Irregular structures of the F layer at high latitudes during ionospheric heating

Results on heating the ionospheric F region above Tromsø, Norway are presented. The ionosphere was monitored by satellite tomography and amplitude scintillation methods as well as the EISCAT incoherent scatter radar. No effect of heating was observed in the daytime. In the evening and in the pre-midnight sector, noticeable tilts of the F region were observed during heating periods. The tilts overlapped the heating cone, where the electron density decreased and irregularities exceeding 10 km in size appeared. Between the heating periods the F layer was restored to its horizontal shape. The anisotropic parameters of small-scale irregularities with scale lengths of hundreds of metres were also determined. It was found that the perpendicular anisotropy points in the direction of F region plasma flow. In some cases the results can be explained by assuming that the small-scale irregularities were generated within the heating cone and drifted out of the heating region where they were subsequently observed.     

State-of-the-art of geotechnical earthquake engineering practice

Major developments in geotechnical earthquake engineering practice over the last 15 years are reviewed. The objectives of the review are to present a coherent view of the current state of practice at the highest level and to examine trends, which may shape practice in the future. Developments are described in the following areas: specification of design ground motions, dynamic response analysis, evaluation of liquefaction potential, evaluation of residual strength of liquefied soil, post-liquefaction displacement analysis, and seismic risk analysis.     

Microcracks in Basalt and Tonalite at Friction

Izvestiya, Physics of the Solid Earth - Abstract—The growth rate and size of microcracks formed in the surface layer of basalt and tonalite (granodiorite) at friction are studied using...     

Spatial variation of seismic motion induced by propagation of body waves

Spatial variation of earthquake ground motion is an important phenomenon that cannot be ignored in the design and safety of strategic structures. Several models have been developed to describe this variation using statistical, mathematical or physical approaches. The latter approach is not specific to an event. A recent contribution, which uses such an approach and called complete stochastic deamplification approach (CSDA), was developed [1]. The aim of this paper is to analyze the spatial variation of earthquake motion induced by the propagation of body waves using the CSDA. Coherency functions are evaluated for the cases of SH–SV–P waves propagating through stratified soil. Results obtained show that the variation of the coherency function is not the same for vertical and horizontal components and that the motion is more coherent at depth than at the free surface. In fact, we found that the rate of decrease with frequency and distance is not the same if P–SV waves propagate through stratified soil.     

A theoretical analysis of the observed variability of the geomagnetic dipole field

We present a detailed analysis of the Sint-800 virtual axial dipole moment (VADM) data in terms of an Ω mean field model of the geodynamo that features a non-steady generation of poloidal from toroidal magnetic field. The result is a variable excitation of the dipole mode and the overtones, and there are occasional dipole reversals. The model permits a theoretical evaluation of the statistical properties of the dipole mode. We show that the model correctly predicts the distribution of the VADM and the autocorrelation function inferred from the Sint-800 data. The autocorrelation technique allows us to determine the turbulent diffusion time τ_d=R²/β of the geodynamo. We find that τ_d is about 10–15 kyr. The model is able to reproduce the observed secular variation of the dipole mode, and the mean time between successive dipole reversals. On the other hand, the duration of a reversal is a factor 2 too long. This could be due to imperfections in the model or to unknown systematics in the Sint-800 data. The use of mean field theory is shown to be selfconsistent.     

Volatile emissions and gas geochemistry of Hot Spring Basin,Yellowstone National Park,USA

