from oxidative leach caps, especially under abiotic conditions, should result in precipitates in underlying enrichment blankets that are isotopically heavy. Where iron-oxidizing cells are involved, isotopically heavy oxidized Cu entrained in cellular material may become associated with leach caps, causing the released aqueous Cu to be less isotopically enriched in the heavy isotope than predicted for the abiotic system. Rayleigh fractionation trends with fractionation factors calculated from our experiments for both biotic and abiotic conditions are consistent with large numbers of individual abiotic or biotic leaching events, explaining the supergene chalcocites in the Morenci and Silver Bell porphyry copper deposits.     

Influence of streambed hydraulic conductivity on solute exchange with the hyporheic zone

A conservative solute tracer experiment was conducted in Indian Creek, a small urban stream in Philadelphia, Pennsylvania to investigate the role of subsurface properties on the exchange between streamwater and the hyporheic zone (subsurface surrounding the stream). Sodium Bromide (NaBr) was used as a conservative tracer, and it was monitored in the surface water at two stations and in the upper bed sediments (shallow hyporheic zone extending from 7.5 to 10 cm below the streambed). The hydraulic conductivity (K) of the upper bed sediments and the lower bed sediments (10–12.5 cm below the streambed) was measured in situ. High tracer concentrations were observed in the upper layer at locations where the hydraulic conductivity of the upper layer was larger than that of the lower layer. Low concentrations in the upper layer were observed in the converse case. A statistically significant relationship between the mass retained in the upper layer and the difference of K values between layers was observed.     

Turbulence Over Urban-type Roughness: Deductions from Wind-tunnel Measurements

Turbulence data from experiments conducted over a staggered cube array, modelling a neutrally stable atmospheric boundary layer in an urban environment, are presented. The results support the contention that organised eddy structures in the near-wall region differ significantly from those in regular smooth-wall flows or in rough-wall boundary layers with much smaller h/δ ratios (where δ and h are the boundary-layer thickness and the height of the roughness elements, respectively). Attention is concentrated on spatial correlations, spectra (and thus the dominant length and time scales), maps of anisotropy invariants and quadrant analyses of the stress tensor. Results are obtained within both the roughness sublayer (i.e. the region above the roughness but within which the flow is spatially inhomogeneous) and the canopy region (i.e. below the height of the roughness elements) and discussion includes consideration of the turbulence kinetic energy balance at various heights.     

Human Strategies for Coping with El Niño Related Drought in Amazônia

This article reports on findings of a research project examining farmers' coping strategies in the Brazilian Amazon in response to El Niño related weather events. We examine the extent of vulnerability of small and large farmers to these events in a tropical rainforest environment. Little attention has been given to the impact of ENSO events in Amazônia, despite evidence for devastating fires during ENSOs. Although we found a range of locally developed forecasting techniques and coping mechanisms, farmers have sustained significant losses, and we suggest that increased access to scientific forecasts would greatly enhance the ability of the farmers in our study area to cope with El Niño related weather events. In Amazônia the El Niño phase of the El Niño-Southern Oscillation (ENSO) climate pattern leads to an extended period of reduced rainfall (Hobbs et al., 1998). This period of reduced rainfall can result in significant agricultural losses for farmers and ranchers in the area and in increased forest flammability. We have found that the majority of our study population uses several methods of forecasting, coping with, and adapting to drought events – and they recognize the economic losses they can experience and the loss of forests through the accidental spread of fire. The poorest farmers in our study area experience El Niño related drought events as a serious threat to their livelihoods. Their vulnerability is heightened during extreme climate events and our observations revealed that all of the farmers in our study would benefit from increased availability of improved forecast information relevant to their locality and their current farming strategies. This paper examines the availability and use of forecasts, the occurrence of accidental fires and techniques to prevent fire related losses, and the coping mechanisms for dealing with El Niño related drought in the agricultural regions surrounding the cities of Altamira and Santarém, in Pará State, Brazil. Distribution of an El Niño Prediction Kit at the end of the study and a series of workshops may lead to better local information on rainfall variability and create a farmer-maintained grid of collecting stations to sensitize farmers to the variability of precipitation in the region, and on their property.