成山头海域潮流能资源可开发量评估

针对潮流能资源较丰富的成山头外海域,利用FVCOM数值模式,在良好模拟该海域潮流场的基础上,运用能量耗散原理,对该海域的潮流能资源可开发量进行了评估。结果表明,在转换装置的拖拽系数为0.07时,面积为27km2的成山头近岸海域的可开发潮流能资源约为17.9MW,其中大潮期间的可开发量高达37.7MW,而小潮期间则为7.3MW。在此条件下,该海域大潮期间涨急和落急时刻的流速分别减小了40%和38%,但发电装置对潮汐的影响较小,在成山头顶端的高潮潮位仅下降了4cm。     

新疆叶城柯克亚8～3.85Ma沉积地层中常量和微量元素分布对气候演化的响应

柯克亚剖面位于青藏高原西北缘新疆叶城县柯克亚乡,出露的地层由老到新为乌恰群、阿图什组和西域组,总厚度为2 217.9 m。在野外地层剖面详细实测与沉积相研究的基础上,系统采集了柯克亚剖面上8~3.85 Ma间沉积地层的地球化学样品并进行了常量和微量元素的测试和分析。剖面沉积物中元素平均值与上部陆壳(UCC)元素平均质量分数比揭示了研究区在8~3.85 Ma期间总体较为干旱寒冷的气候环境特征。在此基础上,结合具有较好指示作用的元素变化特征,根据CIA、w(CaO)/w(Sr)、w(Rb)/w(Sr)、w(CaO)/w(MgO)比值的变化将研究区的古气候变化分为3个阶段:剖面自下向上0~222 m(乌恰群第1~7层,年龄为8~7.3 Ma)为冷干气候;222~419 m(乌恰群第8~15层,年龄为7.3~6.6 Ma)为暖湿—冷干交替的气候;419~1 665 m(乌恰群第16层~阿图什组第24层,年龄为6.6~3.85 Ma)气候更为冷干。根据古气候研究结果推测青藏高原在8 Ma前已经隆升到了一定的高度,阻挡了来自印度洋的夏季风的北上,导致塔里木盆地干旱化。约6.6 Ma前气候的进一步变干可能与青藏高原的进一步隆升和来自西伯利亚的冬季风的进一步加强有关。     

安徽南部桃冲地区铁矿床控矿构造分析

通过对桃冲地区典型铁矿床的赋存环境及构造特征的研究和控矿因素分析,认为红花山背斜两翼的铁矿体产于背斜的层间断裂带中的次级褶曲内,受"碳酸盐岩地层+次级褶曲+层间断裂带"三个控矿因素的制约,环滨江岩体的铁矿床受厚层状矽卡岩接触带的制约。综合桃冲地区控矿因素的特点,提出了找矿有利部位。     

例解供销在企业发展中的地位

通过产品供销中两个案例的分析,提出了新的产品供销理念,以及现代企业产品供销原则。指出产品供销和售后服务、用户信息及产品应用中信息的捕捉是新产品研发、产品质量提高的重要依据,从而强调了产品供销在企业发展中的作用与地位。     

中国铁路运输33年来的温室气体排放

铁路是我国重要的交通运输方式,但我国至今尚无铁路运输行业温室气体排放量的报道.文章基于我国铁路部门逐年统计数据,计算了 1975～2007年我国铁路机车的温室气体排放量,分析了我国铁路机车温室气体排放强度及其变化特点.结果表明,我国铁路机车温室气体(CO2和N2O)总排放量逐年降低,由1975年的4278×104t CO2当量降至2007年的3844×104t CO2当量,总降幅达10%,年均减排14×104t CO2当量.其中,CO2年排放量整体呈下降趋势,由1975年的4246×104t降至2007年的3645×104t,总降幅达14%,年均减排18.8×104t; N2O年排放量快速增长,由1975年的1088t增至2007年的6681t,年均增加175t,达16%.由于我国铁路蒸汽机车承担的牵引工作量越来越少,其温室气体年排放量逐年降低,1975～2001年年均减少155×104t CO2当量,降幅达3.7%.2002年以后,蒸汽机车基本上从运输领域中被全部淘汰,无温室气体排放.1975～2007年内燃机车和电力机车的排放比重越来越大,其温室气体年排放量逐年上升,内燃机车年均增加54×104t CO2当量,电力机车间接排放量年均增长62×104t CO2当量.温室气体排放强度呈现明显降低趋势,其值由1975年的8.23kg降至2007年的1.34kg CO2当量/百换算吨公里,降幅达84%,年均降低0.22kg CO2当量/百换算吨公里.其中,内燃机车、电力机车和蒸汽机车的温室气体平均排放强度分别为1.51kg,1.68kg和8.74kg CO2当量/百换算吨公里.大规模淘汰排放强度大的蒸汽机车,同时大量运用排放强度低的内燃机车和电力机车,使得我国铁路机车的温室气体排放量和排放强度不断降低,这为减少我国铁路运输行业的温室气体排放作出了重要贡献.另外,我国铁路机车温室气体排放量占全国化石燃料燃烧的温室气体排放总量的比重很小,因此可以说铁路运输是我国交通运输领域中理想的节能减排运输方式.     

地震过程中斜坡滑动破坏实验分析

为了研究地震引起的斜坡滑动破坏规律及其位移、应变的变化规律,利用数字散斑相关方法(DSCM),对主要受水平方向地震动荷载作用下的斜坡进行了实验模拟。结果表明,斜坡的破坏首先从模型底部弱面位置开始,沿弱面逐渐扩展,最终破坏;斜坡所含弱面的深度,对破坏过程有重要的影响。     

对滇藏铁路三江段工程地质问题的深化认识

滇藏铁路三江段东起云南省丽江城,西至西藏自治区八宿县城,是铁路建设最艰难的地段,特别是工程地质问题纷繁复杂。通过作者近几年来的工作,取得了对该区基础地质问题的一些新认识,据此从根本上来认识铁路可能存在的工程地质问题。三江地区广泛分布的地层岩性是古生界灰岩和中生界砂质泥岩,灰岩往往呈岛状被中生界砂质泥岩所围陷,以及燕山晚期岩浆岩。地震与活动断裂关系不密切,调查中未见区域性大断裂迹象。综合分析三江段存在的深层次铁路工程地质问题有:灰岩区岩溶引起的工程地质问题、碎屑岩区易溶盐析出引起的工程地质问题、坐滑体内工程地质问题、地震引起的工程地质问题、高地温区工程地质问题和劈理化带引起的工程地质问题,各类工程地质问题之间相互联系。工程地质问题严重的地段有玉龙县拉市海至香格里拉县虎跳镇街段、德钦县白马雪山段、德钦县梅里雪山段和八宿县冷曲段,对这些地段的工程地质问题应开展深入研究并采取工程对策。     

汶川地震地表破裂面形貌特征

准确描述破裂面形貌对于我们理解地震断层作用是非常重要的,破裂面的形貌特征包含许多关于地震和断层机制的有用信息。在Mw7.9 2008汶川地震中断层活动产生了两个新鲜的破裂面,八角庙破裂面和沙坝破裂面。我们使用3D便携式激光扫描仪(Tri mble GX)对两个破裂表面进行测量,在野外微观尺度上研究了破裂面形貌特征。通过能谱密度和均方值两个方法分析破裂面形貌,新鲜的破裂面表现为自相仿性,能谱密度和均方值均与剖面长度存在幂律关系。在能谱密度与空间频率的对数图中,能谱密度曲线存在明显的拐点,该拐点所对应的波长称为"特征波长",表明单一分形不能准确描述破裂面形貌。八角庙破裂面在平行滑动方向上的特征波长为7 mm,在垂直方向上特征波长略大一些(区域Ⅰ为10 mm,区域Ⅱ为9 mm);沙坝破裂面在平行滑动方向上的特征波长为8 mm,但垂直方向上特征波长略小(6 mm)。均方值曲线的最小二乘拟合直线的斜率为Hurst指数,该指数依赖于剖面线方向并描述破裂面形貌的各向异性,H指数的最小值和最大值分别与平行擦痕和垂直擦痕方向对应,这与野外断层面擦痕测量结果一致。沙坝破裂面的H指数极坐标图中存在次级H指数峰值(对应剖面线方向为85°和160°),这揭示破裂面上存在一组隐匿擦痕。该组隐匿擦痕为汶川地震之前断层活动中形成的,但这还不足以推测上一次断层活动的时间和规模。另外,通过比较新鲜节理面和破裂面表明H指数是否大于0.8反映了断层类型。在整个空间频率域上,能谱密度曲线斜率(-α)和均方值曲线斜率(H)的线性拟合关系为α=1.22+1.72H,并不严格满足两者之间理论关系式,α=1+2H。这个差异是由于测量信号噪音、破裂面的多分形性和分析方法的差异造成的。     

Zircon U–Pb ages and tectonic implications of Paleozoic plutons in northern West Junggar,North Xinjiang,China

North Xinjiang, Northwest China, is made up of several Paleozoic orogens. From north to south these are the Chinese Altai, Junggar, and Tian Shan. It is characterized by widespread development of Late Carboniferous–Permian granitoids, which are commonly accepted as the products of post-collisional magmatism. Except for the Chinese Altai, East Junggar, and Tian Shan, little is known about the Devonian and older granitoids in the West Junggar, leading to an incomplete understanding of its Paleozoic tectonic history. New SHRIMP and LA-ICP-MS zircon U–Pb ages were determined for seventeen plutons in northern West Junggar and these ages confirm the presence of Late Silurian–Early Devonian plutons in the West Junggar. New age data, combined with those available from the literature, help us distinguish three groups of plutons in northern West Junggar. The first is represented by Late Silurian–Early Devonian (ca. 422 to 405 Ma) plutons in the EW-striking Xiemisitai and Saier Mountains, including A-type granite with aegirine–augite and arfvedsonite, and associated diorite, K-feldspar granite, and subvolcanic rocks. The second is composed of the Early Carboniferous (ca. 346 to 321 Ma) granodiorite, diorite, and monzonitic and K-feldspar granites, which mainly occur in the EW-extending Tarbgatay and Saur (also spelled as Sawuer in Chinese) Mountains. The third is mainly characterized by the latest Late Carboniferous–Middle Permian (ca. 304 to 263 Ma) granitoids in the Wuerkashier, Tarbgatay, and Saur Mountains.As a whole, the three epochs of plutons in northern West Junggar have different implications for tectonic evolution. The volcano-sedimentary strata in the Xiemisitai and Saier Mountains may not be Middle and Late Devonian as suggested previously because they are crosscut by the Late Silurian–Early Devonian plutons. Therefore, they are probably the eastern extension of the Early Paleozoic Boshchekul–Chingiz volcanic arc of East Kazakhstan in China. It is uncertain at present if these plutons might have been generated in either a subduction or post-collisional setting. The early Carboniferous plutons in the Tarbgatay and Saur Mountains may be part of the Late Paleozoic Zharma–Saur volcanic arc of the Kazakhstan block. They occur along the active margin of the Kazakhstan block, and their generation may be related to southward subduction of the Irtysh–Zaysan Ocean between Kazakhstan in the south and Altai in the north. The latest Late Carboniferous–Middle Permian plutons occur in the Zharma–Saur volcanic arc, Hebukesaier Depression, and the West Junggar accretionary complexes and significantly postdate the closure of the Irtysh–Zaysan Ocean in the Late Carboniferous because they are concurrent with the stitching plutons crosscutting the Irtysh–Zaysan suture zone. Hence the latest Late Carboniferous–Middle Permian plutons were generated in a post-collisional setting. The oldest stitching plutons in the Irtysh–Zaysan suture zone are coeval with those in northern West Junggar, together they place an upper age bound for the final amalgamation of the Altai and Kazakhstan blocks to be earlier than 307 Ma (before the Kaslmovian stage, Late Carboniferous). This is nearly coincident with widespread post-collisional granitoid plutons in North Xinjiang.     

Investigation of the sulfur speciation during chalcopyrite leaching by moderate thermophile Sulfobacillus thermosulfidooxidans

The surface sulfur speciation of chalcopyrite leached by moderately thermophilic Sulfobacillus thermosulfidooxidans was investigated by employing scanning electron microscopy (SEM), X-ray diffraction (XRD) and sulfur K-edge X-ray absorption near edge structure spectroscopy (XANES), accompanying with the leaching behavior elucidation. Leaching experiment showed that there was an optimum range of the redox potential for chalcopyrite dissolution. Leaching products were found accumulating during the leaching process, which might be jarosite according to the XRD analysis. The sulfur K-edge spectra indicated that chalcocite might be the intermediate sulfur compound under a critical redox potential, which might explain the existence of optimum range of the redox potential and provide an evidence for the two-step leaching model of chalcopyrite at low Eh. In addition, the results of sulfur K-edge spectra showed jarosite would accumulate on mineral surface, which might be the main component of the passivation layer.