We characterize and quantify volatile emissions at Hot Spring Basin (HSB), a large acid-sulfate region that lies just outside the northeastern edge of the 640 ka Yellowstone Caldera. Relative to other thermal areas in Yellowstone, HSB gases are rich in He and H₂, and mildly enriched in CH₄ and H₂S. Gas compositions are consistent with boiling directly off a deep geothermal liquid at depth as it migrates toward the surface. This fluid, and the gases evolved from it, carries geochemical signatures of magmatic volatiles and water–rock reactions with multiple crustal sources, including limestones or quartz-rich sediments with low K/U (or ^40?Ar/^4?He). Variations in gas chemistry across the region reflect reservoir heterogeneity and variable degrees of boiling. Gas-geothermometer temperatures approach 300 °C and suggest that the reservoir feeding HSB is one of the hottest at Yellowstone. Diffuse CO₂ flux in the western basin of HSB, as measured by accumulation-chamber methods, is similar in magnitude to other acid-sulfate areas of Yellowstone and is well correlated to shallow soil temperatures. The extrapolation of diffuse CO₂ fluxes across all the thermal/altered area suggests that 410 ± 140 t d^− 1 CO₂ are emitted at HSB (vent emissions not included). Diffuse fluxes of H₂S were measured in Yellowstone for the first time and likely exceed 2.4 t d^− 1 at HSB. Comparing estimates of the total estimated diffuse H₂S emission to the amount of sulfur as SO₄²⁻ in streams indicates ~ 50% of the original H₂S in the gas emission is lost into shallow groundwater, precipitated as native sulfur, or vented through fumaroles. We estimate the heat output of HSB as ~ 140–370 MW using CO₂ as a tracer for steam condensate, but not including the contribution from fumaroles and hydrothermal vents. Overall, the diffuse heat and volatile fluxes of HSB are as great as some active volcanoes, but they are a small fraction (1–3% for CO₂, 2–8% for heat) of that estimated for the entire Yellowstone system.     

Dual high‐strength steel eccentrically braced frames with removable links

Structural damage in buildings designed according to the dissipative design philosophy can be significant, even under moderate earthquakes. Repair of damaged members is an expensive operation and may affect building use, which in turn increases the overall economic loss. If damage can be isolated to certain dissipative members realized to be removable following an earthquake, the repair costs and time of interruption of building use can be reduced. Dual structural configurations, composed of a rigid subsystem with removable ductile elements and a flexible subsystem, are shown to be appropriate for the application of removable dissipative element concept. Eccentrically braced frames with removable links connected to the beams using flush end‐plate bolted connections are investigated as a practical way of implementing this design concept. High‐strength steel is used for members outside links in order to enhance global seismic performance of the structure by constraining plastic deformations to removable links and reducing permanent drifts of the structure. Copyright © 2008 John Wiley & Sons, Ltd.     

Intelligent seismoacoustic system for monitoring the beginning of anomalous seismic process

An intelligent system for monitoring anomalous seismic processes intended for predicting the beginning of an earthquake by standard ground-based stations is presented. The problem is solved by analyzing the seismoacoustic signals coming from deep layers of the Earth. The signals are detected by acoustic sensors placed at the mouths of deep suspended wells.     

Falling sphere observations of anisotropic gravity wave motions in the upper stratosphere over Australia

A study of inertial scale gravity wave motions in the region of the atmosphere between 30 and 60 km has been undertaken, using wind and temperature data derived from rocket-borne falling sphere density experiments performed over Woomera, Australia between 1962 nad 1976. The gross features of the wave field compare favorably with those found in similar northern hemispheric studies. Wave propagation is found to be both vertically and horizontally anisotropic. A rotary spectral analysis indicates predominately upgoing wave energy, suggesting that the majority of sources of these waves lie below 30 km. A detailed statistical investigation of the waves, made using the Stokes parameters technique, reveals that phase progression is also highly directional in the horizontal, with a significant zonal component in summer, but with a strong meridional component in winter. Propagation towards the southeast is inferred in summer, with the waves possibly emanating from tropospheric sources in equatorial regions to the north of Australia. The technique also shows that, on average, the waves appear to have mean ellipse eccentricities (=f/) around 0.4–0.45. Indirect estimates of a number of important wave parameters are made. In particular,v andw flux estimates are made over several height intervals. The vertical gradient of density weighted flux implies wave-induced mean flow accelerations of the order 0.1–1 ms^–1day^–1. This suggests that dissipating gravity waves are a significant source of the momentum residuals that are encountered in studies of satellite data from this region